• Journal of Korea Foundry Society
• /
• v.15 no.2
• /
• pp.175-183
• /
• 1995

It is difficult to remove such interstitial impurities as sulfur, oxygen, hydrogen and carbon in Fe-Ni alloys. Thermodynamic and kinetic studies were carried out on the behavior of hydrogen gas, oxygen gas, Si, Al and slag, and the reaction time by the $Ar/Ar-H_2$ plasma and electron beam melting. After the addition of Al, Si, they were melted by Ar plasma with reaction time changed. 80%Ni-Fe alloys showed a better deoxidation than 36%Ni-Fe alloys. At $Ar-H_2$ plasma melting, the deoxidation was significant. In the case of the electron beam melting, the residual oxygen was higher than in Ar plasma melting because electron beam melting temperature was lower than that of Ar plasma. For the decaburization, it was melted by $Ar-O_2$ plasma melting, which could remove effectively carbon by activated oxygen in plasma. We added slag to Fe-Ni alloys for the desulfurization. As the result of this experiments, the amount of residual sulfur was not changed according to the slag ratio and reaction time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.687-693
• /
• 2006

Image co-registration is the process of overlaying two images of the same scene, one of which represents a reference image, while the other is geometrically transformed to the one. In order to improve efficiency and effectiveness of the co-registration approach, the author proposed a pre-qualified area matching algorithm which is composed of feature extraction with canny operator and area matching algorithm with cross correlation coefficient. For refining matching points, outlier detection using studentized residual was used and iteratively removes outliers at the level of three standard deviation. Throughout the pre-qualification and the refining processes, the computation time was significantly improved and the registration accuracy is enhanced. A prototype of the proposed algorithm was implemented and the performance test of 3 Landsat images of Korea. showed: (1) average RMSE error of the approach was 0.435 pixel; (2) the average number of matching points was over 25,573; (3) the average processing time was 4.2 min per image with a regular workstation equipped with a 3 GHz Intel Pentium 4 CPU and 1 Gbytes Ram. The proposed approach achieved robustness, full automation, and time efficiency.

• Proceedings of the KSPS conference
• /
• 2002.11a
• /
• pp.187-190
• /
• 2002

In this paper, a speech enhancement system using microphone array with MMSE-STSA (Minimum Mean Square Error-Short Time Spectral Amplitude) estimator based post-processing is proposed. Speech enhancement is first carried out by conventional delay-and-sum beamforming (DSB). A new MMSE-STSA estimator is then obtained by refining MMSE-STSA estimators from each microphone, which is applied to the output of conventional DSB to obtain additional speech enhancement. Computer simulation for white and pink noises show that the proposed system is superior to other approaches.

• Carbon letters
• /
• v.4 no.2
• /
• pp.79-85
• /
• 2003

MCMB (mesocarbon microbeads) has been synthesized from coal tar pitch, petroleum pitch and polymer compound generally. But yield of MCMB was low about 20~40 wt% and was not above 50 wt%. Neither MCMB was replaced with natural graphite because of economic performance, refining MCMB, and control of the particle size distribution. This study was performed to elevate yield of MCMB and to develop technique of particle size distribution. As the result, yield of MCMB that was synthesized from coal tar pitch increased more than 60 wt% about raw material and particle size of MCMB was restrained according to control of QI (quinoline insoluble) ingredient in raw pitch, heat treatment temperature and time.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.97-105
• /
• 1997

Mo-99(Molybdenum) is the only source of Tc-99m(Technetium) which is most frequently used in nuclear medical diagnostics and the demand is on the increase recently. Separation and refining of Mo-99 was investigated by adsorption and desorption on alumina. At pH=0.63, adsorption isotherm of Mo was fitted by Redlich ＆ Peterson equation using the adsorption experimental data. It was found that the pore diffusion model ($D_p=1.4{\times}10^{-6}cm^2/s, K_f/=0.4 cm/s$) agreed well with batch adsorption experimental data. RTDs(Residence Time Distributions ) were measured and axial dispersion coefficients were obtained in the fixed bed absorber according to the changes of the flow rate using 0.05% -NaCl. From the adsorption experimental data, it was shown that the behavior of breakthroughs depended on flow rate. Mo recovery yield was increased as adsorption flow rate was increased and desorption flow rate was decreased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.88-94
• /
• 2010

Cattail (Typha L.) was used as a raw material for producing both bio-ethanol and pulp for papermaking at the same time. Pretreatments of cattail stems and leaves with acid ($H_2SO_4$) and alkali (NaOH) in three different addition levels were studied before soda pulping. The acid pretreatment gave reducing sugar of 15.2% of initial weight, but alkali pretreatment close to 1%. Soda pulping of the pretreated cattail gave 3% reduction in pulp yield and less bonding properties in paper; however, refining of the pulp from the pretreated cattail with alkali restored their fiber bondings up to that of the pulp from no-pretreated cattail at equivalent freeness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.9
• /
• pp.779-784
• /
• 2004

This paper describes a sonic polygonal multiple reflection range sensor (SPMRS), which uses multiple reflection properties usually ignored in ultrasonic sensors as disturbances or noises. Targets such as a plane, corner, edge, or cylinder in indoor environments can easily be detected by the multiple reflection patterns obtained with a SPMRS system. Target classification and feature data extraction, such as distance and azimuth to the target, are computed simultaneously by considering the geometrical relationships between the detected targets, and finally the environment model is generated by refining the detected targets. In addition, the narrow field of view of a sonar range sensor is increased and the scanning time is reduced by active motion of the SPMRS stepping servomechanism.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.48-53
• /
• 2003

The steel slag, a by-product which is produced on the process of manufacturing steel by refining pig iron is mainly used as road materials after aging it. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the volume expanded. Due to this reason it prevents steel slag from being used as aggregate of concrete. But steel slag used in this study is controled by a air-jet method which rapidly cools substance melted at a high temperature. Rapid cooling prevents from generating of free-CaO in steel slag. In this study, it was investigated that steel slag manufactured by air-jet method affects on concrete in the freezing and thawing. As results of this study, concrete mixed with steel slag was worse in the freezing and thawing than concrete mixed with sand in spite of using air entraining agent. To obtain durability of concrete in the freezing and thawing, it is desirable to mix 50% of steel slag in concrete per unit weight of volume.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.552-557
• /
• 2001

Copper slag is the by-producted material on the proceeding of refining the copper. To verify applications of copper slag to vertical drain material can substitute for the sands in ground improvement, laboratory soil tests and consolidation model tests were conducted. The results of consolidation model test was analyzed as the hyperbolic method. The hyperbolic method assumes that the settlement(s) versus time(t) behavior approaches a straight line describes a hyperbolic reaction. The inverse of the slope of the line would then yield the ultimate settlement. Through in this study, copper slag is compatible with vertical drain material as like sands. Copper slag compaction pile promote the consolidation settlement.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.153-159
• /
• 2006

Red algae were used to make bleached pulp, from which paper handsheet samples were made. Red algae consists of rhizoidal filaments, epidermal tissues whose color were reddish, mucous carbohydrates, and other minor elements. Rhizoidal filaments of high brightness were obtained after extracting out mucous carbohydrates, and bleaching the remainder by using bleaching chemicals. The sizes and shapes of several rhizoidal filaments (or red algae pulp) from different red algae species were examined, and their handsheet properties were compared. Transparent and transluscent high density paper samples were made without applying refining process from the red algae pulp. White paper samples with good printability and excellent formation were made. We are developing pilot scale pulping and papermaking facilities at this time.