• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.134-135
• /
• 2016

This study aims to compare relative moisture content and gravity moisture content in calculating the rational percentage of moisture content. High-strength concrete, which is made of blast-furnace slag and silica fume, was used as the compound for this study, and the specimens were made into a saturated condition through the vacuum suction. According to the results of this study, all specimens were completely dried when they were under the temperature of 105℃ for more than 31 days. They were fully saturated after 72 hours through vacuum suction. In addition, relative moisture content responded more sensitively to moisture content than gravity moisture content did, so it can be concluded that relative moisture content is better in calculating the rational percentage of moisture content.

• 한국포장학회지
• /
• 제11권2호
• /
• pp.91-96
• /
• 2005

Determination of safety factor of corrugated fiberboard boxes used for agricultural products is very complicated process due to nature of living products. Moisture content is one of the most critical factors to determine overall physical strength of paper, so its influences on strength properties of corrugated board made from different raw materials must be quantified. The results obtained from the study were summarized as follows; 1. Results show a detrimental effect on bursting strength and compressive strength of liners with increasing relative humidity of environment and moisture content of liners. 2. The relevance of equilibrium moisture content at varying relative humidity levels was proved and its relationship was used as an important factor to estimate box compression strength. 3. Test results was statistically used for establish the relationship between relative humidity and moisture content of liners. Estimated compression strength of boxes at varying moisture content was similar to results of theoretical equations such as Kellicutt's. Further study could be carried out in order to determine a optimum safety factors of various corrugated board boxes for agricultural products.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.95-101
• /
• 2005

Adsorption and desorption experiments were carried out on rough rice and brown rice (Nampyung) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 8.7 and $25\%$ (db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey and the modified Oswin model. The ERHs of rough rice and brown rice decreased with an decrease in moisture content and temperature, and the effects of temperature was no significant at moisture content of $25\%$ (db). Equilibrium moisture content (EMC) of brown rice was higher than rough rice at same temperature and relative humidity. Desorption EMC is higher than the adsorption, but there is no significant difference between desorption and adsorption EMC in moisture content near $25\%$ (db) at rough rice and near 9, 21 and $25\%$ (db) at brown rice. The modified Oswin model was the best in describing the adsorption EMC and the modified Chung-Pfost model was the best in describing the adsorption ERH of rough rice. The modified Oswin model was the best in describing the adsorption EMC/ERH of brown rice. The modified Chung-Pfost model was the best in describing the desorption EMC/ERH of rough rice and brown rice.

• 한국지반공학회논문집
• /
• 제18권3호
• /
• pp.13-21
• /
• 2002

0.5% ~ 4.0%의 함수비를 가진 습윤모래의 인장강도 변화를 조사하기 위하여 개발된 인장 시험기를 이용한 일련의 실험을 수행하였다. 이러한 실험을 통하여 함수비, 상대밀도, 세립자 함유량 및 Precompression수준에 따라 모래의 인장강도는 변화하는 것으로 조사되었다. 함수비와 세립자 함유량이 증가함에 따라 인장강도는 증가하는 것으로 나타났다. 특히, 상대밀도가 증가함에 따라 인장강도의 증가 경향은 더욱 분명하게 나타났다. 그러나, 인장강도에 대한 상대밀도와 세립자의 효과는 실질적으로는 함수비에 따라 결정됨을 알 수 있었다. 낮은 함수비(w < 0.5%) 에서 모래의 인장강도에 미치는 상대밀도와 세립자의 영향은 감소하는 것으로 나타났다. 또한, 인장강도에 미치는 Precompression 효과도 실질적으로는 함수비에 의해 결정되며, Precompression의 크기와 기간의 영향은 상대적으로 적게 나타났다.

• 한국포장학회지
• /
• 제4권1호
• /
• pp.23-32
• /
• 1997

The change in moisture content of moisture sensitive products in moisture-semipermeable packages was investigated for the purpose of predicting the shelf life of a product-package combination. A mathematical model, and a computer program based on the physiochemical properties of the product and the moisture permeability of the package was developed. The moisture content for products in moisture-semipermeable packages was determined under various environmental conditions and the results were compared with the predicted values by means of the simulation model. These experimental studies demonstrated that the prediction of the change in moisture content of packaged products over time by the simulation model is accurate, within a practical range of temperature and relative humidity values. The developed semi-empirical model is considered to have applications in industry, since it provides product shelf life information for a range of temperature and relative humidity conditions, with a limited number of experimentally obtained data points.

• 한국식품영양학회지
• /
• 제11권2호
• /
• pp.221-227
• /
• 1998

본 연구는 냉장우육의 수분함량, 상대습도, pH, 색도 및 색소의 상관관계를 검토하였다. 등심과 사태의 표면 및 내부의 수분함량과 상대습도는 저장 중 일률적인 변화를 보이지 않았고, pH는 저장기간에 따라 높아지는 경향이었다. L값은 저장말기로 갈수록 높아졌고, b값은 표면이 내부보다 낮았다. 등심과 사태의 표면 및 내부에 공통적으로 myoglobin과 metmyoglobin이 음의 상관관계가 있고, 사태의 표면과 내부는 myoglobin과 L값이 양의 상관관계에 있으며, Myoglobin과 oxymyoglobin이 음의 상관관계가 있었다. 그러나 수분함량, 상대습도 및 pH는 색의 변화와 일률적인 상관관계는 없었다.

• 한국농촌건축학회논문집
• /
• 제22권3호
• /
• pp.33-40
• /
• 2020

Wood is one of the main materials of wooden building. Hanok also uses wood as its main component. Recently, Hanok continues to be built. Wood is affected by the climatic environment. The growth of decay bacteria is activated at more than 80% relative humidity. The microclimate environment and moisture content were measured for architectural cultural properties that have been maintained for a long time as a wooden building. The method analyzed the measured data by distinguishing between cloudy and sunny days. In the case of the old house, Anchae moisture content was higher than that of Sarangchae. This seems to be due to the narrow front yard or the planting of trees. The microclimate environment inside the house began to decrease in humidity from 8 am. According to the survey data, the relative humidity was less than 80% from 9 am when there was wind around 4-6 am. It appeared an hour earlier than in the absence of wind. As a result, the time interval for dehumidifying of wood was widened. Therefore, the wooden building is open to the front so there is airflow under the eaves during the daytime and wind in the morning appear to be alternatives in order to lower the moisture content.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.69-76
• /
• 2015

This paper presents the results of an investigation into the frequency-dependent electrical parameters for different types of soil as a function of moisture content. The frequency dependence of soil electrical parameters is very important in the design of grounding systems. In fact, the performance of grounding systems is greatly dependent upon various factors such as soil type, particle size, water content, temperature, frequency, and the like. The resistivity and relative permittivity for four different soils were measured and analyzed in the frequency range of 1kHz - 1MHz. Soil resistivity declined as moisture content and frequency increased. In particular, the frequency dependence of soil resistivity was significant as the moisture content was low. In contrast, the relative permittivity of soil dramatically declined at the frequency of 10kHz or below as the moisture content increased, showing the opposite pattern in terms of variation patterns, compared to resistivity.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.83-90
• /
• 2008

Permeability to vapor and water among other performances required for finishing materials is dealt with in this study. The relative moisture content of concrete coated/covered with a finishing material was experimentally investigated while changing the environmental conditions including temperature, relative humidity, and rainfall. An organic paint (water-based urethane), organic synthetic resin emulsion-type film coating (film coating E), and inorganic porcelain tiles were selected as the finishing materials. When compared from the aspect of vapor and water permeability, the vapor permeability and water permeability of water-based urethane were high and low, respectively; those of film coating E were high and high, respectively; and those of porcelain tiles were low and low, respectively. This means that the moisture state of concrete structures is governed not only by the environmental conditions but also by the performance of finishing materials. It is therefore of paramount importance to appropriately select a finishing material to address the specific deteriorative factors involved in the concrete structure to be finished.

• 한국가구학회지
• /
• 제20권6호
• /
• pp.599-604
• /
• 2009

For the search of unified law of moisture movement in wood, moisture distribution of Korean red pine at non-steady state was investigated. We assume that the equilibrium moisture content (EMC) in wood depends on only temperature and relative humidity, it can be control in temperature and humidity chamber. If temperature is constant and humidity or vapor pressure is changed with sin curve shape at adequate cycles, EMC in chamber can be changed as well with sin-curve shape. The setup condition of a non-steady state in humidity control chambers is a constant temperature at $20^{\circ}C$ and 15+10 sin ${\omega}t$ percent EMC. It can be found that the distribution of moisture in the specimen with varying relative humidity are illustrated various types. Moisture in wood is complicated and vibrates with the moisture sorption process. Considering a unified law of moisture movement in wood, it is considered that the most important fact is to search the method of precise diffusion & transfer coefficients.