• Title/Summary/Keyword: regular value

Search Result 599, Processing Time 0.025 seconds

Evaluation of Local Velocity Gradient and Total Mass transfer Time at Various Rotating Velocity by Using Computational Fluid Dynamics (CFD를 이용한 패들교반속도에 따른 속도경사 및 총물질전달시간 산정)

  • Jun, Hang-Bae;Tian, Dong-Jie;Hong, Ki-Won;Han, Hong-Sig;Park, Byeong-Chang
    • Journal of Korean Society on Water Environment
    • /
    • v.30 no.2
    • /
    • pp.166-174
    • /
    • 2014
  • Velocity gradient, G, a measure of the average velocity gradient in the fluid has been applied for complete mixing of chemicals in mechanical mixing devices. G values were calculated by the power input transferred to fluid in turbulent and transient range. Chemical reactions occur so fast that total mass transfer time required for even distribution of the chemicals determine the overall reaction time. The total mass transfer time is composed of the time for complete mixing through the reactor and for diffusion of the chemicals into the eddy. Complete mixing time was calculated by CFD (computer fluid dynamics) and evaluated by tracer tests in 2 liter jars at different rotating speeds. Turbulent range, Reynolds number above 10,000 in regular 2 liter jars occurred at revolution speed above 100 rpm (revolution per minute), while laminar range occurred at revolution speed below 10 rpm. A typical range of rotating speed used in jar tests for water and wastewater treatment was between 10 and 300 rpm, which covered both transient and turbulent range. G values supplied from a commercial jar test apparatus showed big difference from those calculated with power number specially in turbulent range. Diffusion time through eddy decreased 1.5 power-law of rotating speed. Complete mixing time determined by pumping number decreased increases in rotating speed. Total mass transfer time, finally, decreases as rotating speed increases, and it becomes 1 sec at rotating speed of 1,000 rpm. Complete mixing times evaluated from tracer tests showed higher than those calculated by power number at higher rotating speed. Complete mixing times, however, calculated by CFD showed similar to those of experimentally evaluated ones.

Quality Characteristics of Baguette using Fermented Rice Bran Sourdough (발효미강 Sourdough를 이용한 바게트 빵의 품질특성)

  • Hwang, Gum-Hee;Yun, Hai-Ra;Jung, Hee-Nam;Choi, Ok-Ja
    • Korean journal of food and cookery science
    • /
    • v.30 no.3
    • /
    • pp.307-316
    • /
    • 2014
  • This study was carried out in order to investigate the quality characteristics of baguette with different amounts of yeast and fermented rice bran sourdough(Control: Yeast 30 g + Fermented rice bran sourdough 0 g, A sample: Yeast 20 g + Fermented rice bran sourdough 150 g, B sample: Yeast 10 g + Fermented rice bran sourdough 300 g, C sample: Yeast 0 g + Fermented rice bran sourdough 450 g). The pH of fermented rice bran sourdough by fermentation time was decreased as the fermentation time was longer. The pH of baguette dough was decreased as the fermented rice bran sourdough increased; the volume was the highest in control at the 1st fermentation, and in the B sample at the 2nd fermentation. The weight of baguette was the highest in the C sample, and the volume and specific volume were the highest in the B sample. The microstructure of the cross section analysis indicated that the air cell of baguette crumb was large and regular in the B sample. The moisture content and water binding capacity were the highest in the B sample, although significantly different. The L value was decreased as there was an increasing addition ratio of fermented rice bran sourdough; further, the a and b values were decreased with an increase in baguette volume. Hardness, gumminess and chewiness were decreased as volume and specific volume were increased; yet, springiness was increased. According to the result of the sensory evaluation, the flavor, taste, appearance and texture were the highest in the B sample.

Quality and Sensory Characteristics of Reduced-fat Chicken Patties with Pork Back Fat Replaced by Dietary Fiber from Wheat Sprout

  • Choi, Yun-Sang;Sung, Jung-Min;Park, Jong-Dae;Hwang, Ko-Eun;Lee, Cheol-Won;Kim, Tae-Kyung;Jeon, Ki-Hong;Kim, Cheon-Jei;Kim, Young-Boong
    • Food Science of Animal Resources
    • /
    • v.36 no.6
    • /
    • pp.799-806
    • /
    • 2016
  • The effects of reducing pork fat levels from 20% to 15% or 10% by partially substituting pork back fat with wheat sprout fiber in reduced-fat chicken patties were investigated. Approximate composition, energy value, pH, color, cooking loss, reduction in diameter, reduction in thickness, shear force, and sensory properties were determined. Moisture content, ash contents, yellowness of uncooked and cooked reduced-fat chicken patties with wheat sprout were higher than those in the control, while displaying fat content, calorie content, and pH of uncooked and cooked lower in reduced-fat chicken patties than in the control. Cooking loss, reduction in diameter, and reduction in thickness were the highest in the reduced-fat chicken patties with 10% fat level. Cooking loss, reduction in diameter, and reduction in thickness were decreased when fat levels and wheat sprout levels were increased. Control samples without wheat sprout dietary fiber had significantly (p<0.05) higher color and flavor scores compared to reduced-fat chicken patties containing wheat sprout dietary fiber. The overall acceptability of the control and treatment with 15% fat and 2% wheat sprout dietary fiber (T3) was the highest. Therefore, 15% fat level in reduced-fat chicken patties with the addition of 2% wheat sprout dietary fiber can be used to improve the quality and sensory characteristics of regular-fat chicken patties containing 20% fat level.

APPLICATION OF DUAL PARAMETER ANALYSIS IN FLOW CYTOMETRIC DNA MEASUREMENTS OF ORAL SQUAMOUS CELL CARCINOMA (구강편평세포암종의 유세포분석적 DNA측정을 위한 이중 매개변수법의 적용)

  • Kim, Su-Ya;Ju, Hoon;Kim, Jae-Gon;Cho, Nam-Pyo;Baik, Byeong-Ju
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.23 no.2
    • /
    • pp.503-524
    • /
    • 1996
  • A series of 31 patients with primary oral squamous cell carcinoma (SCC) who were treated at Chonbuk National University Hospital during the years 1991-1995, were evaluated by dual parameter analysis in flow cytometric DNA measurement, Bryne's malignancy grading system, and the TNM classification. The aims of the present study were to discover that previously undetected aneuploid clones could be detected by dual parameter analysis and to determine the prognostic value of the above parameters. 1. Using dual parameter analysis of cytokeratin and DNA on disintegrated paraffin-embedded samples, aneuploid clones which were undetected by regular single parameter DNA analysis could be found among the cytokeratin-selected cells. DNA aneuploidy from paraffin-embedded samples were 15 cases compared with 10 cases using conventional DNA analysis. 2. The portion of aneuploid tumors showed slightly higher clinical stage and tumor size than the portion of diploid tumors, but the difference was not significant. The portion of DNA aneuploid tumors showed significantly higher mean mitosis and total malignancy scores than the portion of DNA diploid tumors. 3. The majority of the patients presented with clinical stage III and IV lesions showed significantly higher mean total malignancy score as compared to those with clinical stage I and II. 4. Histopathologic mean total malignancy score of the 31 cases was 12.7. Among the histologic parameters, mean mitosis score was correlated to the status of DNA ploidy and total malignancy score were correlated to the DNA ploidy and clinical staging.

  • PDF

Sports Biomechanical Analysis before and after Applying Weight Belt during Squat Exercise (스쿼트 동작 시 웨이트 벨트 착용 전·후에 따른 운동역학적 분석)

  • LEE, Jeong-Ki;HEO, Bo-Seob;KIM, Yong-Jae;LEE, Hyo-Taek
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.28 no.4
    • /
    • pp.893-902
    • /
    • 2016
  • The purpose of this study is to investigate the effect of wearing a weightlifting belt, which is an auxiliary equipment used during squat, by measuring and analyzing biomechanical difference in lower limb and proposing safer and to suggest a more effective exercise method for general population. Selected 8 male participants in their 20s who have not performed regular resistance exercise for at least a year, but have experience of performing squat. The comprehensive method of study is as follows: subjects were notified of the purpose of the study and were told to practice warm-up and the squat motion for the experiment for 20 minutes. When the participant believed they were ready to begin, the experiment was started. At controlled points, foot pressure distribution sensor has been installed. Then left and right feet have been placed on the pressure distribution sensor, from which data for successful squat position that does not satisfy the criteria for failure have been collected and computed with Kwon3D XP program and TPScan program. For data processing of this study, SPSS 21.0 was used to calculated mean (M) and standard deviation (SD) of the analyzed values, and paired t-test has been conducted to investigate the difference before and after wearing the weightlifting belt, with p-value of ${\alpha}<.05$. As for time consumed depending on usage of weightlifting belt in squat, statistically significant difference has been found in P2, which is recovery movement. Lower limb angle depending on usage of weightlifting belt in squat has shown statistically significant difference in E1 foot joint(p<. 001). There has been statistically significant difference in E2 knee joint. Foot pressure percentage depending on usage of weightlifting belt in squat were found to be statistically significant (p<. 01) in both regions of anterior and posterior foot.

Wavelet Compression Experiments of the Remotely Sensed Images for Three Kinds of Wavelet Families

  • Jin, Hong-Sung;Han, Dong-Yeob
    • Spatial Information Research
    • /
    • v.17 no.4
    • /
    • pp.455-462
    • /
    • 2009
  • A method to find the nearly optimal PSNR values for compression was tried to remotely sensed images. There is no rule to find the best wavelet pairs for image processing. The expected wavelet pairs following the suggested algorithm showed the optimal result for various kinds of images. Firstly, the PSNR variations with three wavelet families were analyzed. In many cases the longer wavelet filter shows the higher PSNR value, but the rate is getting less in orthogonal wavelet families. Wavelets with moderate filter length are suggested at the point of computational cost. For biorthogonal families it was hard to predict from the length of filters. Multiresolution wavelet analysis was used up to level 3 with three kinds of wavelet families. Biorthogonal wavelet family showed irregular pattern to get the maximum PSNR values, while orthogonal wavelet families showed regular pattern. In orthogonal wavelet families the nearly optimal wavelet pair can be predicted from the level 1.

  • PDF

Low-Latency Handover Scheme Using Exponential Smoothing Method in WiBro Networks (와이브로 망에서 지수평활법을 이용한 핸드오버 지연 단축 기법)

  • Pyo, Se-Hwan;Choi, Yong-Hoon
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.3
    • /
    • pp.91-99
    • /
    • 2009
  • Development of high-speed Internet services and the increased supply of mobile devices have become the key factor for the acceleration of ubiquitous technology. WiBro system, formed with lP backbone network, is a MBWA technology which provides high-speed multimedia service in a possibly broader coverage than Wireless LAN can offer. Wireless telecommunication environment needs not only mobility support in Layer 2 but also mobility management protocol in Layer 3 and has to minimize handover latency to provide seamless mobile services. In this paper, we propose a fast cross-layer handover scheme based on signal strength prediction in WiBro environment. The signal strength is measured at regular intervals and future value of the strength is predicted by Exponential Smoothing Method. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency is reduced. Simulation results demonstrate that the proposed scheme predicts that future signal level accurately and reduces the total handover latency.

  • PDF

Preference and Satisfaction Regarding the Type of Fashion Retailer's Sales Promotion Based on Consumer's Empirical Characteristics (소비자의 경험적 특성에 따른 패션기업의 판매촉진 유형별 선호 및 만족)

  • Hwang, Jeong-In;Lee, Ji-Yeon;Park, Jae-Ok
    • The Research Journal of the Costume Culture
    • /
    • v.20 no.2
    • /
    • pp.169-183
    • /
    • 2012
  • This study was aimed at finding out the preferences and satisfaction levels regarding the type of fashion retailer's sales promotion based on consumers' empirical characteristics. A total of 223 questionnaires were used for the survey of this study. The methods of this study were descriptive analysis, factor analysis, reliability tests, one-way ANOVA, $t$-tests and ${\chi}^2$-test. The consumer groups were divided by habitual experience and self-evaluated knowledge relate to apparel product. The results of this study showed that consumers have different preferences and post-utilization satisfaction regarding the type of sales promotion offered by fashion retailers. Consumers with more experiences in apparel product and with higher self-evaluated knowledge were more active in utilizing the benefits offered through the value-added type of sales promotions, such as the gift certificate or coupon. Consumers with more experience in apparel product also showed higher satisfaction with both the utilitarian and hedonic types of sales promotions, such as gift certificate offer, special price, price discount event, and coupon or courtesy card offer. Furthermore, consumers with higher self-evaluated knowledge showed higher satisfaction with the utilitarian types of sales promotion, such as gift certificate offer and regular sale. Therefore, by identifying the accurate understanding of consumers'empirical characteristics, an enterprise might be able to satisfy consumer by offering more appropriate and subdivided types of sales promotion.

Kinetics Studies on Nucleophilic Reactions of Methanesulfonyl Chloride with Substituted Aniline in Methanol (메탄올 속에서 치환아닐린과 염화메탄술포닐의 친핵성반응의 속도론적 연구)

  • Lee Suk-Kee
    • Journal of the Korean Chemical Society
    • /
    • v.19 no.3
    • /
    • pp.156-162
    • /
    • 1975
  • Rates of reactions of methanesulfonyl chloride with various substituted anilines have been measured in methanol. Substituent effects in aniline are found to be linearly correlated with pKa(Bronsted relation with ${\beta}$ = 0.84) and ${\rho}$(Hammett equation with ${\rho}$ = -2.46) respectively. The results are interpreted in terms of degree of bond-formation at the transition state, which was found to have progressed relatively further. The rates for o-methylaniline deviated from the Bronsted plot established by meta and para substituted anilines because of a steric effect of ortho position in aniline. Activation parameters, ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ have also been determined. The enthalpy of activation showed a regular variation in that electron donating substituents in the p-substituted aniline decrease ${\Delta}H^{\neq}$ and increase the negative value of ${\Delta}S^{\neq}$.

  • PDF

Abnormal Step Recognition for Pedestrian Danger Recognition (보행자의 위험인지를 위한 비정상 걸음인식)

  • Ryu, Chang-Keun
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.12 no.6
    • /
    • pp.1233-1242
    • /
    • 2017
  • Various attempts have been made to prevent crime risk. One of the cases where outdoor pedestrians are attacked by criminals is the abnormal health condition. When a mental or mental condition that can not sustain normal walking due to drunkenness is exposed, the case of being a crime is revealed through crime case analysis. In this study, we propose a method for estimating the state of an individual that can be detected in outdoor activities. In order to avoid the inconvenience of installing a separate terminal for event information transmission of sensors and sensors, it is possible to estimate an abnormal state by using a 3-axis acceleration sensor built in a smart phone. The state of the user can be estimated by analyzing the momentum of the user and analyzing it with the passage of time. It is possible to distinguish the flow of time at regular intervals, to recognize the activity patterns in each time band, and to distinguish between normal and abnormal. In this study, we have evaluated the total amount of kinetic energy and kinetic energy in each direction of the acceleration sensor and the Fourier transformed value of the total energy amount to distinguish the abnormal state.