• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.268-272
• /
• 2010

The research presented here represents a collaborative effort with the SFWMD on developing scenarios for future climate for the SFWMD area. The project focuses on developing methodology for simulating precipitation representing both natural quasi-oscillatory modes of variability in these climate variables and also the secular trends projected by the IPCC scenarios that are publicly available. This study specifically provides the results for precipitation modeling. The starting point for the modeling was the work of Tebaldi et al that is considered one of the benchmarks for bias correction and model combination in this context. This model was extended in the framework of a Hierarchical Bayesian Model (HBM) to formally and simultaneously consider biases between the models and observations over the historical period and trends in the observations and models out to the end of the 21st century in line with the different ensemble model simulations from the IPCC scenarios. The low frequency variability is modeled using the previously developed Wavelet Autoregressive Model (WARM), with a correction to preserve the variance associated with the full series from the HBM projections. The assumption here is that there is no useful information in the IPCC models as to the change in the low frequency variability of the regional, seasonal precipitation. This assumption is based on a preliminary analysis of these models historical and future output. Thus, preserving the low frequency structure from the historical series into the future emerges as a pragmatic goal. We find that there are significant biases between the observations and the base case scenarios for precipitation. The biases vary across models, and are shrunk using posterior maximum likelihood to allow some models to depart from the central tendency while allowing others to cluster and reduce biases by averaging. The projected changes in the future precipitation are small compared to the bias between model base run and observations and also relative to the inter-annual and decadal variability in the precipitation.

• Computers and Concrete
• /
• v.24 no.4
• /
• pp.379-397
• /
• 2019

Steel-concrete composite beams are widely employed in constructions and their performance at the serviceability stage is of concern among practitioners and design regulations. In this context, an accurate evaluation of long-term deflections via various rheological concrete models is needed. In this work, the performance and predict capability of some concrete creep and shrinkage models ACI, CEB, B3, FIB and GL2000 are ascertained, and compared by using statistical bias indicators. Ten steel-concrete composite beams with existing experimental and numerical results are then modeled for this purpose. The proposed modeling technique uses the finite element method, where the concrete slab and steel beam are modeled with shell finite elements. Concrete is considered as an aging viscoelastic material and cracking is treated with the common smeared approach. The results show that when the experimental ultimate shrinkage strain is used for calibration, all studied rheological models predict nearly similar deflections, which agree with the experimental data. In contrast, significance differences are encountered for some models, when none calibration is made prior to. A value between twenty and thirty times the cracking strain is recommended for the ultimate tensile strain in the tension stiffening model. Also, increasing the relative humidity and decreasing the ambient temperature can lead to a substantial reduction of slab cracking for beams under negative flexure. Finally, there is not a unique rheological model that clearly excels in all scenarios.

• Journal of Environmental Health Sciences
• /
• v.45 no.2
• /
• pp.173-185
• /
• 2019

Objectives: The objectives of this study are to evaluate the accuracy and precision of exposure model ECETOC TRA v.3.1 by comparing model predictions with repeated exposure measurements in Korean workplaces and to investigate the applicability of ECETOC TRA to Korean workplace exposure assessment in K-REACH. Methods: Measured values and work conditions for 14 kinds of chemicals collected from exposure field surveys conducted at 10 companies in Korea were utilized for this study. All possible process categories (PROCs) considered to be relevant to each work process classification were selected and applied to ECETOC TRA as major determining parameters. In order to quantify the accuracy of the model, the lack of agreement (bias, relative bias, precision) was calculated and the risk ratios for each exposure situation between estimated and measured were also compared. Results: The estimated values varied between five and 25 times according to the PROCs for all exposure situations (ESs) based on tasks/chemicals. The results showed that most of the estimated values were below the measured values, and just 13 of 53 tasks were above the measured values. The overall bias and precision were $-2.91{\pm}1.62$ with ECETOC TRA, and we found that ECETOC TRA showed a low level of conservatism when applied to Korean workplaces, similar to previous studies. Conclusions: This study demonstrates that the existed PROC codes have limitations in fully covering various ESs in Korea. In order to improve the applicability of ECETOC TRA in K-REACH, the addition of new PROCs for Korean industries are necessary.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.348-353
• /
• 1997

Hydrogenated amorphous carbon(a-C:H) films were deposited on p-type Si(100) by DC saddle-field plasma enhanced CVD to investigate the effect of substrate bias on optical properties and structural changes. They were deposited using pure methane gas at a wide range of substrate bias at room temperature and 90 mtorr. The substrate bias voltage ($V_s$) was employed from $V_s=0 V$ to $V_s=400 V$. The information of optical properties was investigated by photoluminescence and transmitance. Chemical bondings of a-C:H have been explored from FT-IR and Raman spectroscopy. The thickness and relative hydrogen content of the films were measured by Rutherford backscattering spectroscopy (RBS) and elastic recoil detection (ERD) technigue. The growth rate of a-C:H film was decreased with the increase of $V_s$, but the hydrogen content of the film was increased with the increase of $V_s$. The a-C:H films deposited at the lowest $V_s$ contain the smallest amount of hydrogen with most of C-H bonds in the of $CH_2$ configuration, whereas the films produced at higher $V_s$ reveal dominant the $CH_3$ bonding structure. The emission of white photoluminescence from the films were observed even with naked eyes at room temperature and the PL intensity of the film has the maximum value at $V_s$=200 V. With $V_s$ lower than 200 V, the PL intensity of the film increased with V, but for V, higher than 200 V, the PL intensity decreased with the increase of $V_s$. The peak energy of the PL spectra slightly shifted to the higher energy with the increase of $V_s$. The optical bandgap of the film, determined by optical transmittance, was increased from 1.5 eV at $V_s$=0V to 2.3 eV at $V_s$=400 V. But there were no obvious relations between the PL peak and the optical gap which were measured by Tauc process.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.589-594
• /
• 2013

Background: Prospective cohort studies to determine cofactors with oncogenic HPV-infections for cervical cancer are very rare from developing countries and such data are limited to the few screening trials. Large screening trials provide such data as a by product. Some of the cases are prevented by screening and do not surface as invasive cancers at all. Also, pre-invasive lesions are detected almost entirely by screening. Screening causes selection bias if attendance in or effectiveness of screening is correlated with the risk factors. The aim of this study was to quantify the influence of screening on risk factors for cervical cancer. Materials and Methods: Our material stems from a rural cohort of 80,000 women subjected to a randomised screening trial. The effect of screening on the incidence of cervix cancer was estimated with reference to socio-demographic and reproductive risk factors of cervical cancer. We compared these risks with the incidence of cancer in the randomised control population by the same determinants of risk. Results: The results in the screening arm compared to the control arm showed that the women of low SES and young age were benefitting more than those of high SES and old age. The relative risk by age (30-39 vs 50-59) was 0.33 in the control arm and 0.24 in the screening arm. The relative risk by education (not educated vs educated) was 2.8 in the control arm and 1.8 in the screening arm. The previously married women did not benefit (incidence 113 and 115 per 100,000 women years in control vs screening arms) whereas the effect was substantial in those married (86 vs 54). Conclusions: The results in controls were consistent with the general evidence, but results in attenders and nonattenders of the screening arm showed that screening itself and self-selection in attendance and effectiveness can influence the effect estimates of risk factors. The effect of cervical cancer screening programmes on the estimates of incidence of cervical cancer causes bias in the studies on etiology and, therefore, they should be interpreted with caution.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.854-861
• /
• 2008

We have described a high power hybrid envelope elimination and restoration(H-EER) transmitter for IEEE 802.16e Mobile World Interoperability for Microwave Access(WiMAX) using an efficiency optimized power amplifier(PA). The PA has been designed to have maximum PAE at the important power generation $V_{ds}$, region using Nitronex 100-W PEP GaN HEMT. For the high power application, H-EER transmitter should be considered the regenerative oscillation problem due to the PA's bias fluctuation effect and bias modulator stability issue. Therefore, the bias modulator for H-EER transmitter has been designed to suppress the regenerative oscillation. For the interlock experiment, the bias modulator has been built with the efficiency of 72% and peak output voltage of 30 V for the envelope signal with a PAPR of 8.5 dB. The H-EER transmitter for WiMAX application has been achieved a high PAE characteristic, 38.8 % at an output power of 41.25 dBm. By using digital predistortion(DPD) technique, the Relative Constellation Error (RCE) has been satisfied the specification of -34.5 dB. This is the first work at 2.655 GHz high power H-EER transmitter for WiMAX application.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.105-109
• /
• 2005

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is $4.5{\times}3.2{\times}0.8 mm^3$ and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPF's and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR In the mean while, two types of bias circuits -lumped and distributed - are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPF's and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.91-98
• /
• 1999

The effect of the relative abundances of planktonic foraminifera juveniles on the climatic and oceanographic history interpretations is documented for the first time (as far as we know) by use of the year-long time-series sediment trap samples. Statistical correlation analysis suggests that many climatic and oceanographic variables such as sinking flux (total number) of planktonic foraminifera, relative abundance of some climatic indicator species G. bulloides and N. dutertrei, temperature, and salinity do not show any significant correlations with the relative abundance of planktonic foraminifera juveniles. However, planktonic foraminifera juveniles show moderate correlations with species diversity indices (species richness, Shannon-Wiener index, and Equitability). These indicate that the juveniles do not affect the relative abundances(%) of species compositions but affect the species diversity indices. Based on this one-year trap result, special care is required when we use species diversity indices for the interpretations of paleoceanography when the juveniles are excluded from total planktonic foraminiferal countings.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.5
• /
• pp.41-53
• /
• 2002

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation suggested by the first report of this project. According to the regions and consecutive durations, optimal design rainfalls were derived by the regional frequency analysis for L-moment in the second report of this project. Using the LH-moment ratios and Kolmogorov-Smirnov test, the optimal regional probability distribution was identified to be the Generalized extreme value (GEV) distribution among applied distributions. regional and at-site parameters of the GEV distribution were estimated by the linear combination of the higher probability weighted moments, LH-moment. Design rainfall using LH-moments following the consecutive duration were derived by the regional and at-site analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design rainfall were computed and compared in the regional and at-site frequency analysis. Consequently, it was shown that the regional analysis can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than at-site analysis in the prediction of design rainfall. Relative efficiency (RE) for an optimal order of L-moments was also computed by the methods of L, L1, L2, L3 and L4-moments for GEV distribution. It was found that the method of L-moments is more effective than the others for getting optimal design rainfall according to the regions and consecutive durations in the regional frequency analysis. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• Journal of the Korean Vacuum Society
• /
• v.13 no.4
• /
• pp.157-163
• /
• 2004

Dependence of residual compressive stress of diamond-like carbon (DLC) films on relative humidity was investigated. Polymeric, graphitic and diamond-like carbon films were prepared by r.f.-PACVD using methane or benzene with the negative self bias voltage of the substrate ranging from -100 to -800 V. In-situ measurements of the residual stress were carried out in an environment chamber where the relative humidity was varied from 10％ to 90％. In dense DLC film of high residual compressive stress and hardness, we could not observe any change in the residual compressive stress with relative humidity. However, in the cases of graphitic and polymeric DLC films, abrupt change in the residual stress occurred by changing the relative humidity. The quantity of the stress change was inversely proportional to the film thickness, which means that the stress change with humidity is not due to the penetration of the water molecule into the film structure, but due to surface interaction between water molecules and film surface.