• 생물환경조절학회지
• /
• 제27권1호
• /
• pp.34-39
• /
• 2018

본 연구는 초분광 영상을 이용하여 오이 및 수박과 같은 박과 묘의 수분함량을 추정하기 위해 수행되었다. 오이와 수박 묘 샘플에 수분 스트레스를 가한 후 초분광영상 취득 시스템을 이용하여 오이와 수박 묘 잎을 촬영하여 반사율을 계산하였고, 건조기를 이용하여 해당 모종의 수분함량을 측정하였다. 마지막으로 영상의 반사율과 수분함량을 이용하여 부분최소제곱회귀분석을 통해 수분함량 추정모델을 개발하였다. 오이 묘 수분함량 추정모델은 $R^2$ 0.73, RMSE 1.45%, RE 1.58%의 성능을 보였으며, 수박 묘 수분함량 추정모델은 $R^2$ 0.66, RMSE 1.06%, RE 1.14%의 성능을 보였다. 유효범위를 넘어가는 극단치를 제거하여 모델의 성능을 다시 분석한 결과, 오이 모델의 경우 $R^2$ 0.79, RMSE 1.10%, RE 1.20으로 상승하였다. 오이와 수박 묘를 함께 분석하여 모델을 제작한 결과, $R^2$ 0.67, RMSE 1.26, RE 1.36으로 분석되었다. 오이 모델이 수박 모델보다 비교적 높은 성능을 보였는데, 이러한 원인은 오이의 수분함량 변이가 넓게 분포되어 있었기 때문이라고 판단된다. 또한 데이터셋에서 유효범위를 넘어가는 극단치를 제거한 결과 오이 모델의 정확도 및 정밀도가 상승하였다. 결론적으로 오이 및 수박 묘 수분함량 추정모델들의 추정선의 기울기 차가 크지 않고, 서로 교차되기 때문에 두 모델들은 모두 수분함량을 추정하는데 있어서 유의한 것으로 판단된다. 또한 샘플의 변수가 넓게 분포된 변이를 갖는다면 추정모델의 정확도와 정밀도는 분명 상승할 것이며, 개선된 모델을 이용하면 저가형 센서를 개발하는데 활용될 수 있을 것으로 사료된다.

• 한국측량학회지
• /
• 제33권1호
• /
• pp.1-9
• /
• 2015

원격탐사영상의 기상조건과 계절에 따른 모의는 영상 전처리 단계 중 대기보정 알고리즘의 역방향 구현을 통해 수행될 수 있다. 본 연구는 상용 원격탐사영상처리 프로그램에서 제공되는 대기보정기능으로 보정된 Landsat영상을 특정기상조건이 고려된 대기보정 이전 상태로 모의하는 방법을 실험하였다. 실험에 적용한 방법은 Forster 알고리즘(1984)과 6S RTM (Radiative Transfer Model) 이고, 모의된 결과영상을 특정기상조건의 원영상과 비교하여 일치성을 분석하였다. 6S RTM을 적용한 결과가 Forster 알고리즘보다 일치성이 높았고, 결과연구대상지역 영상으로 모의영상을 제작한 결과, 원영상과의 평균 RMSE of DN difference가 9.35이고, 평균 $R^2$는 0.7이였다. 결과적으로 참조 영상과 계절이 동일하고 시기가 유사한 모의영상 생성 시 실용적 활용 가능성을 입증하였다.

• 한국콘텐츠학회논문지
• /
• 제9권12호
• /
• pp.10-18
• /
• 2009

일반적으로 PDA, 모바일 폰 카메라, PC 카메라 등으로 촬영된 영상은 촬영 장비의 생동 폭의 한계로 인해 낮은 영상 대비를 갖는 영상들이 획득된다. 이러한 이유로 영상 개선 방법은 여러 가지의 영상 촬영 장비를 이용해 촬영된 영상들의 개선을 위해 필요하다. 영상 개선을 위한 몇 가지의 방법들이 제안되었으나, 후광효과(halo-artifact), 회색계의 왜곡(graying-out), 칼라 잡음(color noise) 등의 영상 왜곡이 발생한다. 이러한 문제를 해결하기 위해, 본 논문은 레티넥스 기반 영상 향상 방법을 제안하며, 회색계의 왜곡을 줄이기 위해 HSV 칼라 좌표계를 사용하며, 후광효과를 줄이기 위해 영상을 전역조명성분, 국부조명성분, 반사성분으로 나누는 개선된 영상 생성모델을 적용한다. 실험 결과는 제안한 방법이 다른 방법들 보다 성능이 우수함을 보여준다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3112-3112
• /
• 2001

Near-Infrared Spectroscopy (NIRS) was investigated aiming at the identification of falsified drugs. The identification is based on comparison of the NIR spectrum of a sample with a typical spectra of an authentic drug using multivariate modelling and classification algorithms (PCA/SIMCA). Two spectrophotometers (Brimrose - Luminar 2000 and 2030), based on acoustic-optical filter (AOTF) technology, sharing the same controlling computer, software (Brimrose - Snap 2.03) and the data acquisition electronics, were employed. The Luminar 2000 scans the range 850 1800 nm and was employed for transmitance/absorbance measurements of liquids with a transflectance optical bundle probe with total optical path of 5 mm and a circular area of 0.5 $\textrm{cm}^2$. Model 2030 scans the rage 1100 2400 nm and was employed for reflectance measurement of solids drugs. 300 spectra, acquired in about 20 s, were averaged for each sample. Chemometric treatment of the spectral data, modelling and classification were performed by using the Unscrambler 7.5 software (CAMO Norway). This package provides the Principal Component Analysis (PCA) and SIMCA algorithms, used for modelling and classification, respectively. Initially, NIRS was evaluated for spectrum acquisition of various drugs, selected in order to accomplish the diversity of physico-chemical characteristics found among commercial products. Parameters which could affect the spectra of a given drug (especially if presented as solid tablets) were investigated and the results showed that the first derivative can minimize spectral changes associated with tablet geometry, physical differences in their faces and position in relation to the probe beam. The effect of ambient humidity and temperature were also investigated. The first factor needs to be controlled for model construction because the ambient humidity can cause spectral alterations that should cause the wrong classification of a real drug if the factor is not considered by the model.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.727-731
• /
• 2003

ASTER image has some advantages for classification such as 15 spectral bands and 15m ${\sim}$ 90m spatial resolution. However, in the classification using general remote sensing image, shadow areas are often classified into water area. It is very difficult to divide shadow and water. Because reflectance characteristics of water is similar to characteristics of shadow. Many land cover items are consisted in one pixel which is 15m spatial resolution. Nowadays, very high resolution satellite image (IKONOS, Quick Bird) and Digital Surface Model (DSM) by air borne laser scanner can also be used. In this study, mixed pixel analysis of ASTER image has carried out using IKONOS image and DSM. For mixed pixel analysis, high accurated geometric correction was required. Image matching method was applied for generating GCP datasets. IKONOS image was rectified by affine transform. After that, one pixel in ASTER image should be compared with corresponded 15×15 pixel in IKONOS image. Then, training dataset were generated for mixed pixel analysis using visual interpretation of IKONOS image. Finally, classification will be carried out based on Linear Mixture Model. Shadow extraction might be succeeded by the classification. The extracted shadow area was validated using shadow image which generated from 1m${\sim}$2m spatial resolution DSM. The result showed 17.2% error was occurred in mixed pixel. It might be limitation of ASTER image for shadow extraction because of 8bit quantization data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1244-1247
• /
• 2004

For obtaining the best panel quality of color filter on array(COA) architecture in TFF LCD, we investigated the influence of deposition temperature, $O_2$ flow, thickness on the optical transmittance, wet etching and adhesion properties of IZO deposited onto each color photo resist(red, green, blue). Average transmittance of the pixel single layer in the visible range(between 380 and 780nm) was mainly affected by thickness and showed maximum at 1250 ${\AA}$ while the thickness showing peak transparency in each R, G, B wavelength was different. The relation was calculated by using bi-layer transmission and reflectance model, which corresponded to experimental data very well. The adhesion of IZO deposited on each color PR was found to have enhanced value except red PR case, compared to that of IZO which was deposited on $SiN_x$. Wet etching pattern linearity was decreased as the thickness increased. The thickness of IZO was one of vital factors in order to optimize overall pixel process for fabricating COA structure.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1285-1285
• /
• 2001

For NIR measurements of papers normally diffuse reflectance accessories are used which can provide a large sampling area. The in-line process control FT-NIR spectrometer MATRIX-E enables the contactless measurement of paper samples of low silicone coat weights on label-stocks in a paper converting factory. For this study concentrations of silicone between 0 and 2 g/$m^2$ on various paper substrates were included in a quantitative method. The aim was to achieve an absolute value for the deviation from the target value of 1 g/$m^2$ during continuous movement of the paper with velocities around 400 numinute. Influences from the uncoated paper type due to supplier, color, opacity, area densities, pre-coating as well as different compounds of the agent silicone were investigated and it was found that all these papers can be represented in one PLS-model. Especially the fact that silicone as an element is present in clay coated papers is of no consequence to the measurements with MATRIX-E. Moreover during in-line installations the variation of the moisture contents in the moving paper due to variable machine velocities as well as the reflecting material of the cylinder have to be considered. It is shown that the result of the in-line calibration has the same prediction ability compared to lab scale results(Root Mean Square Error of Cross-Validation RMSECV = 0.034 g/$m^2$).

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1193-1193
• /
• 2001

For NIR measurements of papers normally diffuse reflectance accessories are used which can provide a large sampling area. The in-line process control FT-NIR spectrometer MATRIX-E enables the contactless measurement of paper samples of low silicone coat weights on label-stocks in a paper converting factory. For this study concentrations of silicone between 0 and 2 g/㎡ on various paper substrates were included in a quantitative method. The aim was to achieve an absolute value for the deviation from the target value of 1 g/㎡ during continuous movement of the paper with velocities around 400 m/minute. Influences from the uncoated paper type due to supplier, color, opacity, area densities, pre-coating as well as different compounds of the agent silicone were investigated and it was found that all these papers can be represented in one PLS-model. Especially the fact that silicone as an element is present in clay coated papers is of no consequence to the measurements with MATRIX-E. Moreover during in-line installations the variation of the moisture contents in the moving paper due to variable machine velocities as well as the reflecting material of the cylinder have to be considered. It is shown that the result of the in-line calibration has the same prediction ability compared to lab scale results (Root Mean Square Error of Cross-Validation RMSECV = 0.034 g/㎡).

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.1-6
• /
• 2006

The purpose of this study is to develop to portable near infrared analyzer measuring the sugar content of the fruits on a tree before harvesting ones. The portable near infrared system consists of a tungsten lamp, a coaxial optical fiber bundle and a multi-channel detector, which has 256 pixels and a concave transmission grating. Reflectance NIR spectra of orange were recorded by using a coaxial optical fiber bundle. The spectra were collected over the spectral range $400{\sim}1100nm$. Partial least squares regression(PLSR) was applied for a calibration and validation for determination of sugar contents. The multiple correlation coefficient was 0.99 and standard errors of calibration(SEC) was 0.069 brix. The calibration model predicted the sugar content for validation set with standard errors of prediction(SEP) of 0.092 brix. The sugar content in fruits was successfully quantified using the portable near infrared analyzer.

• Asian Journal of Atmospheric Environment
• /
• 제5권2호
• /
• pp.79-85
• /
• 2011

The purpose of this study is to evaluate the strength of the near-UV wavelength of 380 nm relative to visible and near-IR bands, and to find the suitable wavelength for detecting aerosols by using the Global Imager (GLI) sensor aboard the Advanced Earth Observing Satellite-II (ADEOS-II). Sensitivity analysis is performed for the retrieval of biomass burning aerosols by employing the radiative transfer model Rstar5b. It is determined that background surface reflectance in the blue band is similar to that in the near-UV band, and that wavelengths in the blue bands are more sensitive to the Aerosol Optical Thickness (AOT) than wavelengths in the near-UV band. The Total Ozone Mapping Spectrometer (TOMS) Aerosol Index (AI) is used in the indirect method used for aerosol retrieval, and the wavelength pair 380 nm and 460 nm is determined to be the most sensitive to the AOT. The results of this study suggest that wavelengths in the blue bands are suitable for detecting biomass burning aerosols over the Korean peninsula.