• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.4
• /
• pp.59-67
• /
• 2021

In this study, the performance of the single heat source system and the hybrid system was comparatively analyzed. Case 1 is a ground heat source system, and Case 2 is a water heat source system. Case 3, a hybrid system, reduced the capacity of the ground heat source and applied a water heat source as an auxiliary heat source, and Case 4 was composed of a system that applied a water heat source as an auxiliary heat source to the ground heat source system. As a result of the simulation, in case 3, energy consumption was reduced by up to 2.67% compared to ground sources for cooling. In Case 4, COP was improved by up to 10.02% compared to ground sources during cooling, and EST was calculated to be 2.42℃ lower. During heating, 0.83% was improved compared to the water heat source. At this time, the EST was calculated to be 2.25℃ higher than the water heat source.

• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.263-272
• /
• 2023

A collimator refers to an optical system that images a collimated beam at a desired point. A resolution target located at a near distance can be converted into a virtual image located at a long distance. To test the resolution for mobile cameras, a large target is placed at a long distance. If a collimator system is used, the target can be placed at a near distance. The space required for a resolution inspection can thus be drastically reduced. However, to inspect a mobile camera, the exit pupil of the collimator system and the entrance pupil of the mobile camera must match, and the stop of the collimator system must be located on the last surface. Because a collimator system cannot be symmetrical with respect to the stop, the distortion becomes extremely large, which can be corrected by combining the collimator symmetrically with respect to the object plane. A novel system was designed to inspect an optical lens on a mobile phone. After arranging the refractive power, lenses were added using the equivalent lens design method. The distortion was reduced to less than 1%. This optical system satisfies a half-field angle of 45° and an optical performance sufficient for inspection.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.5
• /
• pp.409-415
• /
• 2015

This study compared the heart rate variability tests of healthy college students and chronic fatigue patients for 2 years. Study subjects were idiopathic chronic fatigue patients who carried out the HRV tests and students conducted HRV test when health screening test. Study subjects were 250 people, 104 people and men (41.6%), women were 146 patients (58.4%). In patient group, the autonomic nervous system activity was decreased, the activity of the sympathetic nerve and the parasympathetic nerve were significantly reduced compared to the control group(Patient:84.17±16.27, Control:98.33±17.28). Regardless of gender, patient group's autonomic nervous system activity was decreased, the activity of the sympathetic nerve and the parasympathetic nerve were significantly reduced, compared to the control group(Patient Female:84.17±16.27, Patient Male:84.07±14.96/Control Female:98.33±17.28, Control Male:96.45±16.92). Even though same ages, patient group's autonomic nervous activity was reduced compared to control group(Patient:89.36±12.43, Control:97.39±16.91). Fatigue patients' activity of the sympathetic nerve and the parasympathetic nerve were significantly reduced, regardless of the fact that activity of the sympathetic nerve is increased and the parasympathetic nerve is decreased in stress state like an impassioned injury(七情傷). Therefore HRV test is useful to diagnose Fatigue from this study.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.75-84
• /
• 2002

In order to find out impact insulation properties, various types of current radiant floor heating systems and light-framed floors that are used in light-framed residential buildings were evaluated for two types of impact sources at the same time. Sound Pressure Level (SPL) was different from each impact sources for those spectrum patterns and peaks. In case of light-framed floor framework, the excitation position and the assumed effective vibrating area have effects on sound pressure level but it is not considerable, and Normalized SPL was reduced for each frequency by increasing the bending rigidity of joist. The mortar layer in the radiant heating system had relatively high density and high impedance, therefore, it distributed much of the impact power when it was excited, and reduced the Normalized SPL considerably. Nevertheless, Increasing a thickness of mortar layer had little influence on SPL. Ceiling components reduced the sound pressure level about 5~25 dB for each frequency. Namely, it had excellent sound insulation properties in a range from 200 to 4,000 Hz frequency for both heavy and lightweight impact sources. Also, there was a somewhat regular sound insulation pattern for each center frequency. The resilient channel reduced the SPL about 2~11 dB, irrelevant to impact source. Consequently, current radiant floor heating systems which were established in light-framed residential buildings have quite good impact sound insulation properties for both impact sources.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.83.2-83
• /
• 2002

1. Introduction 2. Twin-Drive Geared Mechanical System 3. Reduced-Order Control Model 4. Model-Based Control System 5. Suppression of Transient Vibration 6. Effects of Model-Based Control 7. Conclusions

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.4
• /
• pp.78-85
• /
• 1995

This paper covers stability and stabilization of Multi-Excited Induction Motor used in numberous electric equipment system of industrial field. The induction motor with multi-excitation has tow sets of three-phase system : One is connected to the AC source to supply most power required at the load, and the other is to the inverter for variable frequency and/or magnitude of voltage. The conventional induction motor is operated under single excitation mode only, that is called induction mode. But in multi-excited induction motor both the induction mode and the synchronous mode are possible, and the proposed multi-excited induction motor can be driven as a synchronous motor by the extra three-phase input. At the synchronous mode the efficiency is improved so higher than that at induction mode or conventional induction motor. The rating of the inverter used for speed control of numberous electric equipment system can be reduced upto one-tenth of that for conventional induction motor. Also the cost and maintenance fee of multi-excited induction motor can be reduced compared to any other motor.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.374-379
• /
• 2008

The purpose of seismic isolation system among them is to lengthen the period of structure and make its period shift from the dominant period of earthquake. In this study, the seismic behavior of arch structure with lead rubber bearing(LRB) and friction pendulum system(FPS) is analyzed. The arch structure is the simplest structure and has the basic dynamic characteristics among large spatial structures. Also, Large spatial structures have large vertical response by horizontal seismic vibration, unlike seismic behavior of normal rahmen structures. When horizontal seismic load is applied to the large spatial structure with isolation systems, the horizontal acceleration response of the large spatial structure is reduced and the vertical seismic response is remarkably reduced.

• Journal of the Korea Convergence Society
• /
• v.4 no.2
• /
• pp.43-50
• /
• 2013

Sliding mode control(SMC) are carried out in this literature. And to make the controllers perform better, fuzzy logic was chosen,it makes PID controller auto-tuning parameters and reduced the chattering problem of sliding mode control. Since SMC take error and derivative of error as inputs, after comparison some results are obtained.PID controller response faster yet sliding mode control is much steadier. However certain problems cannot be ignored that the chattering phenomenal cannot be reduced entirely and this motion may hurt the machine; this project only considered a simple system, there is no guarantee PID can work as well as in this case for a much more complex system. MATLAB simulink was the main approach to obtain the performance of the two controllers: to observe the control output of the two controllers, electric circuit and special controllers are designed and tested in MATLAB.

• Journal of applied mathematics & informatics
• /
• v.33 no.5_6
• /
• pp.559-578
• /
• 2015

Human Immune Deficiency Virus (or simply HIV) induces a persistent infection that leads to AIDS causing death in almost every infected individual. As HIV affects the immune system directly by attacking the CD4+ T cells, to exterminate the infection, the natural immune system produces virus-specific cytotoxic T lymphocytes(CTLs) that kills the infected CD4+ T cells. The reduced CD4+ T cell count produce reduced amount of cytokines to stimulate the production of CTLs to fight the invaders that weakens the body immunity succeeding to AIDS. In this paper, we introduce a mathematical model with discrete time-delay to represent this cell dynamics between CD4+ T cells and the CTLs under HIV infection. A modified functional form has been considered to describe the infection mechanism. Characteristics of the system are studied through mathematical analysis. Numerical simulations are carried out to illustrate the analytical findings.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.7
• /
• pp.584-588
• /
• 2002

The real-time characteristic of the adaptive leaning control algorithms is validated based on the applied results of the hydraulic servo system that has very strong a non-linearity. The evolutionary strategy automatically adjusts the search regions with natural competition among many individuals. The error that is generated from the dynamic system is applied to the mutation equation. Competitive individuals are reduced with automatic adjustments of the search region in accordance with the error. In this paper, the individual parents and offspring can be reduced in order to apply evolutionary algorithms in real-time. The feasibility of the newly proposed algorithm was demonstrated through the real-time test.