• 한국인쇄학회지
• /
• 제18권2호
• /
• pp.1-12
• /
• 2000

This paper proposes a new algorithm classifing same hues in order toe estimate the spectral reflectance of object from 3 band color image information. To estimate the spectral reflectance of object, the conventional estimation methods are required of 5 or 9 band digital color values. The 5 or 9 band image acquisition systems are required of 5 or 3 times same work for color image acquisition process. To solve the above problems, we propose a new method that can be estimated spectra reflectance estimation of object. The proposed method is to classify same hues corresponding a color stimulus, by using hue angle and chroma vector of a color stimulus. The classified same hues are used as the population corresponding a color stimulus. The range of same hue is estimated by the cumulative proportional ration according to the number of basis function.

• 한국의학물리학회지:의학물리
• /
• 제12권1호
• /
• pp.79-94
• /
• 2001

생물학적 조직(Biological Tissue)에서 얻어내는 형광(Fluorescence)은 산란(Scattrering), 흡수(Absorption), 그리고 형광체(Fluorophores)가 원인이 되는, 인트린식 형광(Intrinsic Fluorescence)들에 관한 정보를 갖고 있다. 생물학적 조직의 형광스펙트럼은 조직 내에 존재하는 흡수체(Absorber)와 산란물질(Scatters)들의 영향을 받기 때문에 다른 조직의 생화학적인 인트린식 형광을 선형적인 조합으로 해석할 수 없었다. 생물학적 조직 같은 터비드 매질(Turbid Media)로부터 실험적으로 형광을 얻어서 산란과 흡수의 영향을 조사하기 위하여 본 연구소에서 제작한 장치를 소개하고, 넓은 범위의 흡수체와 산란물질의 농도를 갖고 제작한 조직 팬텀(Tissue Phantom)에 대한 형광과 반사(Reflectance) 스펙트럼을 측정하였다. 형광스펙트럼에 존재하는 산란과 흡수의 왜곡(Distortion)을 제거하기 위하여, 반사스펙트럼에 포함된 산란과 흡수 정보를 이용하는 ‘광자 이동 모델(Photon Migration Model)’을 적용하였고, 이러한 조직모델에 대한 인트린식 형광을 얻었다 연구 결과, 모델 값과 실제 인트린식 형광 스펙트럼이 훌륭하게 일치함을 확인하였다. 이런 연구를 하게된 동기는, 인간의 조직이 병들어서 진화하면 조직의 생화학적 구성의 변화가 발생하고 이때 인트린식 형광의 변화가 생기기 때문이다 결론적으로, 조직에 대한 실시간 광학적 생검에서 병든 조직과 정상조직을 단지 형광스펙트럼만으로 구분하는 것은 어렵지만, 인트린식 형광을 이용하면 가능하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.373-373
• /
• 2016

파푸아뉴기니 열대 우림에 서식하는 극락조의 가슴깃은 독특한 나노 구조를 가지고 있다. 이 독특한 구조에 의해 구조색이 발현된다. 또한 이 구조색은 입사하는 빛의 각도에 따라 색이 변화 하며 아름다운 색을 낸다. 극락조의 가슴깃의 구조는 keratin과 melanin으로 구성 되어 있는데 keratin과 melanin이 한 층씩 교대로 위치하여 multi layer 구조를 가진다. 가슴깃의 단면의 형태는 부메랑 모양의 구조로 되어 있는데 물질은 주로 keratin 으로 이루어져 있고 keratin 내부에 melanin rodlet이 층층이 박혀서 multi layer를 형성한다. 부메랑 모양의 단면에서 keratin 피질의 각도는 약 $30^{\circ}$ 정도로 이루어져 있고 내부의 melanin 기둥이 이루는 층은 약 $11.3^{\circ}$ 정도로 이루어져 있다. 본 연구에서는 극락조 가슴깃의 구조를 도식화 하여 입사하는 빛의 각도에 따라 나타나는 구조색을 FDTD simulation을 통해 계산하였고 실제 구조에 의해 측정된 reflectance spectra와 비교하여 특성이 유사하게 나타남을 확인 하였다. 실제 극락조 가슴깃의 반사 특성은 부메랑 모양 구조의 가운데 부분에서는 파장이 610 nm 정도인 주황빛이 주로 반사가 되고, 부메랑 모양 구조의 양옆 부분에서는 파장이 420 nm 정도인 파란빛이 주로 반사되어 나타난다. 그리고 각도에 따른 구조색의 변화는 보통의 multi layer의 특징과 다르게 나타난다. 입사하는 빛의 각도가 커질수록 reflectance peak가 나타나는 파장이 점점 짧아지는 특징은 일반적인 multi layer와 일치하지만 일반적인 multi layer가 입사 각도가 커질수록 reflectance가 커지는데 반해 극락조 가슴깃의 반사특성은 입사 각도가 커질수록 reflectance는 오히려 작아진다. 우리가 도식화한 구조를 FDTD simulation한 결과는 이러한 특징이 실제 구조의 측정 결과와 일치하게 잘 나타났다. 또한 keratin과 melanin층의 각도 및 두께변화에 따른 reflectance를 FDTD simulation을 통해 계산 해보았고 구조변화에 따른 특징들을 확인해 보았다.

• 한국광학회지
• /
• 제15권1호
• /
• pp.63-67
• /
• 2004

이론적으로 계산된 투과 및 반사 스펙트럼을 실험적으로 측정된 결과에 대해 곡선 맞춤(curve fitting)을 수행하여 콜레스테릭 액정 필름(CLC, cholesteric liquid crystal)의 광학 상수를 결정하였다. 이론적인 투과 및 반사 스펙트럼 계산을 위해 Bewemn의 4${\times}$4행렬법이 사용되었다. 서로 다른 반사밴드를 갖고 있는 세 종류의 샘플에 대해 이 방법을 적용하였다 CLC샘플에 대한 곡선 맞춤 결과로부터 얻은 굴절률 값을 수평 배향된 LC샘플에 대해 측정된 값과 비교하였는데, 두 결과는 세 CLC 샘플에 대한 곡선 맞춤 결과 오차 범위 내에서 일치하였다.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.256-265
• /
• 1997

The objectives of this study were to examine the ability to predict soluble solid and firmness in intact apples based on the visible/near-infrared spectroscopic technique. Two cultivars of apples, Delicious and Gala, were handled, tested and analyzed separately. Reflectance spectra, Magness-Tayor (MT) firmness, and soluble solids in apples were measured sequentially. Maximum and minimum diameters, height, and weight of apples were recorded before the MT firmness tests. A spectrophotometer was used to collect reflectance spectra of intact apples over a wavelength range of 400 to 2, 498 nm. The W firmness tests were conducted using a standard 11.1mm (7/16 in.) MT probe mounted in an Instron universal testing machine. A digital refractormeter was used to measure soluble solid contents in the apples. Apple samples were divided into a calibration set and a prediction set. The calibration set was used during model development, and the prediction set was used to predict soluble solids and firmness from unknown spectra. The method of partial least square (PLS) analysis was used. An unique set of PLS loading vectors (factors) was developed for soluble solid content and firmness. The PLS model showed good correlations between predicted and measured soluble solids of intact apples in 860～1078 nm of the wavelengths. However, the PLS analysis was not good enough to predict the apple firmness.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.116-119
• /
• 2010

Adsorption structures of the self-assembled thin films of $\alpha$-cyano-4-hydroxycinnamic acid (CHCA) anchoring on $TiO_2$ surfaces have been studied by using temperature-dependent diffuse reflectance infrared Fourier-transform (DRIFT) spectroscopy. From the presence of the strong $\nu(COO^-)$ band at ~1390 $cm^{-1}$ along with the disappearance of the OH bands in the carboxylic acid group in the DRIFT spectra at room temperature, CHCA appeared to adsorb onto $TiO_2$ surfaces as a carboxylate form. The absence of the out-of-plane benzene ring modes of CHCA in the DRIFT spectra suggests a rather vertical orientation of CHCA on $TiO_2$. Above ~220$ ^{\circ}C$, CHCA seemed to start to thermally degrade on $TiO_2$ surfaces referring from the disappearance of most vibrational modes in the DRIFT spectra, whereas the $\nu$(C ≡ N) bands were found to remain relatively conspicuous as the temperature increased even up to ~460$^{\circ}C$.

• 농업과학연구
• /
• 제43권5호
• /
• pp.715-722
• /
• 2016

Rapid determination of food quality is important in food distribution. In this study, the chemical properties of oats were analyzed using visible-near infrared (VIS-NIR) spectroscopy. The objective of this study was to develop and validate a predictive model of oat quality by VIS-NIR spectroscopy. A total of 200 oat samples were collected from domestic and import markets. Reflectance spectra, moisture, protein, fat, Fe, and K of oat samples were measured. Reflectance spectra were measured in the wavelength range of 400 - 2,500 nm at 2 nm intervals. The reflectance spectrum of an oat sample was measured after sample cell and reflectance plate spectrum measurement. Preprocessing methods such as normalization and $1^{st}$ and $2^{nd}$ derivations were used to minimize the spectroscopic noise. The partial-least-square (PLS) models were developed to predict chemical properties of oats using a commercial software package, Unscrambler. The PLS models showed the possibility to predict moisture, protein, and fat content of oat samples. The coefficient of determination ($R^2$) of moisture, protein, and fat was greater than 0.89. However, it was hard to predict Fe and K concentrations due to their low concentrations in the oat samples. The coefficient of determinations of Fe and K were 0.57 and 0.77, respectively. In future studies, the stability and practicability of these models should be improved by using a high accuracy spectrophotometer and by performing calibrations with a wider range of oat chemicals.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.35-40
• /
• 2001

A spectral measurement system for reflection and transmission properties by using an optical fiber and an ellipsoidal mirror was newly developed. The hemispherical reflectance and transmittance spectra of several heating resisting ceramics materials were measured from visible to middle infrared region. The directional characteristics of reflection and transmission were also investigated in consideration of the absorptance. The measured data were analyzed by using a four flux model of radiation transfer, The radiation properties could be estimated by the obtained scattering and absorption coefficient spectra.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1158-1159
• /
• 2009

Tri-stimulus values of CIE-XYZ and RGB values obtained by photographic film, CCD camera or scanner depend on the spectral sensitivity of imaging devices and the spectral radiant distribution of the illumination. It is important to record and reproduce the reflectance spectra of the object for true device independent color reproduction and high accurate recording of the scene. In this paper, a method to record the reflection spectra of the object is introduced and its application to spectral endoscopes is presented.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.525-532
• /
• 2000

A new spectroscopic method for pesticide residues detection on agricultural products was developed. The general determination methods are high performance liquid chromatography (HPLC), gas chromatography (GC) or GC-mass spectrometry. They have provided relatively good detection limit and accuracy with complicated and time-consuming (5hrs above) procedures. In addition freshness is very important for evaluating qualities of agricultural products. This requires a simple and fast method for detection of pesticides. Reflectance, transmittance and fluorescence spectrometry of pesticides were tested using UV range because most of pesticides contain conjugation band in the molecular structures. Fluorescence spectrometry showed better sensitive to detect pesticide residues than did reflectance and transmittance spectrometry. Intensity and shape of fluorescence spectra showed different patterns with different structures of pesticides. Detection limit for fluorescence spectrometry was 0.1 ppm to 10 ppm depending on the structures of pesticides. Application of fluorescence spectrometry appears to be an easy method for detection of pesticide residues on agricultural products.