• Korean Journal of Microbiology
• /
• v.22 no.3
• /
• pp.175-181
• /
• 1984

In order to develope a protoplast fusion system for industrial coryneform bacteria, the optimum conditions for the formation and regeneration of progoplast were examined for Brevibacterium flavum and Corynebacterium glutamicum and the protoplast fusion was performed. For the formation of the protoplast of B. flavum and C. glutamicum, the optimum time for penicillin G. treatment to obtain protoplast was mid-exponential growth phase ($O.D_{580}=0.6-0.8,\;8.0{\times}10^7-1.0{\times}10^8cell/ml$). At the optimum conditions (0.3units/ml penicillin G and $400{\mu}g/ml$ lysoyme for treatement), frequencies of protoplast formation and protoplast regeneration were 99% and 25%, respectively. Protoplast regeneration frequency was highest under the optimum conditions for the protoplast formation. Addition of 25mM $Mg^{2+}\;and\;50mM\;Ca^{2+}$ to the regeneration medium further increased the regeneration frequencies. The protoplast fusion frequencies of B. flavum and C. glutamicum in intraspecies fusion were $1.0{\times}10^{-8}\;and\;7.8{\times}10^{-4}$, of the regenerated protoplast respectively, when 33% of PEG (polythylene glycol) 6,000 was used as the fusing agent.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.543-546
• /
• 2005

Optimized conditions for protoplast preparation and regeneration from young hyphae of Monascus ruber were established. Heat shock treatment of spores gave rapid and synchronized germination. Spores collected from cultures grown for 7-8 days at $30^{\circ}C$ were germinated until over 70% germ tubes reached to 3-5 spore length. Enzymatic digestion of young hyphae was optimal with 50 mg/mL Glucanex in 0.1 M sodium citrate buffer containing 0.8 M mannitol as an osmotic stabilizer. Regeneration rate was around 10% when 0.8 M sorbitol was used as an osmotic stabilizer in regeneration medium. These conditions will be applied in genetic study of M. ruber that produces citrinin at high level and thus is good model strain for molecular genetic dissection of citrinin biosynthesis.

• Korean Journal of Microbiology
• /
• v.21 no.3
• /
• pp.156-162
• /
• 1983

Conditions for effcient formation and regeneration of protoplasts of Micromonospora rosaria and Micromonospora purpurea were investigated. The state of inoculm, culture stage and growth in a medium containing partially growth-inhibiting concentration of glycing have significant effects on portoplasting. A high frequency of regeneration (up to 30%) was accomplished with a hypertonic regeneration agar medium defined by Okanishi for Strptomyces. Using the optimal conditions for protroplasting and regeneration, protoplast fusion of auxotrophic M.rosaria was carried out. Polyethylene glycol 1,000 was chosen for fusogenic agent. When signgle auxotrophs were used, the recombinant frequency of auxortrophic markers varied from 1.3 to 3.2%. Using two double auxotrophs, the recombinant frequencies of 0.7-4.3% were obtained. Much lower frequencies(three or more orders of magnitude) were observed by the conventional matings.

• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.89-94
• /
• 1987

The optimal conditions for the protoplast formation and regeneration of Streptomyces mitakaensis have been investigated. S. mitakaensis cells were converted to protoplast by treating with 0.1 mg/$m\ell$ of lysozyme in phosphate-tris buffer (pH 7.2) to the cells grown at the late logarithmic growth phase in the GBYN medium (gycerol 20g, beef extract 5g, yeast extract 5g, NaCl 5g in 1 liter of distilled water) contained 0.5% glycine. Cell regeneration from protoplast was accomplished in 10 days post inoculation on the R2 regeneration agar medium and at 3 days post inoculation on the H2 regeneration liquid medium. The efficiency of the regeneration was 0.l% in 3 days at 35$^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.303-309
• /
• 1988

In order to establish the process of interspecific protoplast fusion of the genus Cellulomonas capable of utilizing of cellulose, C. flavigena NCIB 12901 and Cellulomonas sp. CSI-1, the optimum conditions for the regeneration and fusion were examined. The condition of suitable osmotic stabilizer for the protoplast regeneration of C. flavigena was established by using 0.4M sorbitol. And then, by addition of 3% po]yvinyl pyrrolidone (PVP) to cell wall regeneration medium, regeneration frequency was increased 3 times higher than that without PVP addition. The optimum conditions for the interspecific protoplast fusion between auxotrophic and antibiotics resistant mutants were obtained with 40%(W/V) of PEG (polyethylene glycol) 6000 as the fusogenic agent and 25mM of CaCl$_2$on treating time for 15 min. The fusion frequency between mutants was from 2.0$\times$10$^{-4}$ to 4.0$\times$10$^{-4}$ under the optimum conditions. The fusants were confirmed to revert from protoplast to cells of rod type during regeneration process and the aggregation of protoplast by PEG was observed. Also the progress of fusion was observed by scanning electron microscopy, Many isolated fusants were shown to be complement clones of both parents which occured at a high frequency among the isolated clones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3969-3982
• /
• 2014

This study examined the QM(Quartier Management) Program of Germany for the Regeneration of Deteriorated Residential Blocks in Berlin. This study used basic data research for the 'Neighborhood Management Program' in South Korea. Therefore, German local documents, organization web sites, internal reports were analyzed to understand the status of the Germany's urban regeneration policies and present the conditions. This study was conducted by local interviews, e-mail exchanges and telephone interviews. The following were investigated and analyzed: 1) the present conditions of the urban regeneration policies and regional regeneration in Germany; 2) the characteristics of the QM program (Program's strategy, funding and utilization plans, program's applicable areas, Indicators for regional selection); and 3) examine two cases of the QM Program in Berlin.

• Carbon letters
• /
• v.2 no.1
• /
• pp.44-54
• /
• 2001

The characteristics of adsorption and desorption of benzene and toluene were investigated at a fixed bed packed with the activated carbon and activated carbon fiber. Through breakthrough experiments under various feed concentration conditions, it was found that the slope of mass transfer zone and the tailing in the breakthrough curves were different from the feed conditions due to different heats of adsorption. In hot nitrogen desorption, the regeneration time and mass transfer zone of the toluene desorption curve were longer than those of the benzene desorption curve because of the difference in adsorption affinity. With an increase in the regeneration temperature, the height of roll-up and the sharpness of desorption curves increased but the regeneration times decreased. The adsorption capacities of the activated carbon and activated carbon fiber after three-time thermal regenerations decreased about 25% and 37% for benzene and 18% and 25% for toluene, respectively. To investigate the effect of the regeneration temperature on the energetic efficiency, the characteristic desorption temperatures of toluene and benzene were investigated by calculating purge gas consumption and temperature.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.81-86
• /
• 2009

An efficient and reproducible plant regeneration system was established using transverse thin cell layers (tTCLs) in five cultivars of Brassjca juncea L. The effects of medium conditions, explant types (tTCLs of hypcotyl and cotyledonary petiole) on shoot regeneration were examined in this study. The maximum shoot regeneration frequency was obtained in Murashige and Skoog (MS) medium supplemented with 4 mg/L 6-benzylaminopurine (BA) and 0.2 mg/L 1-naphthaleneacetic acid (NAA). The hypocotyls derived tTCL explants had more shoot regeneration frequency (52%) than the cotyledonary petiole derived tTCL explants. Shoot induction was further improved by the addition of silver nitrate ($AgNO_3$) in the regeneration medium. A significant genotypic effect was also observed between the five cultivars; Rai-5 displayed higher capacities to produce shoots than other cultivars. Regenerated shoots were rooted on MS basal medium without PGRs which induced 90% of roots. The plantlets established in greenhouse conditions with 99% survival, flowered normally and set seeds. The regenerated plants were fertile and identical to source plants.

• Clean Technology
• /
• v.16 no.4
• /
• pp.272-276
• /
• 2010

Adsorption process for the removal of acetylene, especially 2-butyne, from isoprene was studied with zeolite as an adsorbent. In this work, zeolite 5A was selected to investigate the effects of various regeneration conditions by repeated adsorption experiments. The effect of regeneration temperature and desorption pressure was investigated to identity the optimum regeneration conditions. Repeated adsorption and desorption experiments were carried out for 10 cycles to confirm the efficiency of regeneration process under temperature of 423 K and desorption time of 16 h.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.73-80
• /
• 1998

Zinc titanate sorbents were prepared and regeneration of used sorbents for high temperature desulfurization of fuel gases was studied. Zn/Ti molar ratio of prepared sorbents was 1.5 and quartz fixed-bed reactors with 1 cm and 3 cm diameters were used. Regeneration of zinc titanate sorbents at high temperature is exothermic reaction; that brings about deterioration of sorbents. Therefore, we experimented regeneration reaction of zinc titanate sorbents for the purpose of obtaining the most suitable regeneration conditions by changing experimental parameters such as reaction temperature, oxygen concentration, flow rate and steam content. $H_2S$ and $SO_2$ breakthrough curves were obtained during desulfurization-regeneration. Also, properties of the sorbents before and after regeneration were analyzed using SEM, XRD, Hg-porosimetry and BET method. From such results, we obtained the most suitable regeneration conditions including regeneration temperature of 650$^{\circ}$C, $O_2$ content of 5% and steam content of 10% in the gas stream.