• Journal of Astronomy and Space Sciences
• /
• v.5 no.1
• /
• pp.53-56
• /
• 1988

UBV photometric monitoring of Eps Aurigae has been made at Yonsei University Observatory since the 1982-1984 eclipse. Among observatios made in four seasons(1984-5, 1985-6, 1986-7, 1987-8) after the 1982-84 eclips ended the observations of the latest season are presented. Standardized UBV light curves of Eps Aur exhibit a light variation in a semi-regular fashion with the amplitudes of 0.12, 0.19, and 0.29 for V, B, and U, respectively. Duratiohs of this light variation may show a color dependency with the mean value of about 78 days whose minimum light on near JD2447118.

• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.407-420
• /
• 2016

The aim of this study is to investigate the effect of vertical ground motion (VGM) on seismic behavior of reinforced concrete (RC) regular frame with construction joints, and determine more proper modeling method for cast-in-situ RC frame. The four-story RC frames in the regions of 7, 8 and 9 earthquake intensity were analyzed with nonlinear dynamic time-history method. Two different methods of ground motion input, horizontal ground motion (HGM) input only, VGM and HGM input simultaneously were performed. Seismic responses in terms of the maximum vertex displacement, the maximum inter-story drift distribution and the plastic hinge distribution were analyzed. The results show that VGM might increase or decrease the horizontal maximum vertex displacement depending on the value of axial load ratio of column. And it will increase the maximum inter-story drift and change its distribution. Finally, proper modeling method is proposed according to the distribution of plastic hinges, which is in well agreement with the actual earthquake damage.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.1
• /
• pp.20-28
• /
• 1994

A numerical study has been performed on enhancement of heat transfer in a forced convection of the modified driven-cavity flow which was previously found by the author to give a regular or chaotic stirring depending on the parameter value. It is found that for the present case wherein heat is transmitted between fluid and the surrounding walls, the chaotic stirring enhances the heat transfer at high Peclet numbers. The optimal condition of the flow modulation for the best heat transfer can be predicted by purely investigating the hydrodynamic facet, i.e. the stirring effect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.812-817
• /
• 2009

In this paper, a new method to design sliding surfaces using eigenstructure assignment is proposed. Most conventional methods for constructing the surfaces require special form like canonical or regular canonical form of system matrices. But the proposed method can be applied to arbitrary system matrices. Futhermore, the surface matrix, C can be decided for the matrix multiplication, CB to have a designated form. SVD is used to decide desirable eigenvectors explicitly. To verify the proposed algorithm, a sliding mode controller for a multivariable system with matched uncertainty is constructed. The controller is designed to guarantee minimum approach velocity to the sliding surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.333-338
• /
• 2000

The purpose of this study is to evaluate the compressive strength properties of municipal waste ash hardening using the unrefined fly-ash and paper sludge ash and to offer basic data to someone for recycling municipal waste ash. Unrefined fly-ash and paper sludge ash are used with admixture. MWA are tested that grading, specific gravity and pH value and observed microsructure of particle with SEM. The compressive strengths of MWA hardening which is mixed with regular ratio according to each admixture are measured. In the results of test, fly-ash is very effective for reducing content of cement by 50% in the recycling of MWA. But proper content mixed paper sludge ash is recommend by about 20% in binder.

• The Mathematical Education
• /
• v.52 no.3
• /
• pp.423-442
• /
• 2013

The purpose of the study was to examine the effects of the reciprocal peer tutoring in high school students' affective characteristics with respect to mathematics. The study was conducted with 111 first graders in one high school located in Gyeonggi-do, and the study lasted for 1 year in regular mathematics classrooms. According to the results, reciprocal peer tutoring was very effective in improving students' interest and self-efficacy toward mathematics and reducing mathematics anxiety. Especially, in high and low performing student groups, there were statistically significant improvements in affective factors such as interest, self-efficacy toward mathematics, and mathematics anxiety after reciprocal peer tutoring. However, average performing student group showed statistically significant improvements in affective factors of interest and self-efficacy toward mathematics.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1117-1120
• /
• 1999

The main purpose of padding methods is to extend the boundary segments of arbitrarily shaped objects to a regular grid so that the common block based coding technique, such as 8${\times}$8 DCT, can be applied. In the conventional padding methods used in MPEG-4: LPE and zero padding, the main process is based on 8${\times}$8 blocks. On the contrary, we propose a new padding method based on pixel-by-pixel. The proposed method puts pixels into a multi-busier using the typical value of each boundary blocks and reproduces new boundary blocks. Simulation results show that the proposed method reduces the conventional padding method and improves the coding efficiency of the conventional padding method.

• Journal of Korean Society for Quality Management
• /
• v.39 no.4
• /
• pp.480-485
• /
• 2011

This paper presents a spare ordering policy for preventive replacement with minimal repair. To analyze the ordering policy, the failure process is modeled by a non-homogeneous Poisson process. Introducing the ordering, repair, downtime, replacement costs and salvage value, we derive the expected cost effectiveness as a criterion of optimality when the lifetime and lead times for the regular and expedited orders are generally distributed random variables. It is shown that, under certain conditions, there exists a finite and unique optimum ordering time which maximizes the expected cost effectiveness. A numerical example is also included to explain the proposed model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.58-66
• /
• 2008

In this paper, we have proposed a method and procedure which can find out the unknown network protocol. Although it seems to be difficult to identify the protocol, we can find out the rule in the packet according to the method we have proposed. We have to recognize functions of the system and make the list of events first. Then we capture the network packet whenever the event are occurred. The captured packets are examined by means of the method that is finding repeated parts, changed parts according to the input value, fixed parts and changed parts according to regular rules. Finally we make the test program to verify the protocol. We applied this method and procedure to upgrade Electronic Warfare Test System which is operated by ADD. We have briefly described the redesign of control and analysis software for Electronic Warfare Test System

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.76-79
• /
• 2009

This paper investigates the performance of a vehicular rear-view camera through quantifying the image quality based on several objective criteria from the ISO (International Organization for Standardization). In addition, various experimental environments are defined considering the conditions under which a rear-view camera may need to operate. The process for evaluating the performance of a rear-view camera is composed of five objective criteria: noise test, resolution test, OECF (opto-electronic conversion function) test, color characterization test, and pincushion and barrel distortion tests. The proposed image quality quantification method then expresses the results of each test as a single value, allowing easy evaluation. In experiments, the performance evaluation results are analyzed and compared with those for a regular digital camera.