• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.455-463
• /
• 1996

Studies were carried out to determine the effect of sulfur dioxide on leaf injury and yield of ten soybean cultivars. Plants were fumigated with 2.0 ppm of $SO_2$ for 4 or 8 h in a closed-top field chamber. In the comparison of foliar injury, Paldalkong and Eunhakong were more susceptible to $SO_2$ than Bogwangkong, Jangsukong, and Jangkeungkong. Correlations between chlorophyll contents, peroxidase activity, and stomatal resistance of leaves and foliar susceptibility were insignificant. However, significant correlations $(r=-0.611^{\ast})$ were found between superoxide dismutase activity and foliar injury rates. Dry weight, number of pods and total grains were significantly reduced by $SO_2$ fumigation but plant height, number of nods and weight of 100 grains were not affected. Yield reduction rates were higher in Eunhakong and Paldalkong than in Bogwangkong and Jangkeungkong. A liniar relationship was found between foliar injury rate and the percent crop loss with a significant coefficient of b=-1.17 in the susceptible cultivar of Paldalkong, but Bogwangkong, insusceptible cultivar, showed lower value of -0.165.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.577-585
• /
• 2020

Purpose: The presence of the matric suction in unsaturated soil increases the stability of the slope, but the reduction of the matric suction due to precipitation can cause sudden slope failure, resulting in a major disaster. In this paper, engineering characteristics in unsaturated state were analyzed for granite weathering soil, which is the representative mountain soil of Korea. Method: Experiments and analysis were conducted on granulated weathering soil as unsaturated shear strength relationships for moisture characteristic curves, unsaturated injection curves, and matric suction under unsaturated conditions. Result: It was analyzed that a rapid change in the matric suction for volumetric water content occurs compared to the case where the particle size distribution is poor and the particle size distribution is good. A good case for the particle size distribution indicates a relatively small permeability coefficient at the same matric suction capacity compared to a poor case. The greater thematric suction, the greater the shear strength. Conclusion: For Korea's representative soil, granulated weathering soil, the functional characteristic curves, unsaturated permeability coefficients, unsaturated shear strength, etc., which are engineering characteristics in unsaturated state, were tested to secure each correlation.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.651-658
• /
• 2018

A foot pedal switch in the diagnosis x-ray radiography system has been researched to improve radiologic technologist works and patient satisfaction. The switch has been installed in the diagnosis x-ray radiography system used in domestic clinics. Quantitative evaluation has been conducted by measuring the exposure dose reproducibility test, tube voltage, mAs, and percentage average error. Qualitative evaluation has been conducted by analysis of the radiologic technologists questionnaire. In the quantitative evaluation for the use of the foot pedal switch, the coefficient of variation was less than 0.05 in the exposure dose reproducibility test. In the mAs test, percentage average error of ${\pm}20%$ was measured. There was no problem raised since it meets the all inspection standards of the diagnosis x-ray generator. In the qualitative evaluation, most of the opinions are that it has a clinical value for the foot pedal switch in the diagnosis x-ray radiography system. Therefore, developing the foot pedal switch for the diagnosis x-ray radiography system can improve effectively the rapidity and accuracy of the radiologic technologist work. In addition, it is effective in decreasing the x-ray exposure of patients and increasing satisfaction for the medical service due to reduction of retaking x-ray.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.4
• /
• pp.447-457
• /
• 2015

Water cycle within the human civilization has become important with urbanization. To date, water cycle in the eco-system has been the focus in identifying the degree of water cycle in cities, but in practicality, water cycle within the human civilization system is taking on an increasing importance. While in recent years plans to reuse water have been implemented to restore water cycle in cities, the effect that such reuse has on the entire water cycle system has not been analyzed. The analysis on the effect that water reuse has on urban areas needs to be go beyond measuring the cost-savings and look at the changes brought about in the entire city's water cycle system. This study uses a SWAT model and water balance analysis to review the effects that water reuse has on changes occurring in the urban water cycle system by linking the water cycle within the eco-system with that within the human civilization system. The SWAT model to calculate the components of water cycle in the human civilization system showed that similar to measured data, the daily changes and accumulative data can be simulated. When the amount of water reuse increases in urban areas, the surface outflow, amount of sewer discharge and the discharged amount from sewage treatment plants decrease, leading to a change in water cycle within our human civilization system. The determinant coefficients for reduced surface outflow amount and reduced sewer discharge were 0.9164 and 0.9892, respectively, while the determinant coefficient for reduced discharge of sewage treatment plants was 0.9988. This indicates that with an increase in water reuse, surface flow, sewage and discharge from sewage treatment plants all saw a linear reduction.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.246-252
• /
• 2000

Thermoelectric properties of the $Bi_2(Te_{0.85}Se_{0.15})_3$ alloy, prepared by mechanical alloying and hot pressing, were investigated with the variation of the hot-pressing temperature ranging from $300^{\circ}C$ to $550^{\circ}C$. Contrary to the p-type behavior of single crystal, the hot-pressed $Bi_2(Te_{0.85}Se_{0.15})_3$ alloy exhibited n-type conduction without addition of donor dopant. When the $Bi_2(Te_{0.85}Se_{0.15})_3$ powders were annealed in $(50{\%}\;H_2+50{\%}\;Ar)$ atmosphere, the hot-pressed specimens exhibited a positive Seebeck coefficient due to the reduction of the electron concentration by removal of the oxide layer on the powder surface and annealing-out of the excess Te vacancies. Figure-of-merit of the hot-pressed $Bi_2(Te_{0.85}Se_{0.15})_3$ alloy was improved by hot pressing at temperatures above $450^{\circ}C$, and the maximum value of $1.92{\times}10^{-3}/K$ was obtained for the specimen hot-pressed at $550^{\circ}C$.

• Women's Health Nursing
• /
• v.2 no.1
• /
• pp.5-24
• /
• 1996

The Delivery Process can be viewed as one of the developmental crisis that forces the majority of women. During the labor and delivery process the women may face a variety of problems and pain with all its subjectivity. This developmental crisis may lead a pregnant women to have a negative experience in delivery. For nurses, to help to pregnant women check with the crisis and perceived support and to positive experience. This study intended to analyze the pregnant women's delivery experience according to supporter during labor. The subjects for this study were 45 pregnant women who had normal delivery without complications, within 37 to 42 weeks of pregnancy. Data Collection was done from April 24th to May 20th 1995 by two instruments, a support measurement scale and a delivery experience measurement scale which were consisted it 18-items scale developed by researcher. The data was analyzed by SPPS program using descriptive statistic Kruskal-Wallis one way analysis and Spearman Correlation Coefficient. The result of this study are as follows. 1. Support distribution by support contents is shown is order of holding the hands (97.8%), help to urination(86.7%), bed arrangement(57.8%), massaging the arms and legs(55.6%), changes in posture(44.4%), teaching how to produce power(44.4%), while emotional support is disclosed in order of sympathy(97.8%), encouragement(82.2%), hearing the needs(60.0%), However, information support was as low as less than 33.3%. 2. The extent of delivery experience a Pregnant woman perceives is revealed in order of a sense of comfortableness(44%), satisfaction(43.2%), reduction of fear(43.2%), familiarity (42.8%), self-confidence (42.5%), decrease of laborpain(39.9%). 3. The extent of delivery support a pregnant woman perceives reveals that physical support($x^2$=22.4452, P=.000) and information support($x^2$=7.5187, P=.0233) Show a significant difference among the mothers group, the mothers-in-law group, the husbands group, but to significant difference was found in emotional support among them. 4. The extent of delivery experience a pregnant woman perceives represents a significant difference in order of the mothers group, the mothers in-law group, and the husbands group($x^2$=13.4255, P=.0012). 5. A positive correlation was manifested between the extent of support and delivery experience a pregnant woman perceives(r=.8643, P=.000). This information can be utilized as data to further the understanding delivery experience according to supporter. In Consequence, it is recommended that the range of family support limited to husband should be expended including mother and mother-in-law.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.625-631
• /
• 2011

The passive control of fluid force acting on a square prism near a plane wall was studied by attaching horizontal splitter plate on the corner of the prism. The width of the splitter plate was 10% of the square width. The experiments were performed by measuring of fluid force on the prism and by visualization of the flow field using PIV. The experimental parameters were the attaching position and the space ratios G/B between the prism and wall. The flow between the prism and wall was remarkable and Karman vortex in the wake of the prism was considerable in the space ratio over 0.4. The point of inflection of average lift coefficient and Strouhal number on the prism were represented at the space ratio G/B=0.4 for the prototype prism and G/B=0.6 for the prism having horizontal splitter plate. The drag of the prism was reduced average 4.5% with the space ratios by attaching the horizontal splitter plate at the rear and lower corner on the prism. In this case, the size of the separated region on the upside of the prism was smaller than that of prism without the splitter plate.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.83-92
• /
• 2014

Weather condition is one of the crucial factors affecting travelers' mode choice. Nevertheless, there are numerous indefinite traffic phenomena under various weather conditions. This study was conducted to verify the hypothesis that transit riderships decrease as precipitation increases. To clarify the relationship between precipitation and transit ridership, a seemingly unrelated regression model was employed with data such as daily precipitation and daily transit riderships of 3 transit modes (bus, metro, and shuttle bus) collected in Busan for recent 24 months. The estimation results show that transit riderships decreased as the daily precipitation increased when the daily precipitation is greater or equal to 10mm/day (0.169%, 0.101%, and 0.172% reduction in bus, metro, and shuttle bus riderships, respectively, when the daily precipitation increased by 1mm). When comparing the impact of precipitation on transit riderships by modes using a cross-equation parameter restriction test, the decrease in metro ridership is relatively insensitive to the change in precipitation. However, the negative coefficient of precipitation in the metro ridership estimation model indicates that the transit users in Busan may alter their mode to taxi or automobile and/or may give up the trip itself in bad weather condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2037-2046
• /
• 2000

It has been reported that the inhibition effect of pH on activated sludge follows noncompetitive inhibition kinetics. However. the noncompetitive inhibition kinetic equation can not be directly applied to pH inhibition because of the difficulty in quantification of pH in terms of inhibitor concentration. So, many empirical equations have been developed to describe the pH inhibition effect especially for acidic condition. In this research. the pseudo toxic concentration ($C_{PT}$) concept model to quantify pH inhibition effect on activated sludge was proposed and compared to other existing models. The $C_{PT}$ concept model can explain the reduction of the maximum specific growth rate (${\mu}_{max}$) caused by the pH inhibition more accurately than any other models, at a wide range of pH. The only model parameter. $K_I$ can be easily estimated by Lineweaver-Burk linearization method.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.