• 천문학논총
• /
• 제30권2호
• /
• pp.767-768
• /
• 2015

Spectra of reflected sunlight from Mars and Jupiter are presented. They were obtained from an educational 1-D array spectrograph covering almost a full range of visible wavelengths, 200~900 nm with 1 nm spectral resolution. The question was whether a spectral difference could be obtained between that of terrestrial planets and gas planets with an educational spectrograph. It was installed in a 12-inch reflecting telescope at the Korea Science Academy of KAIST in Busan. Both spectra show clear absorption lines of reflected sunlight. They shows differences oin line presence, but are not very significant. This work means that the spectrograph successfully observed the reflected spectra of planets and can detect differences in spectra in terms of the absence and presence of absorption lines of planets.

• 천문학논총
• /
• 제30권2호
• /
• pp.761-763
• /
• 2015

Colors have been derived from the observed optical spectrum of Mars and Jupiter. It is known that the planets and the Moon emit reflected sunlight and thus their spectra are similar to the spectrum of solar radiation. The question was then why is the color of Mars different from that of other planets, i.e. red, although it would share the same spectrum of reflected sunlight. Can one derive color from the spectrum? Therefore, we observed the optical spectra of the scattered sunlight in day time for the Moon and Mars using a 1-D array spectrograph on the 12-inch reflecting telescope in the Korea Science Academy of KAIST in Busan, Korea. We adopted the International Commission on Illumination (CIE) in 1931 of three spectral sensitivity peaks for the human eye in short, medium and long wavelengths in visible light. The observed spectra were imposed on CIE sensitivities and the color detected by the human eye was derived. The Mars spectrum represents red color and the Moon white. It is a similar color to that which a human would see. This result means that color is easily derived from astronomical spectra. The appearance of the planets surface can be determined for Mars, which is the result of iron oxide.

• 대한전기학회논문지
• /
• 제33권5호
• /
• pp.173-180
• /
• 1984

The spectra of scattering light fromlaser-produced plasma near its fundamental and second harmonic wavelength were observed respectively by means of spectroscopic technique. The experimental results and the generation mechanism of nonlinear effects such as the second garmonics and the brillouin scattering were analysed theoretically. The spectra of reflected laser light became wider than that of incident laser light. And the peak of spectrum of reflected light shifted to red-side from that of incident light. The second harmonic light is generated from the nonlinear interaction of the incident laser light and the electron plasma wave excited in resonance region by the oblique incidence of laser light to the plasma. The Brillouin backscattering from laser-produced plasmas of hydrogen and deuterium has shown an isotope effect in the red-side region of the generated second harmonic light. This isotope shift is explained by the parametric instability at the cutoff (resonance) region using frequency-and phase-matching conditions of the waves.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.7-10
• /
• 2005

Plant water deficiency during drought season causes physiological stress and can be a critical indicator of forest fire vulnerability. In this study, we attempt to analyze the spectral characteristics of water stressed vegetation by using the laboratory measurement on leaf samples and the canopy reflectance spectra extracted from satellite hyperspectral image data. Leaf-level reflectance spectra were measured by varying moisture content using a portable spectro-radiometer. Canopy reflectance spectra of sample forest stands of two primary species (pine and oak) located in central part of the Korean peninsula were extracted from EO-l Hyperion imaging spectrometer data obtained during the drought season in 2001 and the normal precipitation year in 2002. The preliminary analysis on the reflectance spectra shows that the spectral characteristics of leaf samples are not compatible with the ones obtained from canopy level. Although moisture content of vegetation can be influential to the radiant flux reflected from leaf-level, it may not be very straightforward to obtain the spectral characteristics that are directly related to the level of canopy moisture content. Canopy spectra form forest stands can be varied by structural variables (such as LAt, percent coverage, and biomass) other than canopy moisture content.

• Earthquakes and Structures
• /
• 제25권3호
• /
• pp.199-208
• /
• 2023

Seismic performance analysis is one of the fundamental steps in the design of new or retrofitting buildings. In the seismic performance analysis, the adapted spectral acceleration curve for a given site mainly governs the seismic behavior of buildings. Since every soil site (class) has a different impact on the spectral accelerations of input motions, different spectral acceleration curves have to be involved for every soil class that the building is located on top of. Modern seismic design codes (e.g., Eurocode 8, EC8, or Turkish Building Earthquake Code, TBEC) provide design response spectra for all the soil classes to be used in the building design or retrofitting. This research aims to evaluate the EC8 and TBEC based design response spectra using the spectra of real earthquake input motions that occurred (and were recorded at only soil classes A, B and C, no recording is available at soil class D) in a specific area in Turkey. It also conducts response spectrum analyses of 5, 10 and 13 floor reinforced concrete building models under EC8, TBEC and actual spectral response curves. The results indicate that the EC8 and especially TBEC given design response spectra cannot be able to represent the mean actual spectral acceleration curves at soil classes A, B and C. This is particularly observed at periods higher than 0.3 s, 0.42 s and 0.55 s for the TBEC design response spectra, 0.54 s, 0.65 s and 0.84 s for the EC8 design response spectra at soil classes A, B and C, respectively. This is also reflected to the shear forces of three building models, as actual spectral acceleration curves lead to the highest shear forces, followed by the shear forces obtained from EC8 and, then, the TBEC design response spectra.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권4호
• /
• pp.246-252
• /
• 2017

Non-invasive and non-restrictive methods for measuring the physiological functions of the human body are useful for health care, security, and surveillance. In this paper, a new method that extracts human heartbeat information by utilizing ultra-wideband (UWB) impulse radar is proposed. The amplitude spectra of received radar pulses reflected from the human body are accumulated at specific time intervals, and chirp z-transform (CZT) is used to extract the heartbeat frequency from the amplitude spectra. The heartbeat frequency can be extracted with high-frequency resolution in the frequency band of the heartbeat of interest using CZT. Experimental results to verify the performance of the proposed method show that a highly accurate extraction of the heartbeat frequency is possible using this method.

• 한국식품과학회지
• /
• 제13권2호
• /
• pp.114-120
• /
• 1981

색소(色素)를 흡착(吸着)시킨 여지(濾紙)를 시료(試料)로 간섭(干涉)필터를 통한 자다선(紫多線)을 조사(照射)한 경우에 $45^{\circ}$ 반사각(反射角)에서 발광(發光) 및 소광(消光)의 세기를 측정하여 신속하고 간편하게 색소(色素)를 감별(鑑別)할 수 있는 방법(方法)을 시도(試圖)하였다. 발광(發光) 스펙트럼 보다는 흡수(吸收) 스펙트럼이 보다 특징적인 패턴을 나타냈다. 흡수대(吸收帶)의 파장영역(波長領域), 분포상태(分布狀態) 및 개수(個數)와 소광(消光)정도를 조사하므로써 착색료(着色料) 종류가 용이하게 판별되었다.

• 대한수학회지
• /
• 제34권2호
• /
• pp.483-500
• /
• 1997

We investigate the geometric properties reflected by the spectra of the Jacobi operator of a harmonic map when the target manifold is a Riemannian product manifold or a Kaehlerian product manifold. And also we study the spectral characterization of Riemannian sumersions when the target manifold is $S^n \times S^n$ or $CP^n \times CP^n$.

• 소음진동
• /
• 제2권3호
• /
• pp.181-192
• /
• 1992

A method of measuring the transmission loss of silencer using two microphone technique is described. Two microphone methol is used to elliminate the measurement error due to reflected wave spectra in inlet/outlet duct of silencer. Errors associated with the measurement method are studied. Henceforth the methods to effectively supress the influence are presented. Based on these considertions, the appropriate procedure of experimental set-up to measure the transmission loss a silencer is described with experimental verifications.

• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.32-38
• /
• 2005

FBG 센서는 다중화의 큰 장점으로 인해 다른 여러 광섬유 센서에 비해 더욱 활발한 연구가 진행 되어오고 있다. FBG 센서는 센서 피크 신호의 파장 이동량을 감지함으로써 변형률, 온도 등의 물리량을 측정하는 복조기법을 가지고 있다. 하지만, 센서를 구조물에 부착 혹은 삽입 적용하는 과정에서 구조물의 기하학적인 특성이나 결함 등에 의해 구조물에 변형률 구배가 발생할 수 있으며 이는 센서의 격자 부분에 작용할 경우 센서 피크 신호의 안정성에 영향을 미처 측정 오차로 작용하게 된다. 본 연구에서는 FBG 센서의 격자 부분에 변형률 구배가 작용할 경우 변형률 구배에 따른 FBG 센서의 신호 특성을 고찰하였고 또한 격자의 길이와 변형률 구배의 상관관계에 대해 알아보았다. 이를 통해, 변형률 구배가 작용할 경우 FBG 센서의 적절한 사용 영역을 FBG 센서의 격자 길이에 따라 정량적으로 제시하였다.