• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.296-299
• /
• 2004

The effects of polymer-cement ratio, antifoamer content and shrinkage-reducing agent content on the setting time and drying shrinkage of high-fluidity polymer-modified mortars using redispersible polymer powder are examined. As a result, the setting time of the high-fluidity polymer-modified mortars using redispersible polymer powder tend to delayed with increasing polymer-cement ratio, regardless of the antifoamer conten,. Irrespective of the antifoamer content, the drying shrinkage of the high-fluidity polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio and shrinkage-reducing agent content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.300-303
• /
• 2004

In this study, the mixing contents of ceramic powder and of shrinkage-reducing agent (SRA) influencing on the strength properties of MMA-modified polymer paste were examined. Regardless of SRA content, the flexural. the compressive and the adhesive strengths of the MMA-modified polymer paste tended to increase as the mixing content of ceramic powder increased. On the other hand, those strengths of the polymer paste tended to decrease as the mixing content of SRA increased without regard to the paste content. Furthermore. the adhesive strength of MMA-modified polymer paste in a wet condition decreased about $30-40\%$ of that in an air-dry condition without regard to the mixing content of ceramic powder and SRA.

• 콘크리트학회논문집
• /
• 제15권3호
• /
• pp.409-416
• /
• 2003

본 연구에서는 재유화형 분말수지를 혼입한 초속경 폴리머 시멘트 모르타르의 공기량, 응결시간, 건조수축 및 강도특성에 미치는 분말소포제 첨가율 및 분말 수축저감제 첨가량의 영향에 대하여 검토하였다. 그 결과, 재유화형 분말수지를 혼입한 초속경 폴리머 시멘트 모르타르의 공기량은 분말소포제 첨가율 및 폴리머-시멘트비의 증가에 따라 감소하는 경향을 보였다. 재유화형 분말수지를 혼입한 초속경 폴리머 시멘트 모르타르의 응결시간은 분말소포제 첨가율에 관계없이 폴리머-시멘트비의 증가에 따라 늦어지는 경향을 보였다. 재유화형 분말수지를 혼입한 초속경 폴리머 시멘트 모르타르의 건조수축은 분말소포제 첨가율에 관계없이 폴리머-시멘트비 및 분말 수축저감제 첨가율의 증가에 따라 감소하는 경향을 보였다.또한 분말소포제 첨가율 및 분말수축저감제 첨가율에 관계없이 재유화형 분말수지를 혼입한 초속경 폴리머 시멘트 모르타르의 휨 및 인장강도는 폴리머-시멘트비의 증가에 따라 증가하는 경향을 보였으나, 압축강도는 감소하는 경향을 보였다.

• 한국분말재료학회지
• /
• 제14권3호
• /
• pp.190-196
• /
• 2007

A process known as the MR and EMR combination process is able to overcome the shortcomings of the MR (metallothermic reduction) and EMR (electronically mediated reaction) process. The effects of $K_2TaF_7$ as the raw material, sodium as the reducing agent and KCl/KF as the diluent on the characteristics of tantalum powder are investigated. In this study, a MR-EMR combination process has been employed to tantalum powder on the location of reductant. The excess of reductant were varied from 25, 50 to 75 wt%. The total charge and external circuit decreases as the amount of reductant increases. The average particle size increases with increasing the amount of reductant.

• 한국표면공학회지
• /
• 제42권4호
• /
• pp.186-189
• /
• 2009

In this study, niobium powder was made from potassium heptafluoroniobite($K_2NbF_7$) using sodium(Na) as a reductant and KCl, KF as a diluent based on the hunter metallothermic reduction method. The excesses of reductant were varied from 0%, 3%, 5% and 7%. When 7% excess of sodium was used, the un-reacted sodium remained in the reacted product. The niobium powder has been achieved by reducing 50 g of $K_2NbF_7$ with 5% sodium excess in a charge at a reduction temperature of $850^{\circ}C$. The proportion of fine fraction decreased appreciably and the yield of niobium powder improved from 65% to 85% with the increase of sodium excess. The average particle size of niobium powder is improved from 0.2 microns to 0.3 microns in the 5% excess sodium.

• 한국지반공학회논문집
• /
• 제26권4호
• /
• pp.5-14
• /
• 2010

본 연구에서는 새로운 동상 억제제로서 폐타이어 파우더의 활용가능성을 검토하기 위해 폐타이어 분말 혼합토와 미혼합토를 대상으로 3년간 일본 토마코마이에서 야외실험 수행하였다. 야외실험 결과, 폐타이어 파우더를 20% 혼합함에 의해 현저한 동상억제 효과가 발생함을 확인하였으며, 관련 동상억제 효과를 동상량, 동상율, 열전도율, 투수성, segregation potential 이론 등을 중심으로 정량적으로 검토하였다.

• 한국식품조리과학회지
• /
• 제15권3호
• /
• pp.224-230
• /
• 1999

The purpose of this study was to find out the optimal mixing ratio of green tea powder, sugar, and water for the preparation of Seolgiddeok through Response Surface Methodology based on the color, sensory, and texture test. The oganoleptic and textural properties of Seolgiddeok prepared with various concentrations of green tea powder (0% (control group), 0.5% (GT-0.5 group), 1% (GT-1.0 group), 1.5% (GT-1.5 group), 2% (GT-2.0 group)), and their quality changes during storage were also investigated. The optimal mixing ratio of green tea powder, sugar, and water for preparing the best quality Seolgiddeok was 1.0%, 12%, and 22%, respectively. The proximate composition of green tea powder was 21.70% of crude protein, 8.49% of crude lipid, 2.95% of reducing sugar, and 6.40% of ash. The contents of crude lipid, reducing sugar, and catechins in Seolgiddeok added with a green tea powder were increased with increasing the content of green tea powder. The hardness and gumminess of GT-1.0 group were the lowest among four groups, whereas GT-1.0 and GT-2.0 groups had the lowest cohesiveness. While the control group was the lowest in adhesiveness, the springness was not significantly different among all groups. GT-0.5 and GT-1.5 groups were the highest in sweet taste and colorfulness, respectively. However, GT-1.0 group had the best overall quality. Total microbial numbers, the acidity and pH in Seolgiddeok during storage were decreased with increasing green tea powder content, and especially those of GT-1.0 and GT-1.5 groups were relatively the lower than others. The “L” value (lightness) of the control group (no additives) was the highest among five groups, and the value was decreased with storage period, and especially GT-0.5 groups had the lowest brightness. The“a”value (reddness) of the control group was the highest, followed by GT-0.5, GT-1.0, GT-1.5, and GT- 2.0 group in order. The“b”value (yellowness) was increased with the increase of green tea powder content. Above results indicated that GT-1.0 group showed the best quality of Seolgiddeok through organoleptic and rheology tests.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.651-657
• /
• 2004

본 연구에서는 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 공기량, 응결시간, 건조수축 및 강도특성에 미치는 분말소포제 첨가율 및 수축저감제 첨가량의 영향에 대하여 검토하였다. 그 결과, 재유화형 분말수지 혼입 고유동 폴리머시멘트 모르타르의 공기량은 분말소포제 첨가율 및 폴리머-시멘트비의 증가에 따라 감소하는 경향을 보였다. 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 응결시간은 분말소포제 첨가율에 관계없이 폴리머-시멘트비의 증가에 따라 늦어지는 경향을 보였다. 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 건조수축은 분말소포제 첨가율에 관계없이 폴리머-시멘트비 및 분말 수축저감제 첨가율의 증가에 따라 감소하는 경향을 보였다. 또한 분말소포제 첨가율 및 수축저감제 첨가율에 관계없이 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 휭 및 인장강도는 폴리머-시멘트비의 증가에 따라 증가하는 경향을 보였으나, 압축강도는 감소하는 경향을 보였다.

• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.123-129
• /
• 2018

본 연구의 목적은 고강도 및 일반강도 영역의 물-결합재 비에 대해 시멘트계열 재료의 점도를 감소시키기는 것에 대한 정보를 제공하는 것이다. 시멘트 계열 재료의 유동성을 결정하는 것은 물-결합재 비 및 치환재료와 감수제가 있다. 이를 레올로지적으로 보았을 때 물-결합재 비가 낮은 경우 항복치와 점도를 낮추며 감수제의 경우 항복치 저감에 영향을 주지만 점도 저하에는 한계가 있다. 따라서 이 연구에서는 시멘트 계열 재료의 점도를 낮추기 위해 물-결합재 비에 따른 폐석회석 치환에 대한 점도 저하 가능성을 분석하였다. 실험 결과, 폐석회석을 치환하였을 경우 점도 저하의 효과가 있었으며 이는 시멘트 계열 재료의 점도 제어에 유의미한 결과를 주는 것으로 판단되었다. 따라서 본 연구의 결과는 시멘트 계열 재료의 점도를 낮추는 방안으로써 분체 치환에 의한 방안의 기초적인 자료가 될 것으로 생각된다.

• Computers and Concrete
• /
• 제11권1호
• /
• pp.63-73
• /
• 2013

In this study, the effect of reducing cement by proportional addition of waste powder rubber on the performance of concrete under impact three-point bending loading were investigated experimentally and numerically. Concrete specimens were prepared by adding 5%, 10% and 20 % of rubber powder as filler to the mix and decreasing the same percentage of cement. For each case, three beams of $50mm{\times}100mm{\times}500mm$ were loaded to failure in a drop-weight impact machine by subjecting them to 20 N weight from 300mm height, while another three similar beams were tested under static load. The bending load-displacement behavior was analyzed for the plain and rubberized specimens, under static and impact loads. A three dimensional finite-element method simulation was also performed by using LUSAS V.14 in order to study the impact load-displacement behavior, and the predictions were validated with the experimental results. It was observed that, despite decreasing the cement content, the proportional addition of powder rubber until 10% could yield enhancements in impact tup, inertial load and bending load.