• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1465-1471
• /
• 2002

This paper deals with the development of a new method that can obtain the heat transfer coefficient and the reference free stream temperature simultaneously. The method is experimentally verified through comparison with results in convective heat transfer experiments of a circular impinging jet using two narrow-band TLCs. The general method described in this paper is highly recommended to many heat transfer models with the unknown or ambiguous free stream temperature.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1707-1714
• /
• 2002

This paper deals with the development of a new method that can obtain heat transfer coefficient and reference free stream temperature simultaneously, The method is based on transient heat transfer experiments using two narrow-band TLCs. The method is validated through error analysis in terms of the random uncertainties in the measured temperatures. It is found that the errors could be reduced more than 2 times less. The general method described in this paper is applicable to many heat transfer models with unknown free stream temperature.

• 한국자기학회지
• /
• 제21권4호
• /
• pp.121-126
• /
• 2011

자유층과 고정 기준층으로 이루어진 자기 터널 접합의 스핀 동역학을 강자성 공명 시늉내기로 연구 하였다. 먼저 교환 바이어스 인위적 준강자성 기준층을 포함한 자기 터널 접합에서 DC 자기장에 대한 각 층의 자화 방향을 확인하고 터널 자기저항을 계산하였다. 자기 터널 접합에서 스핀의 들뜸 모드들을 확인하기 위해 DC와 RF 자기장을 함께 인가하여 강자성 공명 주파수 스펙트라를 관찰 하였다. 각 층 별로 들뜸 모드들을 확인하여 자유층과 기준층의 자화 방향의 차이로 계산된 터널 자기저항의 들뜸 모드들을 분석 하였다. 전체적으로 스핀의 들뜸 모드는 자유층이나 기준층의 자화 방향에 관련해서 DC 자기장의 음, 양의 방향에 따라 상이하게 나타났다. 음의 방향 자기장에 대해서 자유층과 기준층의 강자성 공명 주파수 스펙트라는 수정된 Kittel 방정식으로 잘 설명되지만 양의 방향 자기장에 대해서는 예측하기 어려운 들뜸 모드들로 인해 분석적 해답을 찾기 어려웠다. 자기터널 접합의 강자성 층들은 서로 상호 작용을 하기 때문에 이에 대한 스핀 동역학 연구는 자유층 뿐만 아니라 기준층, 고정층과도 밀접하게 연관되어 있다.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.337-344
• /
• 2014

While implicit integration methods such as Newton's method have excellent stability for the analysis of stiff and constrained mechanical systems, they have the drawback that the evaluation and LU-factorization of the system Jacobian matrix required at every time step are time-consuming. This paper proposes a Jacobian update-free Newton's method in order to overcome these defects. Because the motions of all bodies in a vehicle model are limited with respect to the chassis body, the equations are formulated with respect to the moving chassis-body reference frame instead of the fixed inertial reference frame. This makes the system Jacobian remain nearly constant, and thus allows the Newton's method to be free from the Jacobian update. Consequently, the proposed method significantly decreases the computational cost of the vehicle dynamic simulation. This paper provides detailed generalized formulation procedures for the equations of motion, constraint equations, and generalized forces of the proposed method.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권3호
• /
• pp.237-244
• /
• 2024

An Attitude and Heading Reference System (AHRS) provides the attitude of a vehicle with a constant velocity using an Inertial Measurement Unit (IMU) and a magnetometer. In this case, in order to avoid the disadvantage of a gyroscope, an AHRS using a Gyro-Free IMU (GF-IMU) that is composed of only accelerometers may be considered instead of the gyroscopes. In this paper, a design method of an AHRS using a GF-IMU is proposed. The proposed AHRS consists of roll and pitch calculation, yaw calculation, angular acceleration and angular velocity calculation, attitude calculation, and a Kalman filter. In particular, since the angular velocity cannot be measured from a gyroscope, the angular acceleration is obtained from the accelerometer output, and the angular velocity is calculated by integrating it. In order to show the usefulness of the proposed method, a performance evaluation was carried out. The performance evaluation results show that the attitude estimation performance of the proposed AHRS is similar to that of the conventional AHRS.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.419-424
• /
• 2001

This paper deals with the development of a new method that can obtain heat transfer coefficient and reference tree stream temperature simultaneously. The method is based on transient heat transfer experiments using two narrow-band TLCs. The method is validated through error analysis in terms of the random uncertainties in the measured temperatures. It is shown how the uncertainties in heat transfer coefficient and tree stream temperature can be reduced. The general method described in this paper is applicable to many heat transfer models with unknown free stream temperature.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.168-178
• /
• 2019

Discrete space vector modulation (DSVM) is an effective method to improve the steady-state performance of the finite control set predictive control for permanent magnet synchronous motor drive systems. However, it requires complex computations due to the presence of numerous virtual voltage vectors. This paper proposes an improved finite control set model-free predictive control using DSVM to reduce the computational burden. First, model-free deadbeat current control is used to generate the reference voltage vector. Then, based on the principle that the voltage vector closest to the reference voltage vector minimizes the cost function, the optimal voltage vector is obtained in an effective way which avoids evaluation of the cost function. Additionally, in order to implement double-objective control, a two-level decisional cost function is designed to sequentially reduce the stator currents tracking error and the inverter switching frequency. The effectiveness of the proposed control is validated based on experimental tests.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.99-105
• /
• 1996

Increasing demands on precision machining of free-form surfaces have necessitated the tool to move not only with position error as small as possible, but also with smoothly varying feedrates. In this paper, linear, circular and spline interpolators were developed in reference-pulse type using PC. M-SAM and M-DAM were designed by the comparison and analysis of previous interpolation methods. Spline interpolator was designed to follow the free-form curves. To apply to the real cutting process, constant feedrate compensation and acceleration-deceleration compensation were conceived. Finally, its performance was tested using retrofitted milling machine. As a result, new interpolation algorithm is favorable in precision machining of free-form curves.

• Bulletin of the Korean Chemical Society
• /
• 제20권7호
• /
• pp.815-818
• /
• 1999

The method of calculating the excess Helmholtz free energy from the averaged effective acceptance ratio for the Lennard-Jones fluid and the inverse twelve fluid has been slightly modified and applied to the two-center-Lennard-Jones liquid. The excess Helmholtz free energy is calculated directly from the average of the modified effective acceptance ratio through a single Metropolis Monte Carlo simulation. Therefore this method does not need any reference system. The results of the present method were satisfactory compared with those of the perturbation theories and the overlap ratio method.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.9-13
• /
• 2006

In the present study, a numerical analysis of transient mixer flow is performed considering free surface formation. The flow patterns and free surface shape in a mixers formed by flat paddle and pitched paddle impellers are predicted. In a flat paddle mixer, two flow circulation regions are formed due to strong radial flow, whereas one large circulation is formed in a pitched paddle mixer due to axial downward flow. These differences affect the free surface evolution and shape. It is seen from the results that a flat paddle mixer gives deeper free surface at center region than a pitched paddle mixer. The free surface of 8-blades-flat-paddle mixer is also simulated to compare with the available experimental and simulation results. The present computational results agree reasonably well with the experimental data.