• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.73-81
• /
• 2012

PURPOSES : The purpose of this study is to select the proper sealing method and to see the performance of the saw and seal method for concrete rehabilitation based on accelerated pavement testings and lab tests. METHODS : Two accelerated pavement testings were conducted. One is to select proper sealing method of the asphalt joints and the other is to see the performance of the saw and seal method. Lab tests were conducted to select proper sealing method and a test section was constructed to see the field performance. RESULTS : The result of the first accelerated pavement testing indicated that the adhesive preformed sealants showed good performance when asphalt layer was rutted and in terms preventing from water infiltration. The second acceleration test indicated that the saw and seal method using the adhesive preformed sealant showed much better performance than the control. In the lab test bitumen, rubber and epoxy showed good performance as the adhesive. CONCLUSIONS : Saw and Seal method using the adhesive preformed sealant would markedly reduce the joint damage on the asphalt overlay.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.49-57
• /
• 2016

The high permeability-high strength concrete belongs to the typical of porous materials. It is mainly used in underground engineering for cold area, it can act the role of heat preservation, also to be the bailing and buffer layer. In order to establish a suitable model to predict the thermal conductivity and directly applied for engineering, according to the structure characteristics, the thermal conductivity predicting model was built by resistance network model of parallel three-phase medium. For the selected geometric and physical cell model, the thermal conductivity forecast model can be set up with aggregate particle size and mixture ratio directly. Comparing with the experimental data and classic model, the prediction model could reflect the mixture ratio intuitively. When the experimental and calculating data are contrasted, the value of experiment is slightly higher than predicting, and the average relative error is about 6.6%. If the material can be used in underground engineering instead by the commonly insulation material, it can achieve the basic requirements to be the heat insulation material as well.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.412-427
• /
• 2008

We propose ID-exchange protocol for Connectionless Location-Awareness Service (CLAS) to locate mobile nodes in indoor sensor network. When adapting location-awareness service to sensor network, the target system must be designed in accordance with various metrics which reflect the system requirement. We especially consider sustainability of the existing service which has been provided for its original purpose, such as environmental monitoring. The detailed meaning of sustainability here is that, even if location-awareness service is newly added to the existing service, the system must be assured to retain a stable network condition, and to deal with newly caused traffic properly. The CLAS ID-exchange protocol is especially designed for fixture and mobile nodes communication to achieve these properties. The protocol operates on 802.15.4 MAC layer to make mobile node work independently of the procedure to build routing table of fixture node, so a stable routing condition can be achieved even if there are many mobile nodes. Moreover, the dedicated frequency channel is assigned only for this protocol, so that traffic caused by location-awareness service can be distributed to another channel. A real system adapting the protocol was implemented to monitor fire and authorities' positions. We verified the overhead and elapsed time for location-awareness. The result shows the proposed protocol has a high performance in detecting speed, traffic distribution, and stability of overall network.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.332-335
• /
• 2007

본 논문에서는 버퍼를 이용한 가변적인 트래픽을 제어에서 영상의 품질 변화를 최소화 하는 방법을 제안한다. 제안하는 알고리즘은 반복적인 최적화 방법을 사용하지 않고 프레임 레이어에서 전송률을 제어하는 방법으로 영상 프레임간의 왜곡의 변화를 최소화한다. 그리고 버퍼의 정보를 비트율에 효과적으로 반영하기 위하여 제어 시스템에서 많이 사용되는 PID 제어를 하였다. PID 제어는 많은 계산량을 필요로 하지 않기 때문에 제안하는 알고리즘은 낮은 계산량을 필요로 하는 실시간 영상코덱에 적당한 알고리즘이다. 제안하는 알고리즘과 기존의 알고리즘간의 비교 실험은 제안하는 알고리즘이 PSNR 성능에서 기존의 알고리즘 보다 우수함을 보여준다.

• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.399-407
• /
• 1998

The infrared reflection coatings with pigment can be used to protect the surfaces of combustible materials exposed to fire. To obtain high reflectivities in the infrared range (0.5-10.mu.m) important to fire, several dielectric pigments, such as titanium dioxide, iron oxide, and silicon, can be synthesized to polymer coatings. The theoretical analysis shows that the coating design with particles diameter in the 1.5 to 2.5.mu.m range and volume fraction in the 0.1 to 0.2 range is estimated to be optimal. In the analysis of the radiation, the dependent scattering, absorption by polymeric binder, and the internal interface reflection are considered. In addition, the temperature distribution in the semi-transparent coating layer and an opaque substrate (PMMA) is also presented.

• 폴리머
• /
• 제30권2호
• /
• pp.182-186
• /
• 2006

CLC는 주기적인 나선구조 때문에 빛을 선택적으로 반사하는 특성을 보이는데, 반사 파장대역이 넓은 CLC를 광반응에 의한 상 분리 현상을 이용하여 제조하였다. CLC 액정 셀에 의하여 반사되는 빛의 파장은 노광하는 빛의 세기가 작을수록 그리고 UV 흡수 dye의 양이 증가할수록 범위가 증가하여 초기 50 nm의 반사 파장대역을 300 nm까지 넓힐 수 있었다. 광경화된 CLC 액정 셀 내에 상 분리에 의하여 형성된 다양한 CLC 피치 분포를 SEM으로 관찰하였고, ATR-IR 실험을 이용하여 CLC피치 분포가 넓어지는 것이 상 분리에 의한 것임을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.695-700
• /
• 2013

Thirty-eight radiation safety reports for brachytherapy equipment were evaluated to determine the current status of brachytherapy units in Korea and to assess how radiation oncology departments in Korea complete radiation safety reports. The following data was collected: radiation safety report publication year, brachytherapy unit manufacturer, type and activity of the source that was used, affiliation of the drafter, exposure rate constant, the treatment time used to calculate workload and the HVL values used to calculate shielding design goal values. A significant number of the reports (47.4%) included the personal information of the drafter. The treatment time estimates varied widely from 12 to 2,400 min/week. There was acceptable variation in the exposure rate constant values (ranging between 0.469 and 0.592 ($R{\cdot}m^2/Ci{\cdot}hr$), as well as in the HVLs of concrete, steel and lead for Iridium-192 sources that were used to calculate shielding design goal values. There is a need for standard guidelines for completing radiation safety reports that realistically reflect the current clinical situation of radiation oncology departments in Korea. The present study may be useful for formulating these guidelines.

• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2009-2014
• /
• 2007

본 논문에서는 버퍼를 이용한 가변적인 트래픽을 제어에서 영상의 품질 변화를 최소화 하는 방법을 제안한다. 제안하는 알고리즘은 반복적인 최적화 방법을 사용하지 않고 프레임 레이어에서 전송률을 제어하는 방법으로 영상 프레임간의 왜곡의 변화를 최소화한다. 그리고 버퍼의 정보를 비트율에 효과적으로 반영 하기 위하여 제어 시스템에서 많이 사용되는 PID 제어를 하였다. PID 제어는 많은 계산량을 필요로 하지 않기 때문에 제안하는 알고리즘은 낮은 계산량을 필요로 하는 실시간 영상 코덱에 적당한 알고리즘이다. 제안하는 알고리즘과 기존의 알고리즘간의 비교 실험은 제안하는 알고리즘이 PSNR 성능에서 기존의 알고리즘 보다 우수함을 보여준다.

• 한국IT서비스학회지
• /
• 제22권1호
• /
• pp.43-56
• /
• 2023

With the development of the e-commerce market, various types of products continue to be released. However, customers face an information overload problem in purchasing decision-making. Therefore, personalized recommendations have become an essential service in providing personalized products to customers. Recently, many studies on GCN-based recommender systems have been actively conducted. Such a methodology can address the limitation in disabling to effectively reflect the interaction between customer and product in the embedding process. However, previous studies mainly use implicit feedback data to conduct experiments. Although implicit feedback data improves the data scarcity problem, it cannot represent customers' preferences for specific products. Therefore, this study proposed a novel model combining explicit and implicit feedback to address such a limitation. This study treats the average ratings of customers and products as the features of customers and products and converts them into a high-dimensional feature vector. Then, this study combines ID embedding vectors and feature vectors in the embedding layer to learn the customer-product interaction effectively. To evaluate recommendation performance, this study used the MovieLens dataset to conduct various experiments. Experimental results showed the proposed model outperforms the state-of-the-art. Therefore, the proposed model in this study can provide an enhanced recommendation service for customers to address the information overload problem.

• 공업화학
• /
• 제3권4호
• /
• pp.730-738
• /
• 1992

혐기성 소화액의 한외여과에 의한 후처리에서 분리막의 재질에 따른 여과특성을 연구하였다. 상이한 분리막의 여과특성을 정량적으로 평가하기 위해 저항 모델을 이용하였다. 소화액에 대한 플럭스의 양태는 초기의 물에 대한 분리막의 투과도에 무관하게 나타났다. 플루오로 폴리머 막의 경우에 유속의 증가에 따라 큰 플럭스의 향상을 보였는데 이것은 다른 분리막에 비해 막표면에 형성된 케이크층의부착성이 약해 쉽게 제거될 수 있음을 시사해준다. 장시간 운전에서 플럭스의 감소는 오염층 저항의 증가에서 뿐만아니라 분극층 저항의 증가에서도 기인되었는데, 이와같은 계속적인 분극층 저항의 증가는 미생물의 분해 및 성장에 따른 케이크층 내의 성상변화를 반영할 수 있다. 막표면이 친수성인 셀룰로오즈 막은 소수성인 폴리술폰 막에 비해 낮은 막오염도를 보여주었다. 감압을 통해 플럭스를 $5-10L/m^2/h$회복시킬 수 있었다. 세척단계에서 여과저항을 평가함으로써 15분의 단시간내에 세척이 완료됨을 알 수 있었다.