• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1592-1597
• /
• 2001

Sixteen pigs from 2 distinct genetic lines (LGAH and VFIL) obtained after eight generations of divergent selection for high (H) and low (L) lean tissue growth rate with ad-libitum feeding (LGA) and voluntary feed intake (VF1), respectively, were used in this study. The objectives of this investigation were to establish appropriate working conditions for the postheparin plasma lipoprotein lipase (LPL) assay and to study relationships between fat deposition and plasma lipids, very low density lipoprotein (VLDL) lipids, VLDL-subfractions and postheparin plasma LPL activity in growing pigs. Four preliminary experiments were performed to determine the appropriate working conditions for the postheparin plasma LPL assays. Postheparin plasma preincubated with SDS (20-50 mM) at $26^{\circ}C$ for 45 minutes inhibited hepatic lipase activity. A total of $2{\mu}l$ VLDL/assay produced maximum stimulation of LPL activity. Postheparin plasma protein and increasing incubation time contributed an optimum response. LGAH pigs had a significantly higher proportion subtraction 2 than VFIL pigs. No differences were observed in postheparin plasma LPL activity and backfat thickness for two lines of pigs. There were positive correlations between backfat thickness and proportion of subtractions 2 and postheparin plasma LPL activity but the results were not statistically significant. Backfat thickness was not statistically correlated with proportion of subtraction 2 and postheparin plasma LPL activity in a multiple regression analysis. It is believed that the apolipoprotein E, which is present in higher quantities in VLDL-subfraction 2 plays an important role for clearing VLDL triacylglycerol into adipose tissue. LPL activity of pigs can be measured by using postheparin plasma technique. If the relationships of backfat thickness and VLDL-subfraction 2 and postheparin plasma LPL activity can be established, it suggests that these parameters could be used as indicators in selection programmes. Further experiments need to be conducted by using larger sample size and different breed of pigs with greater differences in backfat thicknesses to confirm these trends.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.744-754
• /
• 2013

Quantitative structure-activity relationship (QSAR) analysis for recently synthesized imidazole-(benz)azole and imidazole - piperazine derivatives was studied for their anticancer activities against breast (MCF-7) cell lines. The statistically significant 2D-QSAR models ($r^2=0.8901$; $q^2=0.8130$; F test = 36.4635; $r^2$ se = 0.1696; $q^2$ se = 0.12212; pred_$r^2=0.4229$; pred_$r^2$ se = 0.4606 and $r^2=0.8763$; $q^2=0.7617$; F test = 31.8737; $r^2$ se = 0.1951; $q^2$ se = 0.2708; pred_$r^2=0.4386$; pred_$r^2$ se = 0.3950) were developed using molecular design suite (VLifeMDS 4.2). The study was performed with 18 compounds (data set) using random selection and manual selection methods used for the division of the data set into training and test set. Multiple linear regression (MLR) methodology with stepwise (SW) forward-backward variable selection method was used for building the QSAR models. The results of the 2D-QSAR models were further compared with 3D-QSAR models generated by kNN-MFA, (k-Nearest Neighbor Molecular Field Analysis) investigating the substitutional requirements for the favorable anticancer activity. The results derived may be useful in further designing novel imidazole-(benz)azole and imidazole-piperazine derivatives against breast (MCF-7) cell lines prior to synthesis.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.190-197
• /
• 2001

Noise-induced hearing loss(NIHL) was the highest rate (43.5%~58.5% from 1996 to 1998) of positive findings through specific medical program in Korea. There were much more NIHL at workers of automobile manufacturing factories than other manufacturing factories. The specific aim of the present study was to determine the noise exposure of automobile press lines, according to their job titles, press line types(auto, semiauto), dosimeter parameters setting. There were a total 11 press lines sampled at a automobile manufacturing company. Among those press lines, 10 press lines were autolines with acoustic enclosure, one semiauto press line was no aucostic enclosure Noise exposure data were sampled for an work shift using noise dosimeter, which recorded both time-weighted average(TWA) and 1-min average. The mean OSHA TWA(Korea TWA with threshold 90) was $80.7dB(A){\pm}4.7dB(A)$ for leader, $82.8dB(A{\pm}4.5dB(A)$ for pallette man, $76.7dB(A){\pm}4.3dB(A)$ for press operators, $76.6dB(A){\pm}5.6dB(A)$ for crane operators, $77.1dB(A){\pm}2.8dB(A)$ for forklift drivers, whereas the mean NIOSH TWA was $88.9dB(A){\pm}1.7dB(A)$ for leader, $89.6dB(A){\pm}2.1dB(A)$ for pallette man, $86.7dB(A){\pm}1.8dB(A)$ for press operators, $88.5dB(A){\pm}2.0dB(A)$ for crane operators, $87.7dB(A){\pm}1.0dB(A)$ for forklift drivers. While L10 for NIOSH TWA samples was 84.8 dB(A) ~ 87.3 dB(A), L10 for OSHA TWA samples was 69.5 dB(A) ~ 77.4 dB(A). L10 means that the TWA for 90% of the samples exceeded L10. Among OSHA TWA(Korea TWA with threshold 90) samples for pallette man, 7.7 % exceeded 90 dB(A), the OSHA permissible exposure level, but OSHA TWA samples for the other job titles didn't. Among NIOSH TWA samples, the samples over 85 dB(A), the NIOSH recommended exposure limit, was 100% (leaders), 83.3 %(operators), 97.4%(palletteman), 100%(forklift drivers), 91.7 %(crane operator). The results of One-way random effects analysis of variance models shows that the difference between job titles was significant by OSHA TWA(p<0.05), but not significant by NIOSH TWA(p>0.05). NIOSH TWA samples were significantly higher than OSHA TWA samples(P<0.05). Regression analysis was used to obtain relationships between OSHA TWA samples and NIOSH TWA samples. In this case the coefficient of determination = 0.90, which shows the high degree association between two methods. Regression equation, NIOSH TWA = 0.552 * OSHA TWA + 42.13 dB(A), shows that if OSHA TWA is known, NIOSH TWA can be predicted by the equation. The mean TWA difference between threshold 80 dBA and 90 dBA was significant(p<0.01). While the TWA noise exposures were 7.7% above the Korea(OSHA) PEL, they were more than 83.3% over NIOSH REL. Automobile workers were exposed to noise level that could be potentially damaging to their hearing. It found that there is approximately 25% excess risk of hearing loss even if a worker is protected to the PEL in according to NIOSH study.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.32-34
• /
• 1974

The important results which have been obtained in the investigation can be recapitulated as follows. 1. As demonstrated by the experimental results and analyses concerning their effects in the on-ground type mushroom house, the constructions in relation to the side wall and ceiling of the experimental house showed a sufficient heat insulation on effect to protect insides of the house from outside climatic conditions. 2. As the effect on the solar type experimental mushroom house which was constructed in a half basement has been shown by the experimental results and analyses, it has been proved to be effective for making use of solar heat. However there were found two problems to be improved for putting solar house to practical use in the farm mushroom growing: (1) the construction of the roof and ceiling should be the same as for the on ground type house, and (2) the solar heat generating system should be reconstructed properly. 3. Among several ventilation systems which have been studied in the experiments, the underground earthen pipe and ceiling ventilation, and vertical side wall and ceiling ventilation systems have been proved to be most effective for natural ventilation. 4. The experimental results have shown that ventilation systems such as the vertical side wall and underground ventilation systems are suitable to put to practical use as natural ventilation systems for farm mushroom house. These ventilation systems can remarkably improve the temperature of fresh air which is introduced into the house by heat transfers within the ventilation passages, so as to approach to the desired temperature of the house without any cooling or heating operation. For example, if it is assuming that X is the outside temperature and Y is the amount of temperature adjustment made by the influence of the ventilation system, the relationships that exist between X and Y can be expressed by the following regression lines. Underground iron pipe ventilation system. Y=0.9X-12.8 Underground earthen pipe ventilation system. Y=0.96X-15.11 Vertical side wall ventilation system. Y=0.94X-17.57 5. The experimental results have 8hown that the relationships existing between the admitted and expelled air and the $CO_2$ concentration can be described with experimental regression lines or an exponent equation as follows: 5.1 If it is assumed that X is an air speed cm/sec. and Y is an expelled air speed in cm/sec. in a natural ventilation system, since the Y is a function of the X, the relationships that exist between X and Y can be expressed by the regression lines shown below: 5.2 If it IS assumed that X is an admitted volume of air in $m^3$/hr. and Y is an expelled volume of air in $m^3$/hr. in a natural ventilation system, since the Y is a function of the X, the relationships that exist between X and Y can be expressed by the regression lines shown below. 5.3 If it is assumed that expelled air speed in emisec. and replacement air speed in cm/sec. at the bed surface in a natural ventilation system are shown as X and Y. respectively, since the Y is a function of the X. the relationships that exist between X and Y can be expressed by the following regression line: GE(100%)-CV (50%) ventilation system. Y=-0.54X+0.84 5.4 If it is assumed that the replacement air speed in cm/sec. at the bed surface is shown as X, and $CO_2$ concentration which is expressed by multiplying 1000 times the actual value of $CO_2$ % is shown as Y, in a natural ventilation system, since the Y is a function of the X, the relationships that exist between X and Y can be expressed by the following regression line: GE(100%)-CV(50%) ventilation system. Y=114.53-6.42X 5.5 If it is assumed that the expelled volume of air is shown as X and the $CO_2$ concencration which is expressed by multiplying 1000 times the actual of $CO_2$% is shown as Y in a natural ventilation system, since the Y is a function of the X, the relationships that exist between X and Y can be expressed by the following exponent equation: GE(100%)-CV(50%) ventilation system. Y=$127.18{\times}1.0093^{-x}$ 5.6 The experimental results have shown that the ratios of the cross sectional area of the GE and CV vent to the total cubic capacity of the house, required for providing an adequate amount of air in a natural ventilation system, can be estimated as follows: GE(admitting vent of the underground ventilation) 0.3-0.5% (controllable) CV(expelling vent of the ceiling ventilation) 0.8-1.0% (controllable) 6. Among several heating devices which were studied in the experiments, the hot-water boilor which wasmodified to be fitted both as hot-water boiler and as a pressureless steam-water was found most suitable for farm mushroom growing.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.203-226
• /
• 2007

The purpose of this research is to analyze the impact of business scope and technological innovation capability(TIC) on firm performance in SMEs. Among the 1,077 SME sample data collected with the help of Korean Industrial Complex Corporation, 228 sample data from capital goods sectors had been selected and analyzed. Several mutiple regression models were developed to test the main and the interaction effects of two independent variables business scope and TIC on SME performance. The empirical analysis show that the number of product lines, one of the two scope variable measured, is positively correlated with the return on sales(ROS). Among the variable of TIC, the number of intellectual property rights(IPRs) is positively correlated with the sales growth rates of SMEs, which the ratio of engineers to total employees is positively correlated with the ROS of SMEs. The results also delineated some interaction effects of business scope and TIC on SME performance. There exists a positive interaction effect of the ratio of engineers to total employees and the number of product lines both on ROS and scales growth rate. The interaction of the number of customers and the number of IPRs positively effects on ROS, and also the interaction of the number of product lines and the number of IPRs are positively related with ROS. Findings of this research indicates that it is necessary for SMEs in capital goods sectors to accumulate technological innovation capability and to expand business scope to improve firm performance. Furthermore, the accumulation of internal TIC should accommodate with the expansion of business scope to gain an improved performance. Particularly, adequate technological innovation capability is required to address the need of expanded customers when enlarging the scope of customers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.397-405
• /
• 2015

In the past, expressways focused on mobility. However, the paradigm of expressways fuction today has been changed from fast expressways to safe expressways as people's quality of living and consciousness level heightened. In 2012, 3,550 traffic accidents occurred on expressways and 371 people died. The fatality rate of traffic accidents on expressways is almost twice that on general national roads. This study developed accident forecast models (safety performance functions) based on the number of traffic accidents and traffic volumes on six major lines on expressways. It is difficult to forecast safety performance functions for each expressway line because the lines and the scales of expressways are different from each other; therefore, integrated safety performance functions of six lines were determined first, and the coefficients, which can correct the traffic accidents on each line, were calculated. It is believed that this study will contribute in the safer management of expressways by being used as basic information in the establishment of traffic safety strategies for each expressway line in prevention of traffic accidents. Moreover, more studies would be required in the future, which would suggest reliable accident forecasts by calculating correction coefficients by line through integrated models by groups dependent on the characteristics of each line.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.1
• /
• pp.17-27
• /
• 2011

A selection experiment for reduced residual feed intake (RFI) in Yorkshire pigs consisted of a line selected for lower RFI (LRFI) and a random control line (CTRL). Longitudinal measurements of daily feed intake (DFI) and body weight (BW) from generation 5 of this experiment were used. The objectives of this study were to evaluate the use of random regression (RR) and nonlinear mixed models to predict DFI and BW for individual pigs, accounting for the substantial missing information that characterizes these data, and to evaluate the effect of selection for RFI on BW and DFI curves. Forty RR models with different-order polynomials of age as fixed and random effects, and with homogeneous or heterogeneous residual variance by month of age, were fitted for both DFI and BW. Based on predicted residual sum of squares (PRESS) and residual diagnostics, the quadratic polynomial RR model was identified to be best, but with heterogeneous residual variance for DFI and homogeneous residual variance for BW. Compared to the simple quadratic and linear regression models for individual pigs, these RR models decreased PRESS by 1% and 2% for DFI and by 42% and 36% for BW on boars and gilts, respectively. Given the same number of random effects as the polynomial RR models, i.e., two for BW and one for DFI, the non-linear Gompertz model predicted better than the polynomial RR models but not as good as higher order polynomial RR models. After five generations of selection for reduced RFI, the LRFI line had a lower population curve for DFI and BW than the CTRL line, especially towards the end of the growth period.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.421-425
• /
• 2012

The objective of this study was to improve the detection limit of rapid detection kit for Salmonella Typhimurium by image analysis system. The rapid detection kit was comprised of four elements: sample pad, conjugate pad, nitrocellulose pad and absorbent pad. Gold nanoparticle and Salmonella antibody were used as a tag and a receptor. Salmonella antibody and goat rabbit IgG antibody were used as test and control lines on nitrocellulose membrane. The color intensity of test line began to increase from $10^5CFU/mL$ of Salmonella sample. A multiple linear regression analysis was employed to explain the relationship between predicted and measured number of Salmonella cells. The developed model could successfully predict the cell number of Salmonella with validation against extra-experimental result.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.142-151
• /
• 2011

In this study, we have observed PM-10 and $CO_2$ concentration in the subway cabins and analyzed the factors affecting air quality using a multivariate statistical analysis. The measurements have been conducted at Seoul metropolitan subway lines. The results show that the mean concentration of the PM-10 and $CO_2$ inside subway cabins is in the range of 62.6 to 108.0 ${\mu}g/m^3$ and 907 to 2,008 ppm, respectively. $CO_2$ level in specific sections during the rush hours has exceeded air quality guidelines for public transportation, which requires designated train ventilation controls. Correlation and regression analyses of influencing factors imply that $CO_2$ level is severely influenced by the number of passengers and PM-10 level is also correlated with the number of passengers. In particular, PM-10 level in the cabins indicates a positive correlation with outdoor PM-10 level. In addition, the PM concentration has been highly affected by the number of passengers and distance between stations.

• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.203-212
• /
• 2007

Means measuring carcass cut traits in live pigs is needed to genetically improve the production of favorite cuts in swine. The data of body measurements as well as carcass traits were collected from 432 heads of 4 crossbred lines. Weights of most parts and percentages of belly and boston in carcass were significantly influenced by days to slaughter. Most of off test body measurements show higher correlations with carcass cut traits than body measurements of on test and market do. The multiple regression equations for estimation of carcass cut traits by off test body measurements have higher accuracy than by body measurements of on test and market. The coefficients of determination in estimation of polynomial regression with off test body measurements after adjustments of carcass cut traits for days to market were ranged 0.59 to 0.68 and 0.33 to 0.43 in weights and percentages of carcass cuts, respectively. Develop- ment of an excellent Korean type seed stock for favorite cuts can be expected, if the estimation of carcass cut traits for live animals is implemented in swine genetic improvement program.