• Title/Summary/Keyword: reduced pressure

Search Result 2,670, Processing Time 0.037 seconds

In-situ phosphorus doping effect on epitaxial growth of $Si_{1-x}Ge_{x}$ film with high ge fraction (고농도 ge fraction을 갖는 $Si_{1-x}Ge_{x}$ 막의 epitaxial growth에 대한 in-situ phosphorus doping 효과)

  • 이철진;박정훈;김성진
    • Proceedings of the IEEK Conference
    • /
    • 1998.06a
    • /
    • pp.437-440
    • /
    • 1998
  • We studied phosphorus doping effect on the epitaxial growth of $Si_{1-x}Ge_{x}$ film with high Ge fraction on Si substates at 550.deg. C by LPCVD. In a low $Ph_{3}$ partial pressure region such as below 1.25 mPa, the phosphorus dopant concentration increased linearly with increasing $PH_{3}$ partial pressure while the deposition rate and the Ge fraction were constant. In a higher $PH_{3}$ partial pressure region, the phosphorus dopant concentration and the deposition rate decreased, while the Ge fraction slightly increased. The deposition arate and the Ge fraction increased with increasing $GeH_{4}$ partial pressure while the phophours dopant concentration decreased. But the increasing rate of Ge fraction with incrasing $PH_{3}$ partial pressure was reduced at a high $GeH_{4}$ partial pressure. According to test results, it suggests that high surface coverage of phosphorus atoms suppress both the $SiH_{4}$ adsorption/reasction and the $GeH_{4}$ adsorption/reaction on the surfaces, and the effect is more stronger on $SiH_{4}$ than on $GeH_{4}$. In a higher $PH_{3}$ partial pressure region, the epitaxial growth is largely controlled by surface coverage effect of phosphorus atoms. The phosphorus surface coverage was slimited at a high $GeH_{4}$ partial pressure because adsorbed Ge atoms effectively suppresses the adsorption of phosphorus atoms.

  • PDF

Pressure Ulcer preventive intervention and risk factors for pressure ulcers : A review of the literature (욕창예방을 위한 중재와 영향요인 : 체계적 문헌고찰)

  • Yun, Haesun;Park, Jeeyeon
    • Journal of Digital Convergence
    • /
    • v.18 no.2
    • /
    • pp.323-331
    • /
    • 2020
  • This study was to perform a systematic review to examine pressure ulcer preventive intervention and risk factors. PRISMA flow diagram in accordance with the selection process of this research was done. The literatures were retrieved from domestic and international study from 2010 to June, 2019. A total of 30 literatures were selected according to the selection criteria of this study. The literatures were searched electronically using the search engine with the key words of 'pressure ulcers', 'bedsore', 'decubitus ulcers', 'intervention', 'prevention'. The results of this study suggest that mediation with position change and pressure reduction device reduced the incidence of pressure sores and was important for prevention. Based on the results of this study, we provide basic data for preventive intervention of pressure ulcers that are appropriate for each medical institution.

Comparison of PCB Surface Treatment Effect Using UV Equipment and Atmospheric Pressure Plasma Equipment (UV 장비 및 대기압 플라즈마 장비를 이용한 PCB 표면 처리 효과 비교)

  • Ryu, Sun-Joong
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.16 no.3
    • /
    • pp.53-59
    • /
    • 2009
  • Low pressure mercury lamp type UV equipments have been widely used for cleaning and modification of PCB surfaces. To enhance the productivity of the process, we newly developed remote DBD type atmospheric pressure plasma equipment. The productivity of both equipments could be compared by measuring surface contact angle for various transferring speed. By the result of the measurement, we could verify that the productivity of the atmospheric pressure plasma be superior to the productivity of the UV equipment. XPS experiments confirmed that the surface effect of the UV and atmospheric pressure plasma processing are similar for each other. Organic contamination level was reduced after the processing and some surface elements were oxidized for both cases. Finally, the atmospheric pressure plasma equipment was adapted to flip chip BGA's flux printing process and it was concluded that the printing uniformity be enhanced by the atmospheric pressure plasma surface treatment.

  • PDF

Derivations of Positive Pressure Condition for Development of Foldable Safe Pathway in Railway Tunnel Fires (철도터널화재용 접이식 대피통로 개발을 위한 양압 조건 도출)

  • Kim, JiTae;Ro, Kyoungchul
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.1
    • /
    • pp.284-289
    • /
    • 2019
  • The Korea Foldable safe pathway system is an evacuation support system to get temporary evacuation route in railway tunnel and large space fires. A prevention smoke screen is unfolded in fires and it is needed to prevent heat and smoke from fire source. Therefore, ventilation system for positive pressure condition is equipped with foldable safe pathway system. Numerical analyses of temperature and pressure distribution with distance from fire source were performed considering fire scenario of new train vehicle. The smoke temperatures did not exceed $200^{\circ}C$ that distance from the fire source was more than 20 m and smoke pressure was reduced with distance from fire source. Maximum smoke pressure was 14 Pa and average pressure was 6 Pa in position of prevention smoke screen. As results, to install foldable safe pathway system, ventilation system is need to maintain 6 Pa positive pressure condition.

The effect of curcumin on blood pressure and cognitive impairment in spontaneously hypertensive rats

  • Ji Young Lim;Wookyoung Kim;Ae Wha Ha
    • Nutrition Research and Practice
    • /
    • v.17 no.2
    • /
    • pp.192-205
    • /
    • 2023
  • BACKGROUND/OBJECTIVES: It is known that the renin-angiotensin system (RAS) in the brain could regulate cognitive functions as well as blood pressure. Inhibition of RAS for the improvement of cognitive function may be a new strategy, but studies so far have mostly reported on the effects of RAS inhibition by drugs, and there is no research on cognitive improvement through RAS inhibition of food ingredients. Therefore, this study investigated the effect of curcumin on blood pressure and cognitive function and its related mechanism in spontaneously hypertensive rat/Izm (SHR/Izm). MATERIALS/METHODS: Six-week-old SHR/Izm rats were divided into 5 groups: control group (CON), scopolamine group (SCO, drug for inducing cognitive deficits), positive control (SCO and tacrine [TAC]), curcumin 100 group (CUR100, SCO + Cur 100 mg/kg), and curcumin 200 group (CUR200, SCO + Cur 200 mg/kg). Changes in blood pressure, RAS, cholinergic system, and cognitive function were compared before and after cognitive impairment. RESULTS: The SCO group showed increased blood pressure and significantly reduced cognitive function based on the y-maze and passive avoidance test. Curcumin treatments significantly improved blood pressure and cognitive function compared with the SCO group. In both the CUR100 and CUR200 groups, the mRNA expressions of angiotensin-converting enzyme (ACE) and angiotensin II receptor type1 (AT1), as well as the concentrations of angiotensin II (Ang II) in brain tissue were significantly decreased. The mRNA expression of the muscarinic acetylcholine receptors (mAChRs) and acetylcholine (ACh) content was significantly increased, compared with the SCO group. CONCLUSIONS: The administration of curcumin improved blood pressure and cognitive function in SCO-induced hypertensive mice, indicating that the cholinergic system was improved by suppressing RAS and AT1 receptor expression and increasing the mAChR expression.

Characteristics of the Buttock Interface Pressure According to Wheelchair Propulsion Speed and Various Back Reclined Seating Position (휠체어 추진속도 및 등받이 경사각도에 따른 둔부 압력 변화 특성)

  • Kwon, Hyuk-Cheol;Kong, Jin-Yong
    • Physical Therapy Korea
    • /
    • v.12 no.2
    • /
    • pp.1-10
    • /
    • 2005
  • Pressure ulcers are serious complications of tissue damage that can develop in patients with diminished pain sensation and diminished mobility. Pressure ulcers can result in irreversible tissue damage caused by ischemia resulting from external loading. There are many intrinsic and extrinsic contributors to the problem, including interface tissue pressure, shear, temperature, moisture, hygiene, nutrition, tissue tolerance, sensory and motor dysfunction, disease and infection, posture, and body support systems. The purposes of this study were to investigate the relationship between buttock interface pressure and seating position, wheelchair propulsion speed. Seated-interface pressure was measured using the Force Sensing Array pressure mapping system. Twenty subjects propelled wheelchair handrim on a motor-driven treadmill at different velocities (40, 60, 80 m/min) and seating position used recline ($100^{\circ}$, $110^{\circ}$, $120^{\circ}$) with a wheelchair simulator. Interface pressure consists of average (mean of the pressure sensor values) and maximum pressure (highest individual sensor value). The results of this study were as follows; No significant correlation in maximum/average pressure was found between a static position and a 40 m/min wheelchair propulsion (p>.05). However, a significant increase in maximum/average pressure were identified between conditions of a static position and 60 m/min, and 80 m/min wheelchair propulsion (p<.05). No significant correlation in maximum pressure were found between a $90^{\circ}$ recline (neutral position) and a $100^{\circ}$, $110^{\circ}$, or $120^{\circ}$ recline of the wheelchair back (p>.05). No significant difference in average pressure was found between conditions of a $90^{\circ}$ recline and both a $100^{\circ}$ and $110^{\circ}$ recline of wheelchair back. However, a significant reduction in average pressure was identified between conditions of a $90^{\circ}$ and $120^{\circ}$ recline of wheelchair back (p<.05). This study has shown some interesting results that reclining the seat by $120^{\circ}$ reduced average interface pressure, including the reduction or prevention in edema. And interface pressure was greater during dynamic wheelchair propulsion compared with static seating. Therefore, the optimal seating position and seating system ought to provide postural control and pressure relief. We need an education on optimal seating position and a suitable propulsion speeds for wheelchair users.

  • PDF

Effects of Air Pollution on Asthma in Seoul: Comparisons across Subject Characteristics (서울지역 대기오염이 천식에 미치는 급성영향: 연구대상의 특성에 따른 비교)

  • Kim, Sun-Young;Kim, Jai-Yong;Kim, Ho
    • Journal of Preventive Medicine and Public Health
    • /
    • v.39 no.4
    • /
    • pp.309-316
    • /
    • 2006
  • Objectives: Korean epidemiological studies have used reduced samples according to the subject's characteristics, such as the health services provided, the historical note with asthma, and age, to examine the acute effect of air pollution on asthma using the Korean National Health Insurance records. However, there have been few studies on whether the effects shown in these reduced samples are different from those of all samples. This study compared the effects of air pollution on asthma attacks in three reduced samples with those of entire samples. Methods: The air pollution data for $PM_{10},\;CO,\;SO_2,\;NO_2,\;and\;O_3$, and weather conditions including temperature, relative humidity, and air pressure in Seoul, 2002, were obtained from outdoor monitoring stations in Seoul. The emergency hospital visits with an asthma attack in Seoul, 2002 were extracted from the Korean National Health Insurance records. From these, the reduced samples were created by health service, historical notes with asthma, and age. A case-crossover design was adopted and the acute effects of air pollution on asthma were estimated after adjusting for weather, time trend, and seasonality. The model was applied to each reduced sample and the entire sample. Results: With respect to the health service, the effects on outpatients were similar to those for the total sample but were different for inpatients. These similar effect sizes were also observed in the reduced samples according to the historical note with asthma and age. The relative risks of $PM_{10},\;CO,\;SO_2,\;NO_2,\;and\;O_3$, among the reduced and entire samples were 1.03, 1.04-1.05, 1.02-1.03, 1.04-1.06, and 1.10-1.17, respectively. Conclusions: There was no clear evidence to show a difference between the reduced samples and the entire samples.

Inactivation of Microorganisms and Enzymes in Foxtail Millet Takju by High Hydrostatic Pressure Treatment (초고압 처리에 의한 좁쌀탁주의 미생물 살균 및 효소 불활성화)

  • Jwa, Mi-Kyung;Lim, Sang-Bin;Mok, Chul-Kyoon;Park, Young-Seo
    • Korean Journal of Food Science and Technology
    • /
    • v.33 no.2
    • /
    • pp.226-230
    • /
    • 2001
  • High hydrostatic pressure was applied to Foxtail Millet Takju to investigate the effects of high pressure on inactivation of microorganisms and enzymes. Total bacteria, lactic acid bacteria and yeast in untreated Takju were $6.8{\times}10^7,\;1.3{\times}10^8\;and\;8.4{\times}10^7\;CFU/mL$, respectively. Total bacterial count in Takju reduced to $2.2{\times}10^5\;CFU/mL$, while lactic acid bacteria and yeast were sterilized completely when heated at $65^{\circ}C$ for 30 min. Lactic acid bacteria and yeast decreased with the increase of treatment pressure, and pressurization of 400 MPa for 10 min at room temperature sterilized completely the lactic acid bacteria and yeast in Takju. Total bacteria were not sterilized with pressurization of even 600 MPa at room temperature. Total bacteria were completely sterilized at $66^{\circ}C/400\;MPa/60\;min\;and\;66^{\circ}C/600\;MPa/10\;min$. Pressurization of Takju caused a partial inactivation of ${\alpha}-amylase$, and after pressurization at 600 MPa for 10 min at room temperature, 73.2% of the original activity remained. The activity of glucoamylase increased with the increase of treatment pressure. Treatment at $66^{\circ}C/400\;MPa/10\;min$ reduced the activity of ${\alpha}-amylase$ by 59.7% and glucoamylase by 20.5%. ${\alpha}-Amylase$ was inactivated to less than 1.2% of the original activity at $66^{\circ}C/600\;MPa/30\;min$.

  • PDF

A Numerical Study on Pressure Fluctuation and Air Exchange Volume of Door Opening and Closing Speeds in Negative Pressure Isolation Room (음압격리병실에서의 병실 문의 개폐속도에 따른 실간 압력변동 및 공기교환량에 대한 해석적 연구)

  • Kim, Jun Young;Hong, Jin Kwan
    • Journal of The Korea Institute of Healthcare Architecture
    • /
    • v.24 no.1
    • /
    • pp.51-58
    • /
    • 2018
  • Purpose: In this study, through the comparison of the pressure fluctuation and air exchange volume in negative isolation room according to the type of the door and door opening/closing speeds, which is one of the main factors causing the cross contamination of the negative pressure isolation room, establishes standard operating procedures to prevent cross contamination in high risk infectious diseases and isolation room design. Methods: In this study, the air flow each of the room is analyzed using ANASYS CFX CODE for flow analysis. In addition, the grid configuration of the door is constructed by applying Immersed Solid Methods. Results: The pressure fluctuation due to the opening and closing of the hinged door was very large when the moment of the hinged door opened and closed. Especially, at the moment when the door is closed, a pressure reversal phenomenon occurs in which the pressure in the isolation room is larger than the pressure in the anteroom. On the other hand, the pressure fluctuation due to the opening and closing of the sliding door appeared only when the door was closed, but the pressure reversal phenomenon not occurred at the moment when the sliding door was closed, unlike the hinged door. As the opening and closing speed of the hinged door increases, the air exchange volume is increased. However, as the opening and closing speed of the sliding door is decreased, the air exchange volume is increased. Implications: According to the results of this study, it can be concluded that the pressure fluctuation due to the opening and closing of the hinged door is greater than the pressure fluctuation due to the opening and closing of the sliding door. In addition, it can be confirmed that the pressure reversal phenomenon, which may cause to reduce the containment effect in negative pressure isolation room, is caused by the closing of the hinged door. Therefore, it is recommended to install a sliding door to maintain a stable differential pressure in the negative isolation room. Also, as the opening and closing speed of the hinged door is slower and the opening and closing speed of the sliding door is faster, the possibility of cross contamination of the room can be reduced. It is therefore necessary to establish standard operating procedures for negative isolation room for door opening and closing speeds.

Purification of Iron Oxides and Application to Magnetic Hard Ferrite

  • Kim, Jeong-Seog;Chou, Kyoung-Ho;Kim, Jai-Young
    • The Korean Journal of Ceramics
    • /
    • v.2 no.3
    • /
    • pp.125-130
    • /
    • 1996
  • Hematite iron ore and waste iron oxide sludge containing about 3-5 wt% $SiO_2$ were purified by three types of method developed on the basis of the Bayer process which is known as the purification process of bauxite ore. The basic principle of the developed methods lies in the fact that the impurities contained in the iron oxides, such as $SiO_2$ and $Al_2O_3$ are soluble in the alkaline reagents. Reaction of the raw materials with KOH was done in pressure vessel, at atmospheric pressure, and by both of these two. By the pressure vessel method $SiO_2$ content was reduced to below 0.5 wt% in the waste iron oxide sludge, while, in iron ore, $SiO_2$ remained at 2-3 wt%. The atmospheric pressure reaction rendered the waste iron oxide sludge $SiO_2$ content below 0.5wt% when the reaction temperature increased to above 90$0^{\circ}C$. The combined method of two previous methods was the most effective process and rendered the refined iron oxide about 300-400ppm of $SiO_2$. Using some refined iron oxides, Ba-ferrite was produced and magnetic properties were measured. The highest quality of magnetic properties obtained in this study were Br=2.09 G, bHc=1.99 KOe, iHc=4.54 KOe, $(BH)_{max}$=1.06 MGOe. Effect of sintering condition and chemical composition will be discussed.

  • PDF