• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.373-381
• /
• 2002

There has been an interesting trend showing that the number of tankers owned by major oil company has been decreasing since the 1980s, while the number of tankers chartered by them is increasing. So do Korea oil refineries in the period 1990s. Therefore, the following question is raised： Why have oil refinery companies, national and international, been much more dependent upon chartered ships than their owned ships since 1980s\ulcorner This paper tried to answer the above question. In so, doing ten decision-making factors for fleet composition of oil tankers are drawn through literature survey on the research topic with questionnaires and interviews to the four big Korean oil refineries.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.469-473
• /
• 1998

The gasoline brands can be determined by gas chromatography. However, determining from the differences in chromatograms is sometimes ambiguous because the gasoline composition is becoming similar from refinery to refinery due to stringent regulations for the protection of the atmospheric environment. To determine the gasoline brands of five refineries in Korea, we have obtained and compared IR spectra of polymeric dispersants which are added to gasoline at several hundreds of ppm levels. Since the deposit control additives used by the five refineries in Korea are different from one another, it is possible to determine the gasoline brands by comparing their IR spectra. A strong and broad C-O stretch absorption peak appears at $1,096cm^{-1}$ for the additives used by A, B, and C refineries, which renders an easy differentiation of the additives from those of D and E refineries. The differentiation of all five gasoline brands are possible due to the characteristic vibrations present in each additive.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.35-40
• /
• 2008

A distillation tower is one of the important facilities which separates and refines a crude oil stream according to certain boiling points. Its operation efficiency can affect the productivity of a refinery substantially. The objective of this study is to elucidate some operational information on the internal conditions of a distillation tower from a measurement of density profile by using a sealed gamma-ray source and a radiation detector. Gamma radiation counts were measured by a BGO detector positioned diametrically outside the tower-wall, opposite to the gamma source(Co-60) as the detector and the source were lowered concurrently. From the results, structural abnormality of the trays was not found inside the tower. Considering the flow distribution patterns, however, a vapor phase was dominantly formed at the upper part of the tower and a liquid phase at the lower part. From the gamma scanning of the distillation tower, it is anticipated that the gamma absorption technique can be used as an important tool for confirming the structural soundness of trays and investigating flow distribution in refinery facilities.

• Journal of the Economic Geographical Society of Korea
• /
• v.23 no.1
• /
• pp.93-109
• /
• 2020

The purpose of this study is to examine the effects of industrialization and urbanization of Gwangyang Bay Region on the change of urban system and spatial structure between triangle-cities located in Gwangyang Bay, Yeosu City, Suncheon City, and Gwangyang City, one of the famous industrial zones in Korea. Large-scale development projects carried out by the central government in the Gwangyang Bay Region such as construction of the Second Oil Refinery in the mid-1960s, completion of the POSCO Gwangyang Steelworks in the mid-1980s, construction of the Gwangyang Port Container Terminal in 1987 and designation of the Gwangyang Bay Area Free Economic Zone in 2003, and EXPO 2012 Yeosu Korea, affected to changes of the urban system and spatial structure between triangle-cities in Gwangyang Bay Region. The above four-development projects transformed the urban and spatial structures between the three cities in the Gwangyang Bay Region from a mononuclear urban system centered on Suncheon to a network city system. Historically, Suncheon has served as an exclusive center in the eastern region of Jeonnam, including the Gwangyang Bay Region. However, the hosting of the 2012 Yeosu Expo Korea is reorganizing the three cities into a network-type spatial structure with the strengthening of connectivity and integration in the region. And this trend is expected to intensify in the future.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.570-576
• /
• 2001

Thermophilic aerobic bacteria were applied in the degradation of industrial waste activated sludge (WAS) on a laboratory scale expreiment. The performance of digestion was estimated by measuring the reduction of total suspended solids (TSS), dissolved organic carbon (DOC), and total organic carbon (TOC). Among three strains of Bacillus stearothermophilus and three strains of Thermus species, B. stearothemophilus ATCC 31197 showed the best overall efficiency level for the degradation of industrial WAS, which was collected from a wastewater treatment plant in an oil refinery factory. Industrial WAS coul be successfully detraded in a batch digestion with ATCC 31197. The stability of the digestion process with ATCC 31197 was successfully verified by semi-continuous (fill-and-draw) digestion experiment. From the results of this study, it was shown that the thermophilic aerobic digestion process with ATCC 31197 could efficiently be applied to the degradation of industrial WAS.

• Wind and Structures
• /
• v.18 no.2
• /
• pp.181-194
• /
• 2014

A major problem with high-mast light poles is the effects that wind vortex shedding can have on the pole itself because of the lock-in phenomenon. It is desired that the coefficients in the AASHTO Standard Specifications ($5^{th}$ edition) for Structural Supports for Highway Signs, Luminaries, and Traffic Signals be analyzed and refined. This is for the belief that the span of the shapes of poles for which the coefficients are used is much too broad and a specific coefficient for each different shape is desired. The primary objective of this study is to develop wind vortex shedding coefficient for a multisided shape. To do that, an octagonal shape was used as the main focus since octagonal cross sectioned high-mast light poles are one of the most common shapes in service. For the needed data, many wind parameters, such as the static drag coefficient, the slope of aerodynamic lift coefficient, Strouhal number, the lock-in range of wind velocities producing vibrations, and variation of amplitude of vortex-induced vibration with Scruton number are needed. From wind tunnel experiments, aerodynamic parameters were obtained for an octagonal shape structure. Even though aerodynamic coefficients are known from past test results, they need to be refined by conducting further wind tunnel tests.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.1-5
• /
• 2020

The leakage accident from a storage tank in an oil refinery plant occurred in April 2014 and the total loss is KRW 18 billion. This accident has prompted many companies to develop their own mitigation system to minimize the loss of the leakage accident. The aim of this study is to design the temporary storage facility system for dealing with leakage accidents. The basic concept of this system is that the leakage fluid of a hazardous material flows into a temporary storage tank and this is transferred to a spare tank by a pump as avoiding the overflow of a temporary storage tank. In order to design this system, the leakage velocity and quantity according to time series should be evaluated. In addition, a proper pump capacity should be determined to avoid repeating the pump switching on and off frequently. In this study, the benzene tank is selected to verify the efficacy of this system. This study can play a critical role to provide a guideline for designing a new system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.90-97
• /
• 2006

Hydrogen is used as a chemical feedstock in several important industrial processes, including oil refineries and petro-chemical production. But, nowadays hydrogen is focused as energy carrier on the rising of problems such as exhaustion of fossil fuel and environmental pollution. Thermochemical hydrogen production by nuclear energy has potential to efficiently produce large quantities of hydrogen without producing greenhouse gases, and research of nuclear hydrogen, therefore, has been worked with goal to demonstrate commercial production in 2020. The oil refineries and petro-chemical plant are very large, centralized producers and users of industrial hydrogen, and high-potential early market for hydrogen produced by nuclear energy. Therefore, it is essential to investigate and analyze for state of domestic hydrogen market focused on industrial users. Hydrogen market of petro-chemical industry as demand site was investigated and worked for demand forecast of hydrogen in 2020. Also we suggested possible supply plans of nuclear hydrogen considered regional characteristics and then it can be provided basis for determination of optimal capacity of nuclear hydrogen plant in 2020.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.3
• /
• pp.94-106
• /
• 1986

Since the oil shock of '70s the engine makers have developed new types of diesel engine with low fuel consumption. There is an obvious tendency towards the use of poorer quality fuels, such as the residual oil from chemical processes of refinery. The shaft driving generators is also widely adopted on behalf of the auxiliary diesel engines, which are driving on the expensive diesel oil and have high fuel oil consumption rates, and some mania propulsion diesel engines are equipped with reduction gear systems to get better propulsive efficiency by slower propeller revolutions. The propulsion shafting system equipped with the shaft driving generator or the geared diesel engine shafting system has flexible couplings, and it requires extensive investigations of the torsional vibration and torque fluctuation in order to ensure the acceptable operation range in service. The characteristics of misfiring must be especially examined for the high viscosity fuels to be used. Both torsional vibration and fluctuating torque resulted from misfiring, should be examined for thier effects on the flexible coupling and propulsion shafting system. This paper is to investigate and solve the above mentioned problems which must be predicted on the design-stage of marine propulsion shafting system. A computer program is developed to calculate the indicated diagram, fluctating torque and torsional vibration for both normal and misfiring conditions.

• Economic and Environmental Geology
• /
• v.3 no.3
• /
• pp.141-161
• /
• 1970

The outline of general trend on production, consumption and price of non-ferrous metals during 1969 is summerized in the paper. The production of every non-ferrous metals has increased compare to that of last year, and their consumption except silver has also increased. Specially the rate of growth of production is that; The rate of growth of consumption is such; The prices of gold and silver have decreased since last November due to the stability of international currency and the creation of S.D.R. at I.M.F., but those of other metals have increased, marking the price at the end of 1969 as follows: Cupper price of Foreign Refinery showed ¢72.471/lb(increased 39% per year), lead and Zinc jumped up to the highest price since the Korean War (1951-1953), showing the lead price ¢16.50/lb (increased 27% per year) and the zinc price ¢15.50/lb (increased 15% per year). Price of tungsten was higher than the agreed price that was made between Korea and U.S.A. during 1951 through 1954, showing $63.4/S.T.U. (increased 13% per year). The price of molybdenum was slightly increased from $1.62 to $1.72 (increased 6% per year). In summing up, the year of 1969 was the golden age for the nonferrous metals. It is, hawever, expected that in the next few years, the consumption rate and the prices of non-ferrous metals will be declined compared to those of 1969.