• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2232-2235
• /
• 2003

In speech communication systems where two different speech codecs are interoperated, transcoding algorithm is a good approach because of its low complexity and improved synthesized speech quality. This paper proposes an efficient method to further improve the performance of transcoding algorithms as well as to reduce the complexity. In the conventional transcoding algorithms. a post-filter and a perceptual weighting filter should be operated sequentially because both decoding and encoding processes are needed. This results in the redundancy of the processing in terms of complexity and perceptual quality. Using the fact that their filter structures are similar, we replaced the two filters with one. The proposed algorithm requires 72.8% lower complexity than the conventional transcoding algorithm when we compare only the complexity of the filtering processes. The results of both objective and subjective tests verify that the proposed algorithm has slightly better quality than the conventional one.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2014년도 추계학술대회
• /
• pp.180-181
• /
• 2014

현재 HEVC의 AMVP(Adaptive Motion Vector Prediction) 모드에서는 공간적, 시간적 후보를 고려하여 최종 후보 2개를 결정 한 후 어떤 후보를 사용하였는지 MVP flag를 이용하여 디코더로 알려준다. 이때, 최종 2개의 후보가 동일하다면 AMVP의 성능이 저하 될 수 있다. 따라서 본 논문에서는 그러한 경우를 고려하여 개선된 알고리즘을 제안한다. 실험결과는 휘도 기준 최대 -0.5%의 성능이 나오며 제안된 알고리즘이 효율적임을 보여준다.

• 방송공학회논문지
• /
• 제7권4호
• /
• pp.291-299
• /
• 2002

본 논문은 밝기 변화가 심한 비디오 시퀀스에 대해 효율적인 움직임 보상 알고리즘을 제안한다 제안한 알고리즘에서는 화면간의 밝기 변화 변수들을 추정하고 지역적인 움직임 보상을 수행한다. 밝기 변화가 심한 화면을 검출하기 위해 화면간의 히스토그램의 크로스 엔트로피를 계산하여 밝기 변화가 심한 화면을 그렇지 않은 화면과 나누어 불필요한 계산량을 줄였다. 밝기 변화가 심한 비디오 시퀀스에 대한 실험결과 제안한 알고리즘은 기존의 알고리즘에 비해 적은 계산량으로 높은 PSNR (peak signal to noise ratio) 성능을 나타내었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.88-88
• /
• 2000

As more and more critical commercial applications move on the Internet, providing highly available servers becomes increasingly important. One of the advantages of a clustered system is that it has hardware and software redundancy. High availability can be provided by detecting node or daemon failure and reconfiguring the system appropriately so that the workload can be taken over bi the remaining nodes in the cluster. This paper presents how to provide the guaranteeing high availability of clustering web server. The load balancer becomes a single failure point of the whole system. In order to prevent the failure of the load balancer, we setup a backup server using heartbeat, fake, mon, and checkpointing fault-tolerance method. For high availability of file servers in the cluster, we setup coda file system. Coda is a advanced network fault-tolerance distributed file system.

• 인터넷정보학회논문지
• /
• 제8권4호
• /
• pp.71-79
• /
• 2007

무선 센서 네트워크에서 통신 행위는 라우팅과 브로드캐스팅의 두 가지 형태로 특징지어질 수 있으며, 이중 브로드캐스팅은 효과적인 경로 탐색 및 패킷 전달을 위해 사용된다. 그러나 브로드캐스팅은 패킷의 중복 전달로 인한 에너지의 과소비로 네트워크의 수명을 단축시킨다. 본 논문에서는 2-hop 이웃노드 정보를 이용하는 Dominant Pruning 방식을 기반으로 중복된 포워드 노드를 제거하는 알고리즘을 제안한다. 제안한 알고리즘이 포워드 노드 수 및 네트워크 수명 면에서 우수한 성능을 나타냄을 시뮬레이션을 통해 입증하였다.

• 융합신호처리학회논문지
• /
• 제14권4호
• /
• pp.231-234
• /
• 2013

This paper introduces a mixture of background subtraction technique and K-Means clustering algorithm for removing shadows from video sequences. Lighting conditions cause an issue with segmentation. The proposed method can successfully eradicate artifacts associated with lighting changes such as highlight and reflection, and cast shadows of moving object from segmentation. In this paper, K-Means clustering algorithm is applied to the foreground, which is initially fragmented by background subtraction technique. The estimated shadow region is then superimposed on the background to eliminate the effects that cause redundancy in object detection. Simulation results depict that the proposed approach is capable of removing shadows and reflections from moving objects with an accuracy of more than 95% in every cases considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.506-509
• /
• 1988

This paper describes an effective knowledge acquisition method in the fault diagnosis expert system for the electronic switching system TDX-1A. The knowledge acquisition procedure consists of the knowledge collection, the fault diagnosis modeling and the knowledge representation. Furthermore, to improve the performance of the knowledge bases with rule and frame representation, we showed the knowledge base checking methodlogy by using redundancy and inconsistency check algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.461-464
• /
• 1988

In order to use mBIZ code as the practical transmission code, the information block length have to be determined. If the information block length is short, timing information disapperance is reduced, but transmission speed is increased as the result of inserted redundancy bit. While, if the information block length is long, timing information disapperance and jitter are caused. So it is very important to determine the optimal timing information block length. Therefore, in this paper, we determined the optimal information block length using S/X endurance method.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.193-200
• /
• 1997

Current seismic design code is based of the assumption that the designed structures would be behaved inelastically during a severe earthquake ground motion. For this reason, seismic design forces calculated by seismic codes are much lower than the forces generated by design earthquakes which makes structures responding elastically. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factors known as "response modificaion factor". Because these factors were determined empirically, it is difficult to know how much inelastic behaviors of the structures exhibit. In this study, base shear forces required to maintain target ductility ratio were first calculated from nonlinear dynamic analysis on the single degree of freedom system. And then, base shear foeces specified in seismic design code compare with above results. If the strength(base shear) required strength should be filled by overstrength and/or redundancy. Therefore, overstrength of moment resisting frame structure will be estimated from the results of static nonlinear analysis(push-over analysis).analysis).

• Computational Structural Engineering : An International Journal
• /
• 제2권1호
• /
• pp.11-17
• /
• 2002

Cost-effectiveness in design is considered for determining the target reliability of concrete bridges under seismic actions. This objective can be achieved based on the economic optimization of the expected life-cycle cost of a bridge, which includes initial cost, direct losses, and indirect losses of a bridge due to strong earthquakes over its lifetime. A separating factor is defined to consider the redundancy of a transportation network. The Park-Ang damage model is employed to define the damage of a bridge under seismic action, and a Monte Carlo method based on the DRAIN-2DX program is developed to assess the failure probability of a bridge. The results for an example bridge analyzed in this paper show that the optimal target failure probability depends on the traffic volume carried by the bridge and is between 1.0×10/sup -3/ to 3.0×10/sup -3/ over a life of 50 years.