• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.3
• /
• pp.379-383
• /
• 1996

To evaluate the methanol extract from Pinus strobus leave as a possible ingredient of health food, the sensory analysis and an animal experiment were designed using cookie, candy or chewing gum containing the methanol extract. Cookie, candy and chewing gum which contained 0.4%, 0.25% and 0.3% of the methanol extract, respectively, were prepared by Haitai Confectionary CO.. Sensory analysis of the products was evaluated by hedonic scale. Our results indicated that the addition of the methanol extract to the products provides better sensory perception in hedonic score and higher preference number than control, especially in candy and cookie. In the animal experiment, the chickens fed diet containing 10% of the cookie powder for 2 weeks exhibited a reduction of the serum cholesterol level by 18%, compared with the chickens fed basal diet. This result suggested that the methanol extract from P. strobus leave contained a potential ingredient to reduce the concentration of serum cholesterol. Therefore, extract from Pinus strobus leaves can be used as an ingredient of health food.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2012

Purpose: In the present study, the degree of subjective pain in chronic low back pain patients through the course of six week of yoga low back pain exercise and lumbar extensor muscle strengthening training was analyzed, and a systematic and effective home exercise therapy program was proposed. Methods: For this study, we sampled 21 random patients with chronic low back pain who were receiving outpatient treatment at G Hospital Pusan, and conducted experiment for six weeks by applying yoga low back pain exercise+modalities (7) lumbar extensor muscle endurance exercise+ modalities (7) and modalities (7). To measure the degree of pain, the visual analogue scale (VAS) and Oswestry Low Back Pain Questionnaire were used. Pain was measured before the experiment and after six weeks. Results: Significant differences were observed between yoga, extensor muscle endurance exercise and modalities (VAS=0.00 Oswestry=0.00). The yoga and extensor endurance muscle exercise reduced low back pain by more than the modalities. Conclusion: This study will be used to develop a preventive and reduction method of LBP. Therefore, Yoga and extensor muscle endurance exercise are appropriate for use as a home program exercise to reduce low back pain in patients.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.117-126
• /
• 2015

Reductive degradation of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) by nanoscale zero-valent iron (nZVI) was investigated to evaluate the feasibility of using it for in-situ groundwater remediation. Batch experiments were conducted to quantify the kinetics and efficiency of RDX removal by nZVI, and to determine the effects of pH, dissolved oxygen (DO), and ionic strength on this process. Experimental results showed that the reduction of RDX by nZVI followed pseudo-first order kinetics with the observed rate constant (k_obs) in the range of 0.0056-0.0192 min⁻¹. Column tests were conducted to quantify the removal of RDX by nZVI under real groundwater conditions and evaluate the potential efficacy of nZVI for this purpose in real conditions. In column experiment, RDX removal capacity of nZVI was determined to be 82,500 mg/kg nZVI. pH, oxidation-reduction potential (ORP), and DO concentration varied significantly during the column experiments; the occurrence of these changes suggests that monitoring these quantities may be useful in evaluation of the reactivity of nZVI, because the most critical mechanisms for RDX removal are based on the chemical reduction reactions. These results revealed that nZVI can significantly degrade RDX and that use of nZVI could be an effective method for in-situ remediation of RDX-contaminated groundwater.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.4
• /
• pp.47-60
• /
• 1999

The stability and efficiency of structural control systems depend on the accuracy of mathematical model of the system to be controlled. In this study, state equation models of a small scale test structure and an AMD(active mass damper) are obtained separately using OKID(observer/Kalman filter identification) which is a time domain system identification method. The test structure with each floor acceleration as outputs is identified for two inputs - the ground acceleration and the acceleration of the moving mass of AMD relative to the installation floor - individually and the two identified state equation models are integrated into one by model reduction method. The AMD is identified with the motor control signal as an input and the relative acceleration of the moving mass as an output, and it is shown that the identified model has large damping ratio and phase shift. The transfer functions and the time histories reconstructed from the identified models of the test model and the AMD match well with those measured from the experiment.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.41-48
• /
• 2002

This study is on the structural control experiment for a small scale three-story building structure employing on active mass damper subjected to earthquake loading. $\mu$-synthesis controllers, which belong to robust control strategies, were designed and their performance were experimentally verified. Frequency-dependent weighting functions corresponding to disturbance input and controlled output were defined and combined to produce optimal $\mu$-synthesis controllers. The experiment result shows 60-70% reduction in RMS responses under the band-limited white noise excitation and 30-45% reduction in peak responses under the scaled earthquake excitations. Good agreement was obtained between the simulations based on the identified mathematical model and experimental results. And the simulations for the system with uncertainties show that the designed controllers are robust within a specified range of uncertainties.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.73-82
• /
• 2015

This paper proposes an ripple reduction algorithm and analyzes the effects of offset and scale errors generated by voltage sensor while measuring grid voltage in grid-tied single-phase inverters. Generally, the grid-connected inverter needs to detect the phase angle information by measuring grid voltage for synchronization, so that the single-phase inverter can be accurately driven based on estimated phase angle information. However, offset and scale errors are inevitably generated owing to the non-linear characteristics of voltage sensor and these errors affect that the phase angle includes 1st harmonic component under using SRF-PLL(Synchronous Reference Frame - Phase Locked Loop) system for detecting grid phase angle. Also, the performance of the overall system is degraded from the distorted phase angle including the specific harmonic component. As a result, in this paper, offset and scale error due to the voltage sensor in single-phase grid connected inverter under SRF-PLL is analyzed in detail and proportional resonant controller is used to reduce the ripples caused by the offset error. Especially, the integrator output of PI(Proportional Integral) controller in SRF-PLL is selected as an input signal of the proportional resonant controller. Simulation and experiment are performed to verify the effectiveness of the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.180-183
• /
• 2002

In this paper, we propose new unsharp masking technique based on the multiscale gradient planes. The unsharp masking technique is implemented as a high-pass filter and improves the sharpness of degraded images. However, the conventional unsharp masking enhances the noise component simultaneously. To reduce the noise influence, we introduce the edge information from the difference of the gradient values between two consecutive scales of the multiscale gradient. The multiscale gradient indicates the presence of image edges as the ratio between the gradients between two different scales by its multiscale nature. The noise reduction of the proposed method does not depend on the variance of images and noises. In experiment, we demonstrate enhancement results for blurred noisy images and compare with the conventional cubic unsharp masking technique.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.56-63
• /
• 1983

The aerodynamic characteristics of the most popular car (PONY 2) produced in Korea have been experimentally investigated by Seoul National University's wind tunnel. The model (PONY 2) chosen for the wind tunnel was a 1/5 scale of the original car without simulated underbody, cooling air flow and accessories. The measured aerodynamic drag coefficient corrected by JARI formula is 0.45 which is very close to those of small foreign cars. To see the effect of the different configurations on the aerodynamic drag, the modifications have been made by changing the hood slope and backlight slope, and putting the add-on-aerodynamic devices on the orignal shape. The rear spoiler was found the most effective one to reduce the aerodynamic drag. It may be concluded that the considerable aerodynamic drag reduction can be achieved by changing the slopes and A-O-A devices at the proper places of the car.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.93-99
• /
• 2015

Purpose: Various studies on the soil-based green roof systems have been conducted, and a lot of green roof systems were developed. A growing medium board is one of them which was developed for better application and maintenance, however the effect and performance of this material need to be verified. On this background, the purpose of this study is to prove cooling load reduction of green roof by monitoring experiment on the full-scale mock-ups. Method: To do this, Solid growing medium boards were installed on the mock-ups, and indoor temperature and humidity were monitored and analyzed. Result: As a results, the green roof with solid growing medium board were verified effective for controlling indoor temperature in summer.