• Nuclear Engineering and Technology
• /
• 제30권4호
• /
• pp.308-317
• /
• 1998

Ensuring occupational radiation exposure(ORE) as low as is reasonably achievable(ALARA) has been one of very important requirements in a nuclear power plant. It is well known that about 70 percent of occupational dose has incurred from maintenance jobs in the outage period. To reduce occupational dose effectively, the high-dose jobs in the outage period should be identified with their dose reduction potentials and methods. In this study, a PC-based ORE database program, INSTORE, is developed to evaluate ORE doses in individual jobs, and the ORE data of Kori Units 3 and 4 are assembled to the database. Based on customary job classification, radiation work is classified into 26 main jobs which comprise 61 detailed jobs, and occupational doses are assessed according to each detailed job. As a result, high-dose jobs are identified with dose reduction priority in terms of collective ORE dose. It is recommended that adeqaute dose reduction methods for these jobs should be prepared to improve their working conditions and procedures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.15-16
• /
• 2006

In this paper, we propose an adaptive SLM scheme based on peak observation for PAPR reduction of OFDM signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where power difference between the original input sequence and the FFT outputs of the scaled signal is large, are identified. Then, the phase sequences which have the maximum number of phase-reversed sequence words only for these positions, are selected. Finally, only using the selected phase sequences, the generic SLM procedure is performed for the original input sequence. Simulation results reveal that the proposed adaptive SLM remarkably reduces the complexity in terms of IFFT and PAPR calculations than the conventional SLM, while maintaining the PAPR reduction performance.

• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.937-953
• /
• 2015

This paper investigates the load model for single footfall trace of human walking. A large amount of single person walking load tests were conducted using the three-dimensional gait analysis system. Based on the experimental data, Fourier series functions were adopted to model single footfall trace in three directions, i.e. along walking direction, direction perpendicular to the walking path and vertical direction. Function parameters such as trace duration time, number of Fourier series orders, dynamic load factors (DLFs) and phase angles were determined from the experimental records. Stochastic models were then suggested by treating walking rates, duration time and DLFs as independent random variables, whose probability density functions were obtained from experimental data. Simulation procedures using the stochastic models are presented with examples. The simulated single footfall traces are similar to the experimental records.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.41-48
• /
• 2013

Springback is a very typical dimensional discrepancy phenomenon, which occurs usually on the final stamping parts after the tool loading is removed. Variation of springback leads to amplified variations and problems during assembly of the stamped components, in turn, resulting in quality issues. The variations in the properties of the incoming material and process parameters are the main causes of springback variation. In this research, a robust design methodology which combines orthogonal array based experimental design and design space reduction skim to reduce the springback variation for advanced high strength steel parts in sheet metal forming is suggested. The concept of design space reduction is adapted in the experimental design setup to improve the quality of the obtained solution. The effectiveness of the proposed procedures is illustrated through a robust design of springback in metal forming process of a cross member of auto body.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.300-308
• /
• 2011

Purpose: The goal of reduction mammaplasty is breast with natural cone shape, minimizing scars, well-placed and sensate nipple-areolar area and maintaining breast physiology. In order to satisfy that goal, variable reduction mammaplasty methods are performed, however, two methods such as vertical reduction method and inverted T-scar method are currently most used. We compared indications and advantages of the two methods and set up useful guidlines. Methods: For 15 years from 1995 to 2010, we experienced 84 patients (162 breasts). We performed vertical reduction method as Lejour's superior pedicle technique (45 patients) and inverted T-scar method as Goldwyn's inferior dermal flap technique (39 patients). We evaluated the result of the operation comparing patient's age, amount of resected tissue, complications and post-operative scars of the two methods. Results: The mean age was 36 years and the vertical reduction group was 3 years younger than inverted T-scar group. The mean breast tissue resection amount per one breast, inverted T-scar group (712 gm) was lagger than vertical reduction group (395 gm). Conclusion: There is no ideal method for reduction mammaplasty until now. However, we suggest that guide line, the vertical reduction method is effective for minimal and moderate macromastia in young and middle aged women and inverted T-scar method is appropriate for severe macromastia with ptosis in elderly women. Recently, all procedures tried shorter and smaller scar on the vertical line as small I, J or L shape scar, and inframammary fold as short inverted T-scar.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.406-413
• /
• 2004

Progress in medical science and cell biology has resulted in the transplantation of human cells and tissues from on human into another, facilitating reproduction and the restoration of form and function, as well as enhancing the quality of life. For more than 40 years, society has recognized the medical and humanitarian value of donation and transplanting organs and tissues. The standard operating procedures of hard tissues reflect the collective expertise and conscientious efforts of tissue bank professionals to provide a foundation for the guidance of tissue banking activities. Procurement of allograft tissues from surgical bone donors is a part of tissue banking. During the past decades the use of bone allografts has become widely accepted for the filling of skelectal defects in a variety of surgical procedures. In particular in the field of orthopaedic and oral and maxillofacial surgery the demand for allografts obtained from either living or post-mortem donors has increased. Hospital-based tissue banks mainly retrieve allografts from living donors undergoing primary total hip replacement for osteoarthritis or hemi arthroplasty for hip fractures and orthgnatic surgery such as angle reduction. Although bone banks have existed for many years, the elements of organized and maintaining a hospital bone bank have not been well documented. The experience with a tissue bank at Korea Tissue Bank(KTB) between 2001 and 2004 provides a model of procurement, storage, processing, sterilization and documentation associated with such a facility. The following report describes the standard operating procedures of hard tissues such as femoral head obtained from living donors.

• 한국의학물리학회지:의학물리
• /
• 제30권4호
• /
• pp.75-88
• /
• 2019

Diagnostic reference level (DRL) is employed to optimize the radiation doses of patients. The objective of this study is to review the DRLs for interventional procedures in Korea and abroad. Literature review was performed to investigate radiation dose index and measurement methodology commonly used in DRL determination. Dose area product (DAP) and fluoroscopy time within each major procedure category were systematically abstracted and analyzed. A wide variation was found in the radiation dose. The DAP values and fluoroscopy times ranged 0.01-3,081 Gy·㎠ and 2-16,878 seconds for all the interventional procedures, 8.5-1,679 Gy·㎠ and 32-5,775 seconds for the transcatheter arterial chemoembolization (TACE), and 0.1-686 Gy·㎠ and 16-6,636 seconds for the transfemoral cerebral angiography (TFCA), respectively. The DRL values of the DAP and fluoroscopy time were 238 Gy·㎠ and 1,224 seconds for the TACE and 189 Gy·㎠ and 686 seconds for the TFCA, respectively. Generally, the DRLs of Korea were lower than those of other developed countries, except for the percutaneous transluminal angioplasty with stent in arteries of the lower extremity (LE PTA and stent), aneurysm coil embolization, and Hickman insertion procedures. The wide variation in the radiation doses of the different procedures suggests that more attention must be paid to reduce unnecessary radiation exposure from medical imaging. Furthermore, periodic nationwide survey of medical radiation exposures is necessary to optimize the patient dose for radiation protection, which will ultimately contribute to patient dose reduction and radiological safety.

• 대한치과의사협회지
• /
• 제57권10호
• /
• pp.613-622
• /
• 2019

The vitamin K antagonist (VKA), cumadin, or warfarin, is the only antithrombotic drug that can be orally administered and has excellent effective for decades. However, it is cumbersome to periodically inspect the prothrombin time (PT) order to maintain adequate concentrations that do not cause bleeding, takes a few days to indicate therapeutic effects, gets affected by several factors such as food and drugs etc, and narrow in the therapeutic range. Although recently in development, the non-vitamin K antagonist anticoagulants(NOACs) exhibit a rapid onset of action and have relatively short half- lives compared to Coumadin. Because of these pharmacokinetic properties, it is possible to modify an individual's anticoagulation status quite rapidly, minimizing the period where the anticoagulation activity is therapeutically suboptimal. And the short half -lives of these drug allow for the relatively rapid reduction of their anticoagulation effects. There are currently no published clinical trials specifically assessing the bleeding risks associated with dental procedures for patients taking the NOACs. It is not necessary to interrupt NOAC medication for dental procedures that are likely to cause bleeding, but which have a low risk of bleeding complications. Because the bleeding risk for these procedures is considered to be low, the balance of effects is in favour of continuing the NOAC treatment without modification, to avoid increasing the risk of a thromboembolic event. The patients should be advised to miss(apixaban or dabigatran) or delay(rivaroxaban) a dose of their NOAC prior to dental procedures that are likely to cause bleeding and which have a higher risk of bleeding complications. Because the risk of bleeding complications for these procedures is considered to be higher, the balance effects is in favour of missing or delaying the pretreatment NOAC dose. The interruption is only for a short time to minimize the effect on thromboembolic risk.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.71-81
• /
• 2017

In this study, a series of full-scale extrapolation procedures based on the Granville's similarity scaling method, which was employed by Schultz (2007), is modified and then applied to compare the resistance performance between two different anti-fouling coatings. As an analysis example, the low frictional AF coating based on a novel skin-friction reducing polymer named FDR-SPC (Frictional Drag Reduction Self-Polishing Copolymer), which had been invented by the present author, is employed. The low frictional coating, which gives 25.4% skin frictional reduction in lab test, is estimated to give 18.2% total resistance reduction for a 176k DWT bulk carrier.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권4호
• /
• pp.340-352
• /
• 2007

In this systematic review on bone reduction procedures for the correction of the prominent mandibular angle, we collected and sorted the methods. The strength and weakness, indication, complication, and final esthetic result of each method were evaluated. After searching and filtering the literatures on the base of inclusion criteria, 9 eligible case series studies were included in this study. There were 3 types of curved ostectomies and 4 types of lateral cortical ostectomies. Surgical procedures for curved ostectomies were divided into 2 types. One was single curved ostectomy and the other was multistaged curved ostectomy. Lateral cortical ostectomies reported were all similar to sagittal split ramus osteotomy. The complications reported in the included studies were scarce, but curved ostectomies may be able to induce many complications. The prominent mandibular angle must be analyzed in the lateral dimension and frontal dimension, and curved ostectomy can reduce the mandibular angle laterally while lateral cortical ostectomy can reduce the bigonial distance frontally. Because curved ostectomies can induce complications and unnaturally large mandibular angle while can not reduce bigonial distance efficiently, the current trend for the angle reduction procedure is lateral cortical ostectomies.