• 한국광학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2003

유기발광물질 Alq$_3$ 복소굴절률을 양자역학적 흡수이론인 바탕인 포로히-블루머(Forouhi-Bloomer) 분산식[Phys. Rev. B 34. 7018(1986)]을 이용하여 1.5~6 ev의 영역에서 계산하였다. 분광광도계를 이용하여 측정한 Alq$_3$ 박막의 흡수 스펙트럼에서 흡수 피크의 위치와 폭으로부터 포로히-블루머 분산식의 변수 $A_{i}$ , B$_{i}$, $C_{i}$ 의 초기 근사값을 결정하였다. 기판으로 사용한 비정질실리카(fused silica)의 굴절률은 분광광도계로부터 측정된 투과율과 반사율 스펙트럼으로부터 셀마이어(Sellmeier)분산식을 적용하여 계산하였다. 기판의 굴절률과 분광광토계에서 측정한 Alq$_3$박막의 투과율과 반사율 스펙트럼에 포로히-블루머 분산식을 이용한 비선형 최소자승법 곡선맞춤을 하여 Alq$_3$의 복소굴절률을 계산할 수 있었다.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.73-80
• /
• 1998

This Study was performed to get the suitable oil dispersion agent by assessment of color strength of organic pigment in non-aqueous systems. Organic pigment is used as a color expression material with other body pigments in the make-up products. But occasionally aggregation or agglomeration occurs for the lack of affinity with medium, This function is the cause of disturbing homogeneous dispersion, and then bring about an instability of products. Our study, research of dispersion mechanism between the pigment and oil phase, has been executed to solve this problem, and find a oil dispersion agent having optimum dispersion condition. Generally dispersion is related to between the solid-liquid mutual properties and electrical phenomena associated with solid-liquid interface. This factor is determined to input energy, milling time, optical properties, particle size, rheological properties, etc. Ideal dispersion state is told that coloring primary solid particle is homogeneously dispersed in medium. Good dispersed colorants are strongly and clearly appeared. We are already known that the particle size of organic pigment, chemical properties and viscosity of medium, refractive index. Consequently We determine the affinity of medium and organic pigment by measuring of color strength in the same mechanical condition. UV-VISIBLE RECORDING SPECTRO PHOTOMETER is used for measuring apparatus. We can decided the dispersion level of oil dispersion agent by measuring absorbance of color strength in the visible range that diluted medium for colloid colorant particles.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.163-170
• /
• 2016

Because of rapid technological advancements, increased data rate support has become the key criterion for future communication medium selection. Multimode optical fibers and multicore optical fibers are well matched to high data rate throughput requirements because of their tendency to support multiple modes through one core at a time, which results in higher data rates. Using the numerical mode solver OptiFiber, we have designed a concentric core fiber by investigating certain design parameters, namely core diameter (µm), wavelength (nm), and refractive index profile, and as a result, the number of channels, material losses, bending losses, polarization mode dispersion, and the effective nonlinear refractive index have been determined. Space division multiplexing is a promising future technology that uses few-mode fibers in parallel to form a multicore fiber. The experimental tests are conducted using the standard second window wavelength of 1,550 nm and simulated results are presented.

• 한국결정성장학회지
• /
• 제9권4호
• /
• pp.424-431
• /
• 1999

The reproducibility of successive growth of $Bi_{12}TiO_{20}$ (BTO) single crystlas using a top-seeded solution growth (TSSG) pulling method was evalutated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established expermentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasized that a starting solution, with a 10.0~10.1 mol% $TiO_{2}$ concentration, results in large single crystals with a highly homogeneous lattice constant of within ${\pm}1{\times}10^{-4}\AA$, when the solidified fraction of the grown crystal is less than about 45 %. A wavelength dispersion of refractive index was measrued for the first time, and it was verified that the refractive index of BTO is larger than that of BSO($Bi_{12}TiO_{20}$), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.60-68
• /
• 2000

The optical constants ($E_g^d$, n, K) of the polycrystalline CdSe thin films deposited on the glass substrate by the electron-beam evaporation technique are determined over 400~2,500 nm photon wavelengths. In order to explain the variation of the optical contents with film thickness and substrate temperatures, the surface microstructural parameter are investigated by AFM (atomic forced microscope( images for the films deposited by different growth conditions. It is shown that the variations of optical constants are close related to changes of the surface morphology of the CdSe thin films. The decrease in the band gap with film thickness is connected with quantum size effects due to increase of the grain size. The refractive index of CdSe films decrease with increasing the grain size of the films, and the dispersion of the refractive index followed a single oscillator model according to the Sellmeier formulation.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.353-360
• /
• 2020

Adopting an elaborately designed reflective objective consisting of four mirrors, we have developed a rotating-polarizer-type microspot spectroscopic ellipsometer (SE) with an ultra-small spot size. The diameter of the focused beam, whether evaluated using a direct-image method or a knife-edge method, is less than 8.4 ㎛. After proper correction for the polarizing effect of the mirrors in the reflective objective, we unambiguously determine the dispersion of the complex refractive index and the thickness of monolayer MoS₂ using the measured microspot-spectroellipsometric data. The measured ellipsometric spectra are sensitive enough to identify small variations in thickness of MoS₂ flakes, which ranged from 0.48 nm to 0.67 nm.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.27-32
• /
• 2013

Based on the dispersive feature of the dielectric function of noble metals and the wave vector conservation in physics, both the plasma effect and the complex refractive index, which are profoundly correlated to the complex dielectric function and permeability, have been studied and analyzed. The condition to induce a bulk or a surface plasma in the visible region will not be satisfied, and there will be one solution for the real and the imaginary parts of the refractive index, restricting it only to region I of the complex plane. The results given in this work will aid in understanding the properties of light transmission at the metal/dielectric interface as characterized by the law of refraction in nature.

• 한국광학회지
• /
• 제10권3호
• /
• pp.181-187
• /
• 1999

대표적인 이차 비선형 광학 물질인 곁가지형 NPP(N-(4-nitrophenyI)-(L)-prolinol) 고분자 박막을 스핀코팅으로 제작하였다. 위상변조방식의 분광타원해석기를 사용하여 코로나 특성배향법으로 온도와 전기장을 변화시켜가며 실시간으로 타원해석 스펙트럼을 측정하였다. 광투과영역에서의 타원해석상수를 모델링분석하여 박막의 두께를 구하였고, 광합수영역에서는 타원해석상수의 역방계산을 통해 굴절율과 소광계수를 구하였다. 분광광도계를 사용하여 배향 전후 각각의 상태에 따른 광 투과율 스펙트럼을 측정한 후 이를 되먹임 관계식에 적용하여 구한 소광계수가 분광타원해석법으로 결정한 결과와 일치함을 확인하였다. 또한 두께가 비교적 얇은 시료의 타원해석 스펙트럼을 코로나배향 전후에 걸쳐 분석한 후 시료 면에 수직한 수직 복소굴절율과 시료 면에 평행한 수평 복소굴절율을 각각 결정하였다. 이 수직과 복소굴절율을 기준데이터로 사용하고 모델링 과정을 적용하여 배향의 각 단계별로 유효 수직조성비를 결정하여 두꺼운 고분자 박막의 배향된 정도를 정량화하는 분석모델을 제시하였다.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.363-369
• /
• 2016

탄소나노튜브와 그래핀 등으로 대표되는 탄소 동소체기반 나노재료의 우수한 기계적 특성을 이용해 콘크리트의 압축강도를 증가시키기 위한 연구가 활발히 진행되고 있다. 일반적으로, 나노재료 적용을 통한 강도 향상을 위해서는 콘크리트 내 나노재료의 분산성이 높아야 하며, 이를 검증하기 위해 외부에서 비파괴적으로 확인할 수 있는 검사 기술이 요구된다. 본 연구에서는, 적외선의 직진성과 마이크로파의 투과성을 동시에 갖고 있는 THz 전자기파를 이용하여 MWCNT 및 GO가 포함된 두 종류의 나노시멘트 모르타르 시편을 제작하여 굴절률 및 흡수율과 같은 기초 광학물성 측정 시험을 수행하였다. 시험을 통해 일반 시멘트 모르타르에 비해 나노재료가 포함된 시편에서 굴절률은 평균 1.0~2.5%, 흡수율은 평균 -14~28% 차이로 측정됨을 확인하였다. 이를 통해, 비파괴적으로 콘크리트 내부에 포함된 나노재료의 분포도를 영상화할 수 있는 기술의 실현 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2456-2458
• /
• 1999

The polarization mode dispersion (PMD) that restricts the transmission bandwidth was investigated in standard long single mode fiber which optimized at 1.3${\mu}m$. Although fiber has perfect circular symmetry, each optical fiber has different refractive index profiles. The investigation of PMD with random mode couplings were conducted in three kinds of fiber by the time-domain interferometric method. By using two manufacturing methods, MCVD(Modified Chemical Vapor Deposition) method and VAD(Vapor Phase Axial Deposition) method, the property of mechanical asymmetric lateral pressure, bending and twisting induced polarization mode dispersion were measured. The concatenated optical fibers were compared with other types.