• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.17-22
• /
• 1998

Stator Transient inductance has much influence on rotor flux orientation. In this paper, a new simple on-line tuning scheme of inductances including stator transient inductance for rotor flux orientation control is proposed. Detuned effects caused by inductance variations are shown and simple on-line tuning scheme of them is proposed. Inductances are estimated and tuned by only stator flux and stator current. The proposed scheme is effective in wide speed region including the field weakening region. The proposed on-line tuning scheme is confirmed by the simulation and experiment results.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.185-193
• /
• 2003

Basic flow fields of two dimensional V flames were examined as a preliminary work to study the instability of premixed flame with vorticity generation. Laminar premixed propane and methane flame were anchored by electrically heated wire to make two dimensional V flames. Flow fields were measured mainly by PIV(Particle Image Velocimetray) and the results were compared with those obtained by LDV(Laser Doppler Velocimetry) to confirm their reliability. Because the curvatures of V flames are so small, V flames were locally assumed to be inclined planar flames in gravitational field. The measured flow fields were locally compared with those of analytical solutions, which showed the qualitatively similar results. In downstream region, the vorticity fields were nearly constant except region near the center line, which support the assumption of locally one dimensional flame. Besides it was tried to find experimentally the similarity of flow fields in downstream region. Finally, stability diagram of propane and methane flames were drawn for the equivalence ratio less than one and the wide range of mean velocity.

• Journal of Korea Foundry Society
• /
• v.22 no.6
• /
• pp.288-292
• /
• 2002

Ni-base amorphous alloys were manufactured using melt-spinning and Cu-mold die casting methods. Amorphous formability, the supercooled liquid region before crystallization and mechanical properties were examined. The reduced glass transition temperature and the supercooled liquid region of $Ni_{51} Nb_{20} Zr_9 Ti_9 Co_8 Cu_3$alloy were 0.621 and 46 K respectively. $Ni_{51} Nb_{20} Zr_9 Ti_9 Co_8 Cu_3$ alloy was produced in the rod shape 3mm diameter using the Cu-mold die casting. Hardness, compression strength, elongation and elastic modulus of the alloy were 850 DPN, 2.75 GPa, 1.8% and 150 GPa respectively. Moreover, compression strength of 2.75 GPa was the highest value in the amorphous bulk alloy produced up to now.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.2
• /
• pp.8-18
• /
• 2001

The direct simulation Monte Carlo Method is applied to investigate the two-dimensional flow fields of a turbomolecular pump(TMP) in both molecular and transition flow regions. The pumping characteristics of the TMP are investigated for a wide range of the Knudsen number. The maximum of compression ratio and of pumping speed strongly depend on the Knudsen number in transition region, while they weakly depend on the Knudsen number in free molecular flow region. The present numerical results show good agreement with the previously known experimental data. Finally. the results of the single blade row in both molecular and transition regions are used to predict the overall performance of a TMP, which has three kinds of blade with 24-rows.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1027-1033
• /
• 1990

In order to identify the origin of phase coexistence at morphotropic tetragonal and rhombohedral boundary in PZT ceramics, the effect of chemical inhomogeneity on phase coexistence region was investigated. Two kinds of PZT ceramics with different chemical homogeneity were prepared by conventional solid state reaction and co-precipitation method. There was coexistence of tetragonal and rhombohedral phase over a wide composition range in PZT ceramics calcined by solid state reaction, and there was also phase coexistence of which region was reduced considerably in sintered samples. And phase coexistence region was not observed in co-precipitated PZT ceramics(within 1 mole%). Therefore compositional fluctuation is considered to be major origin of the phase coexistence at morphotropic phae boundary in PZT ceramics.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.2
• /
• pp.196-204
• /
• 1994

Studied was impact assessment of sea dike construction in Saemankeum. To represent complexity of the geometry and topography of the region a flexible finite grid system are adopted. Combined fine and coarse meshes based on automatic mesh generator were applied in pre-processing. A nonlinear periodic finite element model. TEANL, was implied in this analysis, which gave good results compared to the observed data. It was predicted that the front region of dike connecting Shinsi-Karyeok-Daehang-Pyunsan will behave as a closed rectangular bay with wide width, which may affect significantly to the circulation and dispersion mechanism in the region.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.640-646
• /
• 2011

The current study presents the design and performance of a novel 4/2 switched reluctance motor (SRM) for a high-speed air blower. With a comparative study of some rotor structures for a high-speed drive, a stepper-type rotor is optimized to produce a continuous torque and a low torque ripple. Rotor pole arc is modified to have a wide continuous output torque region, and air gap is determined to develop less torque ripple. The rotor radius is determined to reduce torque ripple with a reiterative FEM analysis. The designed rotor has three regions: short uniform, long uniform, and nonuniform air-gap region. The positive torque region is wider than a conventional 4/2 SRM without any torque dead zone. A prototype is tested and the efficiency is up to 72[%] at 30,000[rpm], 600[w] output.

• East Asian Economic Review
• /
• v.23 no.3
• /
• pp.285-309
• /
• 2019

Unlike the popular belief, digital transformation mainly gets stymied by legal and regulatory issues related with legacy institutions in Asia rather than technical difficulties. The real challenges triggered by the PSD2 (Payment Services Directive 2) are how the region would overcome the overly fragmented, centralized, and hierarchical legacy framework to allow necessary changes to respond to the digital single market initiatives as promulgated by the European counterpart. The PSD2 is expected to bring about substantial changes in the payment ecosystem by allowing payment service providers to access customers' accounts and transactions information via API that have been traditionally controlled by banks. This paper suggests an incentive-compatible mechanism design for open collaboration among legacy institutions in the region to help them adapt to the PSD2. As evidenced by case studies in Korea, the Asian equivalent of PSD2 can be implemented and further expanded to create region-wide PCS (payment-clearing-settlement) network by reconnecting the dots of legacy infrastructures. These decentralized, diverse, small payment networks can be further combined with the expanded RTGS-CDS platform to evolve into the next phase of Asian Financial Network.

• Journal of Welding and Joining
• /
• v.11 no.4
• /
• pp.70-78
• /
• 1993

An attempt was made to investigate the effect of brazing time on microstructure, microhardness, and corrosion of Zircaloy -4as well as the beryllium diffusion into its sheet. The sheets were coated with beryllium and brazed at $1020^{\circ}C$ for 20-40 minutes in $2{\times}10^{-5}$ torr vacuum atmosphere. 1. Microstructurally the brazed zone was largely divided into three regions: a region of continuous or partially formed of eutectic liquid films along grain boundaries; a region of precipitation in both grains and grain boundaries; a region of elongated wide structure of .alpha.-laths, which was not affected by beryllium. 2. Due to the precipitates, the beryllium-migrated region was hardened and the width of the hardened region increased with increasing brazing time. 3. Beryllium brazed Zircaloy -4 sheets showed a higher corrosion rate than those of as-received and heat-treated at a brazing temperature. 4. Diffusion coefficient of beryllium into Zircaloy -4 at $1020^{\circ}C$ for 30 minutes was $7.67{\times}10^{-7}cm^2/sec.$ It seemed that Be penetrated Zircaloy -4 by forming eutectic liquid films along grain boundaries in the proximity of Be/Zr interface and it, thereafter, diffused into Zircaloy mainly by interstitial solid solution.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.223-226
• /
• 2003

When we detect side-view face in color image, we decide a candidate face region using skin-tone color, and confirm to the face by template matching. Cang Wei use a left and a right template of face, calculate to similarity value by hausdorff method, and decide the final side-view face. It has a characteristic that side-view face is wide spreading neck region. To get exactly result, face region is separated vertically by 3 pixel unit, and matched template. In this paper, we assume that a side-view face is a right side-view or a left side-view face. We separate a half of the candidate face region vertically, and regard a left side as left candidate face, a right side as right candidate face by template matching. This method detect faster than Gang Wei method.