• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.103-113
• /
• 2012

본 연구에서는 하수재이용에 따른 논에서의 토양염분 변화를 추정하기 위하여 경기도 화성시 수원환경사업소 인근에 위치한 병점지구를 대상으로 수문순환과 작물성장과의 관계를 고려한 SWAP (Soil-Water-Atmosphere-Plant) 모형을 이용하여 평가하였다. 실험에 사용한 관개용수는 지하수 (TR#1), 하수처리장 방류수+여과+UV (TR#3)로 분류하여 모형에 사용하였다. 유입관개수의 EC (Electrical Conductivity)는 지하수 관개수인 TR#1이 다른 처리구에 비해 작았고, TR#3의 경우 0.442~0.698 dS $m^{-1}$의 범위를 보였다. 모형의 보정과 검정을 위해서 대상지구에 FDR (Frequency Domain Reflection)을 설치하여 토양수분함유량과 염분농도를 토심에 따라 일단위로 모니터링 하였다. 토심 (50, 100, 140 cm)에 따른 토양함수량의 RMSE는 검정기간 중 TR#1에서 0.003~0.064 $cm^3\;cm^{-3}$, TR#3에서 0.001 $cm^3\;cm^{-3}$ 범위를 보여 주었고, 토양염분의 보정기간 중 토심별 RMSE는 TR#1에서 0.018~0.037 dS $m^{-1}$, TR#3에서 0.004~0.014 dS $m^{-1}$ 범위를 보여 적용성이 있는 것으로 나타났다. 토양내의 염분수지 분석 결과, 토양에서의 염분저장량이 (-)로 나타나 토양내로 침출되는 것으로 나타났으며, WMRI (Water Management Response Indicators)을 이용한 분석 결과, 높은 침투능으로 인하여 토양에서의 염분 집적 영향은 낮은 것으로 평가되었다.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.109-116
• /
• 2007

To reduce the effect of color distortions on reading colors, it is more desirable to statistically process as many pixels in the individual color region as possible. This process may require segmentation, which usually requires edge detection. However, edges in color codes can be disconnected due to various distortions such as dark current, color cross, zipper effect, shade and reflection, to name a few. Edge linking is also a difficult process. In this paper, k-means clustering was performed on the images where edge detectors failed segmentation. Experiments were conducted on 311 images taken in different environments with different cameras. The primary and secondary colors were randomly selected for each color code region. While segmentation rate by edge detectors was 89.4%, the proposed method increased it to 99.4%. Color recognition was performed based on hue, a*, and b* components, with the accuracy of 100% for the successfully segmented cases.

• Korean Journal of Optics and Photonics
• /
• v.23 no.2
• /
• pp.55-63
• /
• 2012

We present results of optical design and fabrication of a light guiding plate (LGP) to be used as an illumination system for photobioreactors. Modeling of a light-emitting diode (LED) light source, a reflection film, and LGP patterns was performed. Especially, the LGP patterns were modeled as Lambertian scatterers. The modeling parameters (reflectance, scatterer width) were determined through matching simulations with the experimentally measured illuminance distribution for a test LGP. An LGP for an LED light source was designed with the extracted model parameters, and fabricated using a computerized numerical control machine. Optical characteristics including average illuminance and uniformity of illuminance distribution were measured for the fabricated LGP.

• 전자공학회논문지 IE
• /
• v.44 no.4
• /
• pp.48-54
• /
• 2007

Due to the diverse utilization of multimedia, interests are increasing towards processing (saving, editing, searching, etc) three dimensional object data. This paper proposes and realizes a retrieval system for three dimensional objects using reflective symmetry. For the retrieval method, a reflective symmetric axis with a projector is used. The symmetric plane is calculated by the reflection symmetry, and the depth buffer is calculated for the symmetric plane. Then, by applying the Fourier Transform to the depth buffer, the feature vector for the object is generated and retrieved. For the sample of inquiry, the model of similar symmetry was extracted using the benchmark data from Konstantz University. Considering that most of the objects have symmetrical characteristics, the proposed method of retrieving three dimensional objects using a reflective symmetric surface is an outstanding retrieval system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.553-567
• /
• 2011

During the last three years, the possibility of the time reversal Lamb waves has been paid attention to for structural health monitoring of a plate. This study proposes a numerical scheme which can simulate the spatial focusing of time reversal Lamb waves on a rectangular plate. In this scheme, a time reversal process is formulated in the frequency domain using active virtual sensors being equivalent to the mirror effects of an actual sensor due to wave reflection on the plate boundary. Forward and backward Lamb wave propagations are represented by scalar functions for simulating the spatial focusing of time reversal Lamb waves. The validity of the proposed scheme is demonstrated through the comparison to the results of finite element analysis in which the spatial focusing of time reversal Lamb waves is realized by wafer-type piezoelectric(PZT) transducers collocated on a rectangular plate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.95-104
• /
• 2012

Pattern recognition using ensemble classifiers is composed of strong classifier which consists of many weak classifiers. In this paper, we used feature extraction to organize strong classifier using static camera sequence. The strong classifier is made of weak classifiers which considers environmental factors. So the strong classifier overcomes environmental effect. Proposed method uses binary foreground image by frame difference method and the boosting is used to train crowdedness model and recognize crowdedness using features. Combination of weak classifiers makes strong ensemble classifier. The classifier could make use of potential features from the environment such as shadow and reflection. We tested the proposed system with road sequence and subway platform sequence which are included in "AVSS 2007" sequence. The result shows good accuracy and efficiency on complex environment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.1
• /
• pp.37-46
• /
• 2004

In this paper, we propose an improved reproduction algorithm for a realistic image of the real scene based on the spectral distribution of lights and objects. The proposed method for the realistic image is focused on a more accurate reproduction of an image incident on the sight of the viewer. At first, to reproduce an image accurately incident on a sight of viewer, we used the backward ray tracing method based on spectral distribution of object and illuminant representing its physical characteristic used in real. Next, we propose utilizing the improved shading model of the reproduction algorithm of realistic image by applying Bouguer-Beer's law to consider an optical absorptive property of transparent objects. We also define a new ambient light term which is considered the diffuse reflection of neighboring objects instead of constant ambient light. The simulation results show that the proposed algorithm can reproduce the visually similar image with a scene incident on a sight of viewer.

• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.183-191
• /
• 2009

Finite difference method using not general SSG (standard staggered grid) but RSG (rotated staggered grid) was applied to simulation of elastic wave propagation. Special free surface boundary condition such as imaging method is needed in finite difference method using SSG in elastic wave propagation. But free surface boundary condition in finite difference method using RSG is easily solved with adding air layer or vacuum layer. Recently PML (Perfectly Matched layer) is widely used to eliminate artificial reflection waves from finite boundary because of its' greate efficiency. Absorbing ability of CPML (convolutional Perfectly Matched Layer) that is more efficient than that of PML and CPML that don't use splitting of wave equation that should be adapted to PML was applied to FDM using RSG in this study. Frequency absorbing characteristic and energy absorbing ability in CPML layer were investigated and CPML eliminated artificial boundary waves very effectively in FDM using RSG in being compared with that of Cerjan's absorbing method. CPML method also diminished amplitude of waves in boundary layer of solid-liquid model very well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.28-33
• /
• 2002

In this paper, the impedance-tuned monopole microstrip antenna designed for PCS is analyzed using finite difference time domain(FDTD) method. The perfectly matched layer(PML) absorbing material condition proposed by Berenger is used for the truncation of finite difference time domain lattice. A Gaussian pulse is selected as an excitation signal and a resistive voltage source model is used to reduce the error caused by the reflection waves. The FDTD method is inherently a near field technique. Therefore, the near field to far field transformation is need to compute far field antenna parameters such as radiation patterns and gain. The near field to far field transformation can be done both in the time domain and the frequency domain. We use the frequency domain transformation to compute the far field radiation patterns at single frequency. All the numerical results obtained by the FDTD method are compared with simulation results using the HFSS software. Good agreements are obtained in all cases.