• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.56-64
• /
• 2020

This study presents the hydrate induction time of PVCap according to subcooling temperature, salt concentration, and MEG concentration in order to analyze the inhibition effect of PVCap in various production environments of offshore gas fields. A high-pressure hydrate generator was made for the hydrate formation experiments. It was verified that the apparatus had sufficient reliability by comparing the results of hydrate equilibrium conditions and induction time from the apparatus with published reference data. As the subcooling temperature increased from 6.1℃ to 12.1℃, the induction time of PVCap concentration of 0.1~1 wt% decreased. When the salt concentration increased from 3 wt% to 7 wt%, the induction time was reduced by up to 78% under the condition of 0.5 wt% PVCap due to polymer structure degradation by salt effect. In the case of HHI (hybrid hydrate inhibitor) made by mixing MEG 10 wt% and PVCap, the change in induction time was not large compared to PVCap 1 wt% due to the under-inhibition effect. On the other hand, the hydrate inhibition efficiency of HHI with MEG 20wt% increased 1.7 times compared to PVCap.

• Journal of the Korean Society of School Health
• /
• v.12 no.1
• /
• pp.97-107
• /
• 1999

The purpose of the study was to ascertain the trends of future circumstances in primary education along with population change. These trends, which are subject to change in population and structure, have a great impact on the size and characteristics of primary school-aged children. Accordingly, it is imperative for the government to plan for future conditions involving primary education. The major findings of the study were as follows: 1. In the long-term primary school children aged 6-11, which accounted for 17.7% of the total population in 1970, will decline to 8.6% by the year 2000, 6.9% in 2020 and 6.4% in 2030. This drastic reduction in fertility rate is a direct result of pressure by the government to control population. 2. In 1996, the total number of classes in primary schools rose to 106,594. In the future, these numbers will actually decline. By 2003 the total number of classes will peak at 142,605, but until then drop off to 112,288 by 2030-a decrease of over 6,000. 3. The actual number of primary schools in 1997 totaled 5,721. This figure will reach its highest peak, 5,942, in 2003, but it is expected decrease later after declining by 1,263, it will bottom out at 4,679 in 2003. 4. The number of teachers at primary schools increased from 101,095 in 1970, 119, 064 in 1980, 136,800 in 1990 to 138,369 in 1995. Accordingly this means that the ratio of students to teaching staff changed for the better. By the year 2005, if teachers of specialty subjects (music, art, English, physical education) are assigned to every primary school with over 18 classrooms and the number of students per class is 30, it should improve educational surroundings. This is because it is expected that the population of primary school children will continue to grow until 2003 and then decrease. Thus, there is a need to maintain the number of primary school teachers between the years 2003 and 2030 so that the ratio of students to teachers will be reduced to 1/20.25. In considering factors related to migration which influence conditions of education, it is evident that changes have already begun. In the suburbs of Seoul, population shifts are causing overcrowding in classrooms. The government believes it would be inefficient to invest in education because fluctuating migration figures make it impossible. Accordingly, we have to be concerned about stabilizing the population throughout the entire country.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.145-159
• /
• 2004

A mathematical model and its computer solution program were proposed to analyze the motion of contact lenses which are being subject to lid-blinking. The equation was derived by incorporating an acceleration induced lid's force exerting on the contact lens, the viscous damping resistance in the tear layer beneath the lens and the sliding frictional force between the lid and the contact lens surface into the formulation of differential equation describing the vibration. The model predicts the time-dependent displacement from the equilibrium postion during/after the blinking. During the blinking, as the time for the completion of one cycle of blinking decreases the off-the-equilibrium displacement of contact lens increases while the decrease of diameter in the contact cause the opposite effect. It is found that lid pressure exerting on the lens cause an insignificant lens displacement from the equilibrium position. After blinking the frequency of damped oscillation of contact lens decreases as the diameter of lens increases, due to the incresed surface while the reduced blinking time does not cause a significant frequency change. This is because that driving force for the contact lens movement posterior to blinking is the capillary-induced force not the lid force.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.97-106
• /
• 2011

Purpose: This review article was written to theoretically compare the depressing force (pressure, adhesion) to the cornea between when the spherical lenses were being tightly and flat fitted. Methods: Mathematical equations and their numerical solution programs (model) were formulated to calculate the depressing (adhesion) force to the cornea by both the tightly and flat fitted contact lenses. Based on this proposed model the effects of parameters characterizing a contact lens such as BCs, diameters, edge shape and corneal shape (ratio of long and short corneal axis, p) on the depressing force to the cornea were predicted/analyzed in both tightly and flat fitting regimes. Results: Corneal adhesion increased as the corneal p-value increased. Adhesion increase caused by the increased p-value was much larger in flat fitted case than in tight fitted one. Corneal adhesion reduced abruptly as the BC increased in flat fitting regimes while the adhesion rise was insignificant in tight fitting ones. Reduction in corneal adhesion due to lens-size increase was predicted to be insignificant in both tight and flat fitting regimes. Both the lens edge shape (edge angle) and thickness were relevant only in tight fitting regime. Corneal adhesion increased as the increased with tight-fitted lenses. As the thickness of tight fitted lenses increased, corneal adhesion inversely decreased. Conclusions: The two most significantly affecting the depressing force to cornea were found to be the degree of corneal bending toward the periphery and the BCs of lenses.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.613-619
• /
• 2006

The objectives of this research are to evaluate the effect of membrane materials, particulate matter and membrane pore size on permeate flux. It was shown that the removal efficiency of high MW organic matter more than 10 kDa was lower than that of low MW organic matter for $MIEX^{(R)}$ process. For the change of permeate flux by the pretreatment process, $MIEX^{(R)}+UF$ process showed high removal efficiency of organic matter as compared with coagulation+UF processes, but high reduction rate of permeate flux was presented through the reduction of removal efficiency of high MW organic matter. The pretreatment of the raw water significantly reduced the fouling of the hydrophilic membrane, but did not decrease the flux reduction of the hydrophobic membrane. Flux decline on MF process increased due to the pore clogging, while the permeate flux decline of UF process decreased due to the formation of cake layer. It was shown that particle matter was not effect on MIEX+membrane process. But, for coagulation+membrane process, particle matter was important factor on permeate flux.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.92-100
• /
• 2018

Vortical systems are considered a main feature to sustain turbulence in a boundary layer through interaction. Such turbulent structures result in frictional drag and erosion or vibration in engineering applications. Research for controlling turbulent flow has been actively carried out, but in order to show the effect of vortices in a turbulent boundary layer, it is necessary to clarify the mechanism by which turbulent energy is transferred. For this purpose, it is convenient to demonstrate and capture phenomena in a laminar boundary layer. Therefore, in this study, the interactions of disturbed flow around a hemisphere on a flat plate in laminar flow were analyzed. In other words, a street of hairpin vortices was generated following a wake region formed after flow separation occurred over a hemisphere. Necklace vortices surrounding the hemisphere also appeared due to a strong adverse pressure gradient that brought high momentum fluid into the wake region thereby leading to an increase in the frequency of hairpin vortices. To mitigate the effect of these necklace vortices, local suction control was applied through a hole in front of the hemisphere. Flow visualization was recorded to qualitatively determine flow modifications, and hot-film measurements quantitatively supported conclusions on how much the power of the hairpin vortices was reduced by local wall suction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.211-224
• /
• 2018

It is important to design tunnel support system considering the various loads acting on the tunnel because they have a direct impact on the stability of tunnels. In Korea, standardized support patterns are defined based on the rock mass classification system depending on the project, and it is stated that it should be modified appropriately considering the behavior of tunnel during construction. In this study, the tunnel support pattern optimization method is suggested based on the convergence-confinement method, earth pressure, axial force of rock bolt, and moment acting on the shotcrete. The length and spacing of the rock bolts and the thickness of the shotcrete were optimized by using the differential evolution algorithm (DEA) and the results were compared to the standard support pattern III for railway tunnel. Rock bolt length can be reduced and the installation interval can be widened for shallow tunnel. As the depth of tunnel increases, the thickness of shotcrete increases linearly. Therefore, the thickness of shotcrete should be thicker than the standard support pattern as the depth of tunnel increases to secure the stability of tunnel.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1986

Band 3, the predominent 95,000 dalton anion transport protein, is the major intrinsic glycoprotein of the human erythrocyte membrane. This anion carrier exists as a dimer and binds the cytoskeletons such as spectrin, ankyrin and actin. And the liposomes are vesicular structures which form spontaneouly upon hydration of phospholipids. These artificial lipid vesicles have been investigated as model of the biological membranes and as a mean of improving the delivery of nucleic acids, drugs, proteins and biological substances to specific target tissues and cells. In this study, we were purified Band 3 from the human erythrocyte membrane(ghost) was prepared by hemolysis of intact human erythrocyte with weak alkali-hypotonic solution. Band 6 was removed from ghost by extracting with solution of an ionic strength of 0.15. Band 3 and Band 4 were solubilized selectively by extracting Band 6-depleted ghosts with Triton X-100 under nondenaturing conditions. Band 3 was then purified from Triton X-100 extract treated with p-chloromercuribenzoate by sucrose density gradient ultracentrifugation. This purified Band 3 was incorporated into liposomes prepared by reverse-phase evaporation. Phosphatidyl L-serine and cholesterol(1 : 1 molar ratio) were dissolved in chloroform and then chloroform was removed by rotatory evaporation under reduced pressure. Band 3 solution without Triton X-100 was introduced into a mixture of lipids and diethylether. Diethylether was subsequently removed by evaporation. This purified Band 3 and its incorporation into liposomes were confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

• The Korean Journal of Pharmacology
• /
• v.24 no.1
• /
• pp.135-145
• /
• 1988

Dopamine when given icv induces antidiuresis along with transient natriuretic tendency, and it has been suggested that both subtypes of central dopamine receptors may influence renal function differentially. This study was undertaken to delineate the role of central $D_2$ receptors employing domperidone (DOM), a selective $D_2$ antagonist. DOM icv elicited antidiuresis and antinatriuresis in doses ranging from 15 to $135{\mu}g/kg$. GFR and RPF as well as sodium excretion decreased. Systemic blood pressure increased slightly. Intravenous DOM did not elicit significant changes in sodium excretion. Denervation of the kidney abolished the hemodynamic change induced by icv DOM, but sodium excretion decreased on both innervated and denervated kidneys. No diuretic tendency was uncovered by the denervation. Dopamine, $150{\mu}g/kg$ icv, produced antidiuresis along with decreases in hemodynamics. These effects were not affected by DOM-pretreatment, and no natriuretic tendency was unveiled. Bromocriptine, a $D_2$ receptor agonist, $200{\mu}g/kg$ icv, elicited marked diuresis and natriuresis, which were completely abolished by DOM-pretreatment. Apomorphine, another prototype of $D_2$ agonist, $150{\mu}g/kg$ icv, produced diuresis and natrituresis with increases in renal hemdoynamics, followed by decreases in all parameters. DOM-pretreatment did not affect the renal hemodynamic effects, wherease the increases in urine flow and sodium excretion were markedly reduced by DOM, Present study suggests that central $200{\mu}g/kg$ receptors mediate natriuretic and diuretic influence to the kidney, possibly through mediation of natriuretic humoral factor, and provide further evidence supporting the hypothesis that central $200{\mu}g/kg$ receptors mediate antidiuretic influence via nerve pathway, whereas natriuresis are brought about through mediation of central $200{\mu}g/kg$ receptors.