• KDI Journal of Economic Policy
• /
• v.33 no.4
• /
• pp.1-25
• /
• 2011

Available evidence suggests that the average marginal propensity to consume (MPC) from the 2001 tax rebate in the US was not nearly as large as that from previous tax cuts. We examine if this phenomenon can be explained by the fact that the widespread use of credit cards has made borrowing accessible for most US households by constructing a model that simulates the dynamic effect of relaxed borrowing constraints. Our model uses Kreps-Porteus preferences which account for independent measures of relative risk aversion and the elasticity of intertemporal substitution, both of which can theoretically affect the willingness to save or spend. Our model shows that the average MPC drops substantially immediately after borrowing constraints are relaxed because few consumers have binding borrowing constraints at that time. The model also shows that consumers gradually reduce their wealth after borrowing constraints are relaxed, causing more of them to have binding constraints over time, which in turn causes the average MPC to rise gradually to a new steady state value that is slightly lower than the original value. This dynamic pattern of the MPC suggests that a greater ability to borrow with credit cards could explain the lower effectiveness of the 2001 tax rebate. In addition, the model predicts that consumers choose to hold lower amounts of liquid assets for precautionary reasons when they have a greater ability to borrow unsecured debt.

• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.459-466
• /
• 2012

The objective of this study is to observe growth pattern of grand rapids(lettuce) according to different dexperimental conditions for minimizing its growth period such as composition of nutrient, irradiation time of light source and cultivation mode. The culture of water spray type using seeds of grand rapids was performed during growth period of total 50 days. Experimental conditions consist of five compositions of nutrient (PW 0.5 mS/cm, PW 1.0 mS/cm, PY 0.5 mS/cm, PY 1.0 mS/cm, PW 2.0 mS/cm) and three irradiation times of light source (12h(on) / 12h(off), 18h(on) / 06h(off), 24h(on) / 00h(off)). Illumination was adjusted to ratio of 7:1:1 of red, blue and white color, respectively. Indoor environmental condition for cultivating grand rapids is as follows: temperature (19-$22^{\circ}C$), relative humidity (60-70%) and carbon dioxide (1,000-1,200 ppm). The data were obtained from five iteration tests. The maximum growth level was observed in the experimental condition of 18 hr(on) / 06 hr(off) and PY 1 mS/cm for 1st week of cultivation period, 24 hr(on) / 00 hr(off) and PY 1mS/cm for 2nd week of cultivation period, and 24 hr(on) / 00hr(off) and PW 1 mS/cm for 3rd week of cultivation period, respectively. On the contrary, the minimum growth level was observed in the experimental condition of 18 hr(on) / 06 hr(off) and PW 0.5 mS/cm for 1st week of cultivation period, 12 hr(on) / 12 hr(off) and PW 0.5 mS/cm for 2nd week of cultivation period, and 12 hr(on) / 12 hr(off) and PY 0.5 mS/cm for 3rd week of cultivation period, respectively. Based on the results obtained from this study, it is concluded that the growth level of grand rapids varied with different irradiation time of light source and composition ratio of nutrient according to cultivation period.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.393-400
• /
• 2010

The parasitism, development time, hatchability, and progeny production of Trichogramma chilonis(TC) females developed in eggs of Helicoverpa assulta (HAs), Cadra cautella (CC), and Helicoverpa armigera (HAr), respectively, were compared with those developed in reciprocal eggs at constant temperatures of $25{\pm}2^{\circ}C$ and relative humidity of 50~70% under 16L-8D. Developmental performances of TC reared in each of the three hosts on the following hosts(host tested) appeared differently, and were affected most by the size of the proceeding hosts and test host. Among the parameters parasitism and progeny production were affected more than others. Parasitism was significantly different between the treatments, lowest in CC-HAr($10.1{\pm}2.05%$) and highest in HAr-HAs($47.0{\pm}2.09%$), and the hatchability showed similar pattern. Development time as well was shortest in the CC-HAr where previous host is smallest and test host is biggest. The highest number of progeny production of TC was observed in HAr-HAs($93.9{\pm}6.87$ wasps), and the lowest was CC-HAs($18.4{\pm}6.36$ wasps).

• BMB Reports
• /
• v.41 no.12
• /
• pp.846-851
• /
• 2008

This study was conducted to identify marbling-related candidate genes in M. longissimus dorsi of high- and low-marbled Hanwoo. The longissimus dorsi muscles were selected for gene expression from eight Hanwoo steer carcasses based on crude fat content. In the analysis of variance, gene expression of five candidate genes, FABP4, SCD, $PPAR\gamma$, Titin and Nebulin was determined to be significantly different between high- and low-marbled Hanwoo steers (P < 0.0001). The Pik-4 and CaMK II genes were also shown to have a significant effect on crude fat content (P < 0.01). In the analysis of the differential expression between high- and low marbled groups, FABP4 gene expression was approximately 2 times higher in the high marbled group relative to the low marbled group. However, the $PPAR\gamma$ and SCD gene were highly expressed in the low marbled group. In addition, Titin and Nebulin were highly expressed in the low marbled group when placed under relatively high shear force. Finally, the Pik-4 and CaM K II gene also displayed a high expression pattern in the low marbled group.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• Journal of Korea Port Economic Association
• /
• v.25 no.4
• /
• pp.21-44
• /
• 2009

This study aims to understand the conditions for using logistics outsourcing of Korean enterprises, present existing problems, examine factors affecting utility, and analyze the pattern of logistics outsourcing based on contract term, and to ultimately contribute to enhancing competitiveness of logistics enterprises. Through the literature survey 8 factors were identified as three broad factors of corporate strategy, corporate characteristics, and environment. Factor analysis was conducted on the bases of 155 collected data among 400 distributions for 2 months from April to May in 2008. From the result of analysis, the implication and finding can be summarized into three aspects. Firstly, Korean companies value factors relative to corporate strategies as motivating factors for logistics outsourcing. Secondly, Korean companies consider logistics outsourcing depending on how to handle customers' demands and the severity of competition. Thirdly, it was found that product and organization characteristics are perceived as more important when contract term with logistics business is longer. The implications can be observed into two aspects. Firstly once the logistics outsourcing between manufacturers and logistics companies are determined, it was verified that mutual agreement, particular contracts and periodic communications can increase the outcome. Secondly the logistics outsourcing appeared to be different depending on the level of entering to foreign market and resulted in higher performance as well.

• Korea journal of population studies
• /
• v.20 no.2
• /
• pp.67-98
• /
• 1997

This study examines multi-level factors geographic proximities between elderly parents and their children in the United States and Japan. Despite their similar economies, the United States and Japan show a significant difference in their patterns of generational proximity. In 1993, half of US non-Hisapnic white parents aged 70 or over lived separately but within 10 miles of their nearest children and a majority of them lived far from their non-nearest children. The family geographic network for Japanese elderly parents is more hierarchial. In 1989, 74 percent of Japanese parents aged 70 and over lived with their nearest children but most of them lived far from their non-nearest children. To explain this distinctive pattern of inter- and intra-family differences in generational proximities in the two societies, this study employs a multi-level analysis which compares the relative importance of life course conditions of elderly parents and their children and economic and ecological characteristics of elderly parent's places of residence in influencing generational proximities.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.227-232
• /
• 2014

Ageratina altissima is an invasive plant species known to threaten native plant communities in Korea. A. altissima is thought to invade shady forests from disturbed open areas; however, uncertainty remains as to how shade and litter depth might affect establishment. A study of A. altissima distribution characteristics in areas adjacent to trails was undertaken at Mt. Umyeon in Seoul, Korea. Increasing densities of A. altissima were found to correlate with greater light availability and decreasing litter depth (p < 0.001) within 10 m distance from trail locations and on ridges rather than further within forests and valleys. The effects of soil moisture content, soil gravel content and soil pH on distribution were not found to be significant, suggesting that A. altissima is adaptable to a broad range of soil conditions. Results indicate that forest areas close to trails may be particularly susceptible place to A. altissima invasion, demonstrating the need to carefully consider implications for A. altissima expansion in trail management.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.6
• /
• pp.394-401
• /
• 2012

Objectives: Diabetes and obesity each increases mortality, but recent papers have shown that lean Asian persons were at greater risk for mortality than were obese persons. The objective of this study is to determine whether an interaction exists between body mass index (BMI) and diabetes, which can modify the risk of death by cardiovascular disease (CVD). Methods: Subjects who were over 20 years of age, and who had information regarding BMI, past history of diabetes, and fasting blood glucose levels (n=16 048), were selected from the Korea Multi-center Cancer Cohort study participants. By 2008, a total of 1290 participants had died; 251 and 155 had died of CVD and stroke, respectively. The hazard for deaths was calculated with hazard ratio (HR) and 95% confidence interval (95% CI) by Cox proportional hazard model. Results: Compared with the normal population, patients with diabetes were at higher risk for CVD and stroke deaths (HR, 1.84; 95% CI, 1.33 to 2.56; HR, 1.82; 95% CI, 1.20 to 2.76; respectively). Relative to subjects with no diabetes and normal BMI (21 to 22.9 $kg/m^2$), lean subjects with diabetes (BMI <21 $kg/m^2$) had a greater risk for CVD and stroke deaths (HR, 2.83; 95% CI, 1.57 to 5.09; HR, 3.27; 95% CI, 1.58 to 6.76; respectively), while obese subjects with diabetes (BMI ${\geq}25kg/m^2$) had no increased death risk (p-interaction <0.05). This pattern was consistent in sub-populations with no incidence of hypertension. Conclusions: This study suggests that diabetes in lean people is more critical to CVD deaths than it is in obese people.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based chemical sensor was developed on a $41^{\circ}YX\;LiNbO_3$ piezoelectric substrate for simultaneous measurement of $CO_2$ gas and relative humidity (RH) using a reflective delay line pattern as the sensor element. The reflective delay line is composed of an interdigital transducer (IDT) and several shorted grating reflectors. A Teflon AF 2400 and a hydrophilic $SiO_2$ layer were used as $CO_2$ and water vapor sensitive films. The coupling of mode (COM) modeling was conducted to determine optimal device parameters prior to fabrication. According to simulation results, the device was fabricated and then wirelessly measured using the network analyzer. The measured reflective coefficient $S_{11}$ in the time domain showed high signal/noise (S/N) ratio, small signal attenuation, and few spurious peaks. In the $CO_2$ and humidity testing, high sensitivity ($2^{\circ}/ppm$ for $CO_2$ detection and $7.45^{\circ}/%$RH for humidity sensing), good linearity and repeatability were observed in the $CO_2$ concentration ranges of $75{\sim}375ppm$ and humidity levels of $20{\sim}80%$RH. Temperature and humidity compensations were also investigated during the sensitivity evaluation process.