• Journal of Powder Materials
• /
• v.21 no.4
• /
• pp.256-259
• /
• 2014

A magnetic powder, M-type barium hexaferrite (BaFe12O19), was consolidated with the spark plasma sintering process. Three different holding temperatures, $850^{\circ}C$, $875^{\circ}C$ and $900^{\circ}C$ were applied to the spark plasma sintering process with the same holding times, heating rates and compaction pressure of 30 MPa. The relative density was measured simultaneously with spark plasma sintering and the convergent relative density after cooling was found to be proportional to the holding temperature. The full relative density was obtained at $900^{\circ}C$ and the total sintering time was only 33.3 min, which was much less than the conventional furnace sintering method. The higher holding temperature also led to the higher saturation magnetic moment (${\sigma}_s$) and the higher coercivity ($H_c$) in the vibrating sample magnetometer measurement. The saturation magnetic moment (${\sigma}_s$) and the coercivity ($H_c$) obtained at $900^{\circ}C$ were 56.3 emu/g and 541.5 Oe for each.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1447-1458
• /
• 2009

Volatile extracts obtained from traditional Chinese-type soy sauces prepared with soybean (SSSB) and defatted soy meal (SSDSM) by solid phase microextraction (SPME) and direct solvent extraction (DSE) were analyzed by gas chromatography-mass spectrometry (GC-MS). The volatile flavor compounds and relative contents of different chemical classes detected in SSSB and SSDSM were compared for their differences. Results showed that significant differences in both constituents of volatile flavor compounds and relative contents of different chemical classes were observed for both kinds of soy sauces. A total of 152 and 131 compounds were identified in SSSB and SSDSM, respectively, and 102 volatile flavor compounds were common in both kinds of soy sauces. Moreover, relative contents of acids, aldehydes, esters, furan(one)s, miscellaneous compounds, phenols, pyrazines, pyrrol(idinon)es, and sulfur-containing compounds in both kinds of soy sauces were all significantly different.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.9
• /
• pp.1422-1428
• /
• 2006

An ABC transporter apparatus of the Gram-negative bacterial type I secretion pathway can be used as a secretory protein expression system in Escherichia coli. Four types of coexpression systems for the Pseudomonas fluorescens lipase gene, tliA, and its cognate ABC transporter gene cluster, tliDEF, were constructed. When the relative expression levels were changed by adding different concentrations of IPTG, the secretion (16.9 U/ml of culture) of TliA in E. coli [pTliDEFA-223+pACYC184] was significantly higher than E. coli [pKK223-3+pTliDEFA-184] secreting the lowest level of TliA (5.2 U/ml of culture). Maximal accumulation of the lipase secreted occurred in the mid-exponential phase, implying that the efficient protein secretion via an ABC transporter was restricted only to actively growing cells. Finally, the secretion level of TliA in E. coli [pTliDEFA-223+pACYC184] was increased to 26.4 U/ml by inducing gene expression at the culture initiation time. These results indicate that a significant increase in the ABC transporter-dependent protein secretion can be achieved by simply controlling the relative expression levels between the ABC transporter and its passenger protein, even in the recombinant E. coli cells.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.297-300
• /
• 2006

In this paper, the EM wave absorbers were designed and fabricated for X-band sensors using Carbon of dielectric material with CPE. The complex relative permittivity of samples is calculated by the measured S-parameter data. We simulated the double-layered type EM wave absorber with broad bandwidth using the measured complex relative permittivity by changing the thickness and layer, which was fabricated based on the simulated design. The fabricated EM wave absorber consist of 1mm first layer sheet facing metal with Carbon composition ratio 70 vol% and 1.5 mm second layer sheet with Carbon composition ratio 60 vol%. The comparisons of simulated and measured results are good agreement. As a result, the optimized absorption ability of double-layered type EM wave absorber with thickness of 2.5 mm is higher than 10 dB from 7.8 GHz to 13.3 GHz.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.593-601
• /
• 2020

Two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of impermeable-type submerged structures armored by concrete blocks. Different experimental conditions were included by considering relative crest depth, relative freeboard, relative crest width, wave steepness, and so on. An empirical formula was proposed to predict the wave transmission coefficients over various specifications and structural designs of the impermeable submerged structure from the experimental results. The proposed formula successfully predicted the wave transmission coefficients. Therefore, in this study, the proposed empirical formula of the wave transmission over an impermeable submerged structure was improved from the existing formula.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.309-313
• /
• 1997

The SIV(Static InVerter) of the electric coach mainly consists of GTO type inverter. But, it is the drawback that GTO type inverter must have the complicated driving circuits. Recently, appearing the IGBT of high speed switching frequency, simple driving circuits, relative large capacity, GTO type inverter is changed IGBT type inverter. In this paper, IGBT type SIV substituting for the existing GTO type SIV is designed and producted. The experimental results are presented to verify the performance of the designed IGBT type SIV.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.120-125
• /
• 2003

For this study grasp coverage condition and forest stratification to various green space, observed air temperature and relative humidity. With this data, coverage condition and air temperature, relative humidity distribution, analyzed relationship of forest rate and air temperature or relative humidity, tree numbers and green volume and humidity by revolution analysis. In this result, higher none is formed artificiality and barren area, lower zone did fores and water area. Relative humidity have corresponding type of air temperature distribution. lower Tone was higher humidity. Different of Idlest type or water area, surround of forest showed relatively higher humidity. Increasing tree numbers or green volume effect higher humidity and this efficiency order of an arbor, subarbor, shrub.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.3
• /
• pp.260-265
• /
• 2013

Impressed current cathodic protection (ICCP) system is one of the most promising corrosion protection methods. The Effect of ICCP system can be changed at diverse conditions. Particularly, temperature and relative humidity plays a crucial role in CP (Cathodic Protection) effect. Thus, in this study, the influence of temperature and relative humidity on concrete specimens was investigated. Specimens were concrete slab type with a base of $400mm{\times}400mm$ and height of 70mm. To enhance the effect of CP system, seawater was used as an electrolyte. Used anode for ICCP system was mixed metal oxide (MMO) titanium. Test factors were natural potential, CP potential, CP current, and 4-hour depolarization potential. From this study, it could be confirm that CP potential and current were highly influenced by temperature and relative humidity.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.185-192
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Since the motion of the cam mechanism depends on the shape of the cam and the type of the follower, the shape design procedure must be well defined in order to determine the accurate shape of the cam corresponding to the prescribed motion of the follower. This paper proposes a new approach for designing the shape of disk cams. The proposed relative velocity method uses the relative velocity at center of the follower roller or at contact point between the cam and the follower for 4 different types of the disk cam systems. Also, the relative velocity method for determining the cam profile uses the geometric relationships of the cam and the follower.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.300-307
• /
• 2008

Event source locating is very important to improving the power quality level. This paper presents a method to determine the relative location of the voltage sag source according to the cause. For this, the concept of the relative location of the source is defined first. Then, the main causes of voltage sag are classified and their characteristics are discussed. From these investigations, the rules to determine the relative location of event source are proposed for each type and the overall algorithm to identify the relative location and the kind of event source is presented. Finally, the proposed method is applied to the IEEE 13-bus test system and it is verified that the method can help to pinpoint the accurate location of the event source.