• 제목/요약/키워드: reflective ratio

검색결과 110건 처리시간 0.035초

A Method of Controlling the Diffusing Reflector Properties for Reflective Displays

  • Masutani, Akira;Roberts, Tony;Schuller, Bettina;Durr, Michael;Yasuda, Akio;Sakaigawa, Akira
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.415-418
    • /
    • 2004
  • The performance of dichroic sponge polymer dispersed liquid crystals (D-SPDLC) can be improved further by modifying the TFT diffusing reflector using a $TiO_2$ layer. A metal-like glare was suppressed, and a wider viewing angle than previously reported was achieved. The display showed above newspaper-standard reflectivity and contrast ratio.

  • PDF

Development of Reflective Paper-like Display with Triboelectrically Charged-polymer Particles

  • Cho, Won-Ki;Kwon, Soon-Hyung;Lee, Sung-Guk;Kim, Nam-Jin;Ryu, Byung-Gil;Song, Moon-Bong
    • Journal of Information Display
    • /
    • 제6권3호
    • /
    • pp.30-35
    • /
    • 2005
  • We have developed a paper-like display using polymer particles charged triboelectrically. By using a toner-type display with a simple structure, we continued that polymer particle movement is controlled by only a voltage difference between scan and data electrode. We fabricated a diagonal 2.4 inch panel on the glass substrate and successfully produced an image by the passive driving method with operating voltages of about ${\pm}$ 120 V. The contrast ratio was 4:1.

Optical Configurations for an Achromatic Transflective Liquid Crystal Cell

  • Lee, Gak-Seok;Kim, Jae-Chang;Yoon, Tae-Hoon;Kim, Young-Sik;Kang, Tae-Hoon;Kang, In-Byeong
    • Journal of Information Display
    • /
    • 제7권1호
    • /
    • pp.19-24
    • /
    • 2006
  • We propose optical configurations of a double-cellgap liquid crystal cell for transflective displays with wide viewing angle and high contrast ratio. The reflective part is designed in the wide-band quarter wave structure to achieve good dark state. For the transmissive part, the compensation method is applied to achieve the super-achromatic dark state, and three switching methods are used : which are vertical switching, horizontal switching to $30^{\circ}$and horizontal switching to $120^{\circ}$, to achieve the bright state.

사출/압축 및 RHCM 기술이 7인치 도광판 마이크로 패턴 전사성에 미치는 영향에 대한 실험적 연구 (An Experimental Study on the Replication Ratio of Micro Patterns of 7 inch LGP using Injection/Compression and RHCM)

  • 조성우;김종선;황철진;윤경환;강정진
    • 소성∙가공
    • /
    • 제20권1호
    • /
    • pp.11-16
    • /
    • 2011
  • Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

분석툴을 이용한 천리안2A 기상탑재체 복사 보정 파라미터 검증 (Verification of GEO-KOMPSAT-2A AMI Radiometric Calibration Parameters Using an Evaluation Tool)

  • 진경욱;박진형
    • 대한원격탐사학회지
    • /
    • 제36권6_1호
    • /
    • pp.1323-1337
    • /
    • 2020
  • 천리안2A호 AMI(Advanced Meteorological Imager) 복사 보정에 대한 검증은 탑재체의 기능 및 성능 점검뿐만 아니라, 탑재체 자료의 품질을 결정 짓는 중요한 요소이다. AMI 탑재체는 여섯 개의 가시 및 근적외 채널과 10개의 열적외 채널로 구성되어 있다. 가시/근적외 채널의 복사 성능을 대표하는 핵심적인 파라미터로는 SNR(Signal-to-Noise Ratio), 열적외채널의 경우는 NEdT(Noise Equivalent delta Temperature)를 들 수 있다. 다이나믹 레인지와 검출기의 반응도와 관련된 Gain 값 또한 복사 보정 성능과 관련된 중요한 파라미터이다. AMI 탑재체의 주요 복사 보정 성능 검증을 위해, 실시간 AMI자료 처리 시스템과는 별도의 오프라인 복사 성능 분석 툴을 개발하였다. 개발된 분석 툴을 이용하여 천리안2A호 발사 후 궤도상 시험 기간 동안 검증 작업을 수행하였다. 분석 툴을 통한 계산 결과는 탑재체 개발업체인 HARRIS사의 분석 값과 비교 검증하였다. AMI 복사 성능 검증 작업은 총 세차례로 나누어 AMI탑재체 양쪽 면인 Side1과 Side2에 대해 이루어졌다. 복사 성능 검증 결과 주요 복사 보정 파라미터들의 성능은 요구조건 값들을 크게 상회하는 우수한 성능을 보여 주었으며, AMI 복사 성능 분석 툴의 유효성이 입증되었다.

PET 필름의 이축연신에 따른 물성변화 연구 (Investigation of Properties of the PET Film Dependent on the Biaxial Stretching)

  • 이중규;박상호;김성훈
    • 폴리머
    • /
    • 제34권6호
    • /
    • pp.579-587
    • /
    • 2010
  • PET 필름의 물성을 연구하기 위하여 PET의 $T_m$ 보다 높은 다양한 온도에서 압출 후, $18^{\circ}C$로 급냉하였고, 종방향(MD)과 횡방향(TD)으로 각기 다른 연신비 및 다양한 열고정 온도로 제조되었다. 압출 온도, 연신비, 열고정 온도에 따른 PET 필름의 열수축 거동, 밀도, 결정화거동, 열적거동 및 광학적 물성 등의 변화에 대하여 고찰한 결과, MD와 TD 방향의 열수축률은 열처리온도와 압출 온도가 감소함에 따라 증가하였고 연신비가 증가함에 따라 증가하였다. 결정화도와 밀도는 열처리온도와 압출 온도가 증가함에 따라 증가하였고, 융해열(${\Delta}H$)과 예비융점($T_m'$)의 경우 열처리온도와 압출 온도의 증가와 함께 증가하였다. 수평균 분자량과 고유점도는 압출 온도가 증가함에 따라 감소하였고, 인장강도와 탄성률의 경우 연신비가 증가함에 따라 증가하였으나, 열처리온도를 증가하였을 때에는 감소하는 경향을 보였다. 연신 방향과 두께 방향의 굴절률은 연신비와 열처리온도가 증가함에 따라 증가함을 확인하였다.

콜로이드 실리카 나노입자의 부착에 의한 반사방지막 제조 및 굴절율 조절 (Convective Deposition of Silica Nano-Colloidal Particles and Preparation of Anti-Reflective Film by Controlling Refractive Index)

  • 황연
    • 한국재료학회지
    • /
    • 제15권5호
    • /
    • pp.285-292
    • /
    • 2005
  • Anti-reflection film was coated by using spherical silica nano colloids. Silica colloid sol was reserved between two inclined slide glasses by capillary force, and particles were convectively stacked to form a film onto the substrate as the water evaporates. As the sliding speed increased, the thickness of the film decreased and the wavelength at the maximum transmittance decreased. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness was measured by proffer and calculated from the wavelength of maximum transmittance and the effective refractive index. The effective refractive index of the film could be controlled by a subtle controlling of the coating speed and by mixing two different sized silica particles. When the 100 nm and 50 m particles were mixed at 4:1-5:1 volume ratio, the maximum transmittance of $95.2\%$ for one-sided coating was obtained. This is the one that has increased by $3.8\%$ compared to bare glass substrate, and shows that $99.0\%$ of transmittance or $1.0\%$ of reflectance can be achieved by the simple process if both sides of the substrate are coated.

토너입자형 디스플레이의 평가방법 제안 (A Proposal of the Evaluation Method of Toner Particle Type Display)

  • 김철우;김영조
    • 한국전기전자재료학회논문지
    • /
    • 제23권9호
    • /
    • pp.691-695
    • /
    • 2010
  • A measurement method of the particle-based reflective display is proposed, estimated, and compared with reported method. The reflectivity measurement by previous studies is simply obtained by integrating sphere, but it has a limitation for the estimation of real moving particles because its data include surface reflection and incomplete attachment on electrodes. To get the number of real moving particles, the area by attached particles on the electrodes is calculated at microscopic signals. The moving particles on subthreshold voltage are observed and this fluctuational variation of surface on subthreshold voltage gives a tip to understand the driving mechanism. By this measurement we ascertained the relationship of a particle layer and real driving particles, and the feasibility of observation and estimation for moving color particles, which were measured by the reflectivity and CIE (Commission Internationale de I'Eclairage) system of color specification at previous studies.

Single cell gap polymer-stabilized blue-phase transflective LCDs using internal nanowire grid polarizer

  • Cui, Hong-Qing;Ye, Zhi-Cheng;Hu, Wei;Lin, Xiao Wen;Chung, T.C.;Jen, Tean-Sen;Lu, Yan-Qing
    • Journal of Information Display
    • /
    • 제12권3호
    • /
    • pp.115-119
    • /
    • 2011
  • Optically isotropic liquid crystal (LC) mixture such as blue-phase LC and nanostructured LC composites exhibit the advantages of fast response time, high contrast ratio and wide-viewing angle due to the induced birefringence along the horizontal electric field. Utilizing this mixture, a novel single cell gap in-plane switching-type polymer-stabilized blue-phase transflective liquid crystal display by embedding the nanowire grid polarizer as a polarization-dependent reflective polarizer in the R region is proposed. This device can be used as a normal black mode without any quarter-wave plate or patterned in-cell phase retarder. Moreover, the transmittance is identical to the reflectance so that it will be suitable for single gamma driving. Detailed electro-optic performances, such as voltage-dependent light efficiency and viewing angle of the proposed device configuration, are investigated.

200kW 탑형 태양열발전시스템에서 사용되는 Heliostat의 집열특성 분석 (Analysis of Energy Concentration Characteristics of Heliostat used in 200kW Tower Type Solar Thermal Power Plant)

  • 박영칠
    • 한국태양에너지학회 논문집
    • /
    • 제31권3호
    • /
    • pp.80-88
    • /
    • 2011
  • Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a solid understanding of heliostat's energy concentration characteristics is the most important step in designing of the heliostat field and the whole power plant. The work presented here is the analysis of energy concentration characteristics of heliostat used in 200kW solar thermal power plant, where the receiver located at 43m high in tower has $2{\times}2$m rectangular shape. The heliostat reflective surface is formed by 4 of $1{\times}1$m flat plate mirror facet and the mirror facet is mounted on the spherical frame. The direct normal incident radiation models in vernal equinox, summer solstice, autumnal equinox and winter solstice are first derived from the actually measured data. Then the intercept ratio, heat flux distribution and total energy collected at the receiver for the heliostats located in the various places of the heliostat field are investigated. Finally the effect of mirror facet installation error on the optical performance of the heliostat is analyzed.