• Journal of electromagnetic engineering and science
• /
• 제10권2호
• /
• pp.45-49
• /
• 2010

This paper presents an analytical formulation of the numerical reflection coefficient of the ID-FDTD scheme at the planar dielectric boundary for a TM wave incidence. The reflection coefficient is formulated in an approximate manner, and the accuracy of this method is numerically verified. The effective dielectric constant for a grid on the interface is obtained, and then reduced to that of the Yee scheme for a small cell size.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.

• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.618-626
• /
• 1998

This paper describes a series of fundamental studies on reflection and emission of weak pressure waves from an open end of a pipe. Acoustical theories which have been employed in the plane pressure waves inside a pipe are applied to the present study. The objective of the present study is to investigate the reflection or emission coefficient of pressure wave at an open end of a pipe, the length of open end correction, and the directivity characteristics of the pressure waves emitted from the pipe. The results show that the reflection coefficient of pressure wave at an open end and the length of open end correction decrease for the wave length of pressure wave to increase. It is also found that the reflection coefficient for a baffle plate at the exit of pipe is larger than that for no baffle plate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.699-704
• /
• 2002

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(Multiple Signal Classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique is also used to reduce the coherence between the incident and reflected waves. The test materials were modeled as a locally reacting surface. Numerical and experiment results are performed to verify the acuracy of proposed method.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.438-444
• /
• 2003

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(multiple signal classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique Is also used to reduce the coherence between the incident and reflected waves. Numerical and experiment results are performed to verify the accuracy of proposed method.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.244-245
• /
• 2014

Recently, the studies on submerged breakwater are increased due to needs considering the quality of water and the scenic view. In this paper, waves coming to permeable submerged breakwater coming with oblique angle are computed numerically by using wave pressure function. The wave pressure function throughout the analytical region including the fluid and submerged breakwaters is used. An unknown quantity expressed by the wave pressure function is simulated by boundary element method. The maximum reflection coefficient shows the tendency of decrease with the increase of oblique angle and The reflection coefficient shows the tendency of increase with the increase of the values of the linear dissipation coefficient and the added mass coefficient. It is means that the reflection coefficients are strongly dependent on the oblique angle and resistance coefficients.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.45-51
• /
• 2003

본 연구에서는 경계요소법을 이용하여 불투과성 사다리꼴형상 잠제에 의한 파랑의 반사율과 투과율을 이론적으로 수치해석 하였다. 해석기법으로는 유체와 투과성 영역을 동시에 해석할 수 있는 파압함수를 사용하였으며, 이론적으로 간단히 하기 위해, 투과성 영역내의 파랑의 운동은 선형소산계수와 부가질량계수를 도입하여 정식화하였다. 사다리꼴형상 잠제의 소파특성은 잠제의 법면경사의 변화에 대한 의존도가 높은 것을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1754-1762
• /
• 2016

Finite difference analysis were applied to study the principle operation of monopole antenna for moisture determination in oil palm fruit at 2 GHz. The electromagnetic field interact with oil palm fruit on the interface between the antenna and oil palm fruit and cause a reflection. The reflection measurement is based on mismatch impedance or dielectric properties between two media. Reflection coefficient is used to quantify the level of reflection. The monopole antenna was made of RG405/U semi-rigid coaxial cable with an inner and outer diameter of 0.45 mm and 1.50 mm, respectively with 2.23 mm length of protruding conductor over 5.66 cm length of monopole antenna. This monopole antenna for moisture detection was compared with induced EMF method in terms of reflection coefficient at 2 GHz. The results show that the complex reflection coefficient measured using monopole antenna provides significant results to predict moisture content in oil palm fruit.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.90-94
• /
• 2013

This paper reports the results obtained for there flection and transmission coefficients on rubble mound breakwaters in Busan Yacht Harbor. A2D physical model test was conducted in the wave flume at the Coastal Engineering Research Laboratory at Pusan National University, Busan, South Korea. In this study, physical model tests were completed to further our understanding of the hydrodynamic processes that surround a rubble mound structure subjected to irregular waves. In particular, the reflection and transmission coefficients, as well as the spectrum transformation, were analyzed. This analysis suggests that with an increase in wave height around a rubble mound, the reflection coefficient drastically increases at each water level (HHW or MSL or LLW). Moreover, when the water level changes from HHW to LLW, the reflection coefficient is suddenly reduced. A further result of the analysis is that the transmission coefficient strongly drops away from the rear of the structure. Finally, in regard to the rubble mound breakwater in Busan Yacht Harbor, a consideration of the reflection and transmission coefficients plays an important role in the design.

• 한국전자파학회논문지
• /
• 제23권1호
• /
• pp.29-37
• /
• 2012

본 논문에서는 능동 위상 배열 안테나(APAA: Active-Phased Array Antenna)의 능동 반사 계수(ARC: Active Reflection Coefficient) 개선 및 보호 회로 구성을 통한 안정적인 시스템 운용에 관하여 연구하였다. 수동 위상배열 안테나에서와 달리 APAA는 복사 소자와 송수신 모듈이 결합된 형태로 일반적인 수동 위상 배열 안테나의 반사 계수 특성과 차별된 새로운 ARC의 정의가 적용되어야 한다. ARC는 방사하는 소자로부터의 자기 반사계수 외에 인접한 방사 소자로부터 유기되는 결합량의 중첩을 고려한 반사 계수이다. 이는 능동 위상 배열 레이더(APAR: Active-Phased Array Radar) 시스템의 특성을 예측하고 분석하는데 중요한 파라미터가 된다. 운용 중 발생하는 높은 ARC는 시스템 성능 열화에 직접적인 원인이 된다. 본 논문에서는 APAR의 안정적인 운용을 위한 방안으로 ARC의 성능을 개선시키는 방안과 보호 회로를 통한 열화 방지 방안에 관하여 분석하였다. 실제 제작한 능동 위상 배열 안테나의 실험 결과를 통해 두 방안의 유효성을 검증하였다.