• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.29-37
• /
• 2012

This study is to find out the characteristics of the behavior of Geosyntehtic Reinforced Retaining Earth Wall(GRREW) through the laboratory experiment with the reduced-scale model, and to verify the effect of reinforcement by materials of GRREW. The loading tests after combining nonwoven geosynthetic, re-bar mesh nets and drainage blocks respectively among the components of the GRREW were performed in three cases of their slopes. In the cases of the behavior analysis including all of the components of the GRREW, the maximum horizontal displacement was generated 8.4mm at the location of 0.57H in the slope of 1:0.3; 3.8mm at the location of 0.57H in the slope of 1:0.6; 3.6mm at the location of 0.86H in the slope of 1:1.0. On average, the horizontal displacements of the GRREW were reduced by 83.8% against those of the original slopes. Lastly, seepage analysis and slope stability analysis were performed by modelling section of field, to confirm the effect of installation of drainage block in GRREW. We can confirm to compare increasing the slope safe factor and decreasing ground water in accordance with drainage blocks.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.1
• /
• pp.37-46
• /
• 2024

Objectives: The objective of this study was to characterize mental health issues among Vietnamese healthcare workers (HCWs) and to identify related factors. Methods: A cross-sectional study was conducted with 990 HCWs in 2021. Their mental health status was measured using the Depression, Anxiety, and Stress Scale. Results: In total, 49.9%, 52.3%, and 29.8% of respondents were found to have depression, anxiety, and stress, respectively. The multivariable linear regression model revealed that factors associated with increased anxiety scores included depression scores (β, 0.45; 95% confidence interval [CI], 0.39 to 0.51) and stress scores (β, 0.46; 95% CI, 0.41 to 0.52). Factors associated with increased depression scores included being frontline HCWs (β, 0.57; 95% CI, 0.10 to 1.10), stress scores (β, 0.50; 95% CI, 0.45 to 0.56), and anxiety scores (β, 0.41; 95% CI, 0.36 to 0.47), while working experience was associated with reduced depression scores (β, -0.08; 95% CI, -0.16 to -0.01). Factors associated with increased stress scores included working experience (β, 0.08; 95% CI, 0.00 to 0.16), personal protective equipment interference with daily activities (β, 0.55; 95% CI, 0.07 to 1.00), depression scores (β, 0.54; 95% CI, 0.48 to 0.59), and anxiety scores (β, 0.45; 95% CI, 0.39 to 0.50), while age was associated with reduced stress scores (β, -0.12; 95% CI, -0.20 to -0.05). Conclusions: Specific interventions are necessary to enhance and promote the mental health of HCWs so they can successfully cope with the circumstances of the pandemic.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.10 no.1
• /
• pp.58-72
• /
• 2003

The purpose of this study was to describe the perceived burden of the terminally III patients's caregiver and to analyze relationship between the perceived burden and the various demographics, illness characteristics, family relationships, and economic factor of the family & patients. The sample of 132 caregivers who care for the terminally III patients Kyung-Gi province, Seoul, Korea. The period of this study was from August to September, 2002. The perceived burden of the family caregiver was measured by the burden scale(20 items, 4 point scale) developed by Montgomery et al. (1985). The Data was analyzed using SAS-program by t-test and ANOVA. The results were as follows; 1. The mean of the family caregiver's burden score was 3.02. The score showed that caregivers perceive severe the level of burden. The hight items of the family caregiver's burden were' I feel it is painful to watch patient's diseases'(3.77). 'I feel afraid for what the future holds for my patients'(3.66), 'I feel it reduced to amount of privacy time'(3.64). 2. The caregiver's burden was significantly related to patient's gender(F=3.17, p= 0.0020), patient's job(F=2.49, p=0.0476), caregiver's age(F=4.29, p=0.0030), and caregiver's job(F=2.49, p=0.0476). 3. The caregiver's burden according to illness characteristics showed no significant difference. 4. The caregiver's burden was significantly associated with patient's family relationship (F=4.05, p=0.0041), patient's care mean period in a day(F=47.18,

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.117-130
• /
• 2005

In both deteministic user Optimal Traffic Assignment Model (UOTAM) and stochastic UOTAM, travel time, which is a major ccriterion for traffic loading over transportation network, is defined by the sum of link travel time and turn delay at intersections. In this assignment method, drivers actual route perception processes and choice behaviors, which can become main explanatory factors, are not sufficiently considered: therefore may result in biased traffic loading. Even though there have been some efforts in Stochastic UOTAM for reflecting drivers' route perception cost by assuming cumulative distribution function of link travel time, it has not been fundamental fruitions, but some trials based on the unreasonable assumptions of Probit model of truncated travel time distribution function and Logit model of independency of inter-link congestion. The critical reason why deterministic UOTAM have not been able to reflect route perception cost is that the route perception cost has each different value according to each origin, destination, and path connection the origin and destination. Therefore in order to find the optimum route between OD pair, route enumeration problem that all routes connecting an OD pair must be compared is encountered, and it is the critical reason causing computational failure because uncountable number of path may be enumerated as the scale of transportation network become bigger. The purpose of this study is to propose a method to enable UOTAM to reflect route perception cost without route enumeration between an O-D pair. For this purpose, this study defines a link as a least definition of path. Thus since each link can be treated as a path, in two links searching process of the link label based optimum path algorithm, the route enumeration between OD pair can be reduced the scale of finding optimum path to all links. The computational burden of this method is no more than link label based optimum path algorithm. Each different perception cost is embedded as a quantitative value generated by comparing the sub-path from the origin to the searching link and the searched link.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.318-327
• /
• 2012

BACKGROUND: For Non-Point Source(NPS) loads reduction, pollutant loads need to be quantified for major farming methods. The objective of this study was to evaluate impacts of farming methods on NPS pollutant loads from a paddy rice field during the growing season. METHODS AND RESULTS: The height of drainage outlet, amount of fertilizer, irrigation water quality were considered as farming factors for scenarios development. The control was derived from conventional farming methods and four different scenarios were developed based combination of farming factors. A field scale model, CREAMS-PADDY(Chemicals, Runoff, and Erosion from Agricultural Management Systems for PADDY), was used to calculate pollutant nutrient loads. The data collected from an experimental plot located downstream of the Idong reservoir were used for model calibration and validation. The simulation results agreed well with observed values during the calibration and validation periods. The calibrated model was used to evaluate farming scenarios in terms of NPS loads. Pollutant loads for T-N, T-P were reduced by 5~62%, 8~37% with increasing the height of drainage outlet from 100 mm of 100 mm, respectively. When amount of fertilizer was changed from standard to conventional, T-N, T-P pollutant loads were reduced by 0~22%, 0~24%. Irrigation water quality below water criteria IV of reservoir increased T-N of 9~65%, T-P of 9~47% in comparison with conventional. CONCLUSION(S): The results indicated that applying increased the height of drainage after midsummer drainage, standard fertilization level during non-rainy seasons, irrigation water quality below water criteria IV of reservoir were effective farming methods to reduce NPS pollutant loads from paddy in Korea.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.5-14
• /
• 2013

Purpose - We live in a world of constant change and competition. Many airports have specific competitiveness goals and strategies for achieving and maintaining them. The global economic recession, financial crises, and rising oil prices have resulted in an increasingly important role for facility investment and renewal and the implementation of appropriate policies in ensuring the competitive advantage for airports. It is thus important to analyze the factors that enhance efficiency and productivity for an airport. This study aims to determine the efficiency levels of 20 major airports in East Asia, Europe, and North America. Further, this study also suggests suitable policies and strategies for their development. Research design, data, and methodology - This paper employs the DEA-CCR, DEA-BCC, and DEA-Malmquist production index analysis models to determine airport efficiency. The study uses data on the efficiency and productivity of the world's leading airports between 2006 and 2010. The input variables include the airport size, the number of runways, the size of passenger terminals, and the size of cargo terminals. The output variables include the annual number of passengers and the annual cargo volume. The study uses basic data from the 2010 World Airport Traffic Report (ACI). The world's top 20 airports (as rated by the ACI report) are investigated. The study uses the expanded DEA Model and the Super Efficiency Model to identify the most effective airports among the top 20. The Malmquist productivity index analysis is used to measure airport effectiveness. Results - This study analyzes longitudinal and cross-sectional data on the world's top 20 airports covering 2006 to 2010. A CCR analysis shows that the most efficient airports in 2010 were Gatwick Airport (LGW), Zurich Airport (ZRH), Vienna Airport (VIE), Leonardo da Vinci Fiumicino Airport (FCO), Los Angeles International Airport (LAX), Seattle-Tacoma Airport (SEA), San Francisco Airport (SFO), HongKong Airport (HKG), Beijing Capital International Airport (PEK), and Shanghai Pudong Airport (PVG). We find that changes in airport productivity are affected more by technical factors than by airport efficiency. Conclusions - Based on the study results, we offer four airport development proposals. First, a benchmark airport needs to be identified. Second, inefficiency must be reduced and high-cost factors need to be managed. Third, airport operations should be enhanced through technical innovation. Finally, scientific demand forecasting and facility preparation must become the focus of attention. This paper has some limitations. Because the Malmquist productivity index is based on the hypothesis of the, the identified production change could be over- or under-estimated. Further, as DEA estimates the relative efficiency. It also cannot generalize to include all airport conditions because the variables are limited. To measure airport productivity more accurately, other input variables and environmental variables such as financial and policy factors should be included.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2001

In order to investigate the optimal design weight of sinkers for preventing cage net from deforming in current, the model experiment on 2 types of square cage nets with different S sub(n)/S, the ratio of total area of netting projected to the perpendicular to the water flow S sub(n) to wall area of netting S, and 4 kinds of sinkers was carried out in circulation water channel. The model cage nets were made in 1/10 scale and the total weight in water of 4 sinkers attached to each corner of their bottom frames was 18, 54, 90, and 126g, respectively equivalent to 0.1, 0.3, 0.5, and 0.7 kg per unit area of prototype net. The results obtained can be summarizes as follows; Due to the deformation of each net where it was lifted towards the surface in severe conditions, its volume was reduced. This depended highly on the weight of sinkers placed in the bottom corner of cage nets, even if the variation of S sub(n)/S had a little effect on their deformation in current less than 0.4 m/s. In addition, it was observed that the total weight of sinkers for preventing the net from deforming to the extent of less than 50% inside its initial volume was 31 to 245 kg in the range of 0.3 to 0.6 m/s and the adequate design weight of sinker was approximately 0.5 kg per its unit area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.19-26
• /
• 2019

To construct buildings on limited land, the size of the building is important. The development process needs to be minimized because determining the size of a structurally safe building at the planning stage incurs considerable time and cost. This study proposes the Limit Slenderness Ratio Approximation Equation. This study examined an outrigger structure system among several systems proposed for controlling the lateral displacement in tall buildings. This study compared the Limit Slenderness Ratio Approximation Equation with the approximate equation by changing the variables of the building model, and examined the size of the building using the approximate Equation. As an analysis program, the MAIDAS architectural structural analysis program was used to conduct model-specific analysis. The appropriate scale of the building to minimize the error between the approximate value calculated by the Limit Slenderness Ratio Approximation Equation and the analysis result of the structural analysis program is as follows. As the number of outrigger installation increases, the error can be reduced; the ratio of the cores is reasonable, from 20% to 30%, and the arrangement of the column is suitable only for the outer column without an internal column.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.253-263
• /
• 2018

Textile fashion industry is a core foundation industry, having the majority of companies with 10 or more workers, in Northern Gyeonggi Province. however the industry is mostly comprised of small unit-stream enterprises, orders are greatly reduced due to lately accelerated overseas expansion of medium/large-sized vendors and the growth-inhibiting vicious circle has being set in, as this situation causes the reduction of investment. For resolving the problems, this study proposes required political factors and concrete policy proposals by designing AHP research model(4 layers and 36 elements), based on grasp of the transitional aspect of industrial scale and business environment through analysis of various industrial statistics, preceding research such as related literature search and (industrial/academic/R&D/government) specialist opinion investigation, and then calculating relative importance and priority of each factor(element) within each layer. And for raising usefulness and availability of the research result by concretely suggesting the vision, strategies, core tasks and detailed projects in which the research model and deduced result are reflected.