• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.37-49
• /
• 1999

내화처리 및 재건조가 목재의 역학적 성질에 미치는 영향을 구명하기 위하여 라디에타소나무 변재 무결점 소형 시험편 내로 내화제인 borax-boric acid(BRX), minalith(MIN), pyresote(PYR)를 가압주입한 후 25, 60, 80, $11^{\circ}C$로 재건조한 후 휨성질과 종압축강도를 측정하였다. 내화처리 및 재건조에 의한 라디에타소나무 시편의 역학적 성질 감소 정도는 내화제의 종류, 보유량, 그리고 재건조온도의 조합에 따라 상이하였으며, 내화처리와 재건조온도간에 통계학적으로 매우 높은 유의성을 보이는 상호작용이 존재하였다. 휨강도와 휨파괴시 최대일량은 내화처리에 의해 상당히 감소되었으나 휨탄성계수와 종압축강도는 내화처리에 의해 감소되지 않고 오히려 BRX 처리구의 탄성계수와 BRX 및 PYR 처리구의 종압축강도는 대구조인 무처리구보다 높았다. 몇가지 내화제와 재건조온도의 조합의 휨탄성계수와 종압축강도의 경우를 제외하고는 내화제 보유량간에는 역학적 성질의 차이도 인정되지 않았다. 휨탄성계수와 종압축강도는 재건조온도의 영향을 크게 받지 않는 것으로 나타났다. 그러나 휨강도와 휨파괴시 최대일량은 재건조온도가 증가할수록 일반적으로 감소하였는데, BRX처리구는 재건조온도 $80^{\circ}C$부터, 그리고 MIN과 PYR 처리구는 재건조온도 $110^{\circ}C$에서 대구조와 비교할 때 심각한 휨강도의 감소가 관찰되었다. 따라서 내화처리 라디에타소나무 목재를 구조부재로 사용하기 위해서는 BRX 처리재의 경우는 $60^{\circ}C$, 그리고 MIN과 PYR 처리재의 경우는 $80^{\circ}C$ 이상의 건구온도를 적용하는 것은 삼가야 할 것이다.

• 한국연초학회지
• /
• 제6권1호
• /
• pp.94-96
• /
• 1984

The effects of redrying, steaming, toasting, and drying & cooling chamber in the tobacco manufacturing Process on the mortality of three stages of the cigarette beetle, Lasioderma serricorne F., 1.e. eggs, larvae, and adults, were examined. Mortality of the three stages the cigarette beetle in each process was 100%, respectively.

• 한국산림과학회지
• /
• 제60권1호
• /
• pp.30-36
• /
• 1983

대표적(代表的)인 건축내장재료(建築內裝材料)인 합판(合板)은 가연성(可燃性)이 매우 커서 각종(各種) 대형화재(大型火災)의 요인(要因)이 되고 있다. 따라서 내화합판(耐火合板) 제조(製造)의 필요성(必要性)이 절실(絶實)히 요구(要求)되고 있으며, 이와 관련(關聯)하여 우선적(優先的)으로 해결(解決)해야 할 과제(課題)로서 DAP 처리합판(處理合板)의 재건조(再乾燥)에 관(關)한 연구(硏究)를 수행하였는 바 5.25mm두께의 Meranti합판(合板)을 제2인산(第二燐酸)암모늄(DAP) 20% 수용액(水溶液)에 온냉욕법(温冷浴法)으로, 즉 각각 3, 6, 9 및 12시간(時間) 온냉처리(温冷處理)한 다음 공(共)히 3시간(時間) 냉액침지처리(冷液浸漬處理)하였으며 그 때의 약액흡수량(藥液吸收量)과, 이들 처리합판(處理合板)을 130, 145, 160 및 $175^{\circ}C$의 열판온도(熱板温度)로 건조(乾燥)함으로써 건조곡선(乾燥曲線)과 건조속도(乾操速度)를 고찰(考察)하였다. 그 결과(結果), 온냉욕법(温冷浴法)에 의한 합판(合板)의 약액흡수량(藥液吸收量)은 침지시간(浸漬時間)이 증가(增加)함에 따라 꾸준히 증가(增加)하였고, 수분(水分)의 흡수량(吸收量)이 DAP의 흡수량(吸收量)보다 더 많았으며 DAP 약제보유량(藥劑保有量)은 최단침지처리시간(最短浸漬處理時間)의 경우에도 최저보유량(最低保有量)[$1.125kg/(30cm)^3$]을 상회(上廻)하였다. 한편 내화처리합판(耐火處理合板)의 건조곡선(乾操曲線)은 모든 처리시간(處理時間)에서 수분처리합판(水分處理合板)의 건조곡선(乾操曲線)이 DAP약제처리합판(藥劑處理合板)의 그것보다 경사가 급했으며 열판온도(熱板温度)가 상승(上昇)할수록 건조(乾操)가 급속(急速)히 진행(進行)되어 $160^{\circ}C$를 적용(適用)했을 때는 2.5~4분(分)에 건조(乾操)가 완료(完了)되었다. 건조속도(乾操速度)에 있어서도 대체(大體)로 열판온도(熱板温度)가 증가(增加)할수록 그 값이 증가(增加)하였으며 DAP처리(處理)의 경우는 $175^{\circ}C$ 적용시(適用時), 그리고 수분처리(水分處理)의 경우는 $160^{\circ}C$부터 10%/min 이상(以上)의 건조속도(乾操速度)를 나타내었다.

• 한국연초학회지
• /
• 제13권1호
• /
• pp.61-68
• /
• 1991

The moisture contents of threshed leaf tobacco during aging storage were very important factor for the improvement or deterioration of leaf quality. Decay and carbonization of leaf tobacco were mainly controlled by moisture contents during storage. The influence of moisture contents on the decay and carbonization of threshed leaf tobacco (Flue-Cured, Var. NC 82. AB3O-1 grade) were examined during 1 year. The moisture contents of leaf tobacco were treated to 3 kg as 12% (controle), 16%, 20% and 24% after redrying, respectively, These tobacco were put into center of carton box containing about 200kg with 12%'s tobacco, and then packed and stored from June, 1988 under natural weather condition in warehouse at Ock-Cheon threshing plant. Samples were taken from dissected carton box at 0, 1, 2, 4, 7 and 12 months after moisture treatment and Racking time, and some chemical properties were investigated at every sampling time. In results of inducement to decay and carbonization of leaf tobaccos during 1 year's storage by moisture treatment. decayed leaf was appeared but carbonized leaf did not. Calorification and decayed leaf occurred at high moisture contents above 20%, and these phenomena were appeared between 30 and 150 days after moisture treatment and packing. High moisture content leaves (above 20%) caused nearby other leaves to be sunk with high moisture content. Nicotine and calcium contents were increased to 20%~30% and 10%~22%, respectively, but total sugar contents was decreased to 40%~60% by moisture treatment(20% ~24% ).

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.34-41
• /
• 1990

본 연구는 CCA로 방부(防腐)처리된 Lodgepole pine 각재(角材)의 재건조(再乾燥)시 고온건조법(高溫乾燥法)의 적용이 건조속도(乾燥速度) 및 건조결함(乾燥缺陷)의 발생에 어떻게 영향하는가를 고찰하고자 수행되었다. 고온건조시 건조속도는 통당(通常) 열기건조(熱氣乾燥)시보다 약(約) 2.5배 증가되었으며, 방부처리재의 재건조 속도는 처리전(前)의 전건조속도보다 약간 감소됨을 보였다. 표면할열(表面割裂)의 발생정도(程度)은 전건조시의 경우, 고온건조시 보다 심(甚)하였으나 재건조시에는 건조방법간에 큰 차이가 없었다. 방부제의 침투(浸透)를 도모(圖謀)하기 위하여 자상(自傷)처리(Incising)된 각재의 경우에는 재건조시 절개부(切開部)의 연장(延長)에 의해 할렬의 정도가 증가됨을 보였다. 뒤틀림(Warping)의 발생정도는 고온건조시가 통상 열기건조에 비해 심하지 않았으며, 전(全) 건조과정을 통하여 발생된 뒤틀림은 WWPA가 정(定)해놓은 Lodgepole pine 2등급(等級)(No. 2 grade)의 뒤틀림 허용치(許容値)의 범위내(範圍內)에 있음을 보였다. 결론적(結論的)으로, 고온건조시 증가되는 건조속도와 건조재의 질(質)에 큰 영향을 주지않는 범위내에서 발생되는 건조결함을 고려할 때, Lodgepole pine의 전건조및 CCA 처리후 재건조를 위해 큰 문제없이 고온건조법이 적용될 수 있음을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.54-65
• /
• 1994

This research carried out to investigate the effects of inorganic materials in paper sludge on the thermal degradation and of paper sludge addition on physical and mechanical properties of paper sludge-wood particle mixed boards in comparison with unmodified particleboards. Also these unmodified particleboards and paper sludge-wood particle mixed boards were soaked in aqueous solutions of fire-retardant chemicals(diammonium phosphate and zinc chloride), and their fire retardancy were tested by oxygen index method and ISO ignition test to determine the feasibility of paper sludge, industrial waste, as a recyclable resource in fabrication of fire-resisting panels for building material. Since the redrying of fire-retardant treated particleboards and paper sludge-wood particle mixed boards were made by press drying method, this process was a simple and effective method. On the other hand, flexural bending strength and internal bonding strength were also analysed to evaluate mechanical properties through standard method.

• 한국연초학회지
• /
• 제11권2호
• /
• pp.241-246
• /
• 1989

Mold development on leaf tobacco(Flue-cured, var. NC 82) during the storage was examined according to the initial moisture content(MC) of the tobacco. The initial moisture content of the leaf tobacco was controlled as 12,14,16% after redrying. Those were packed in cardboard boxes and stored in a warehouse. Samples were taken monthly from June of 1988 through August of 1989 and were evaluated for mold development (colony count) and MC. The moisture content change in the leaf tobacco of 12, 14 and 16% initial MC was in the range of 11.1-13.3, 12.8-15.3 and 14.9-16.7% and the mean number of colonies from them were 1.4$\times$102, 1.0$\times$102, and 4.0$\times$102 colonies per gram of tobacco, respectively, however mold-damaged leaf tobacco other than the treatments was occasionally observed to have the colony number as high as 2.3$\times$105 colonies per gram of tobacco. In the meantime, the leaf tobacco was stored at 6 relative humidity levels at $25^{\circ}C$ in laboratory test. Leaf tobacco of 15.0-16.4% MC was maintained without the mold-damage after 80 days of storage whereas those of 19.9, 21.3, 25.5 and 27.1% MC became moldy after 50, 15, 11 and 6 days of storage, respectively.

• 대한한의학회지
• /
• 제17권1호
• /
• pp.329-335
• /
• 1996

Rehmannia Radix is a thick tuberous root about 3-6 cm diameter. The tuberous root is repared for medicine. The material in the fresh state is shengdihuang (生地黃). The material in the dried state is gandihuang (乾地黃). Shudihuang (熱地黃) is made by taking juicy roots, washing them in millet wine, steaming on a willow frame in a percelain vessel, drying, and resteaming and redrying nine times. The aim of this experiments was to investigate the effect of Rehmannia Radix Water extracts on the plasma renin activity and plasma levels of aldosterone and atrial natriuretic peptide (ANP) in rats. The results of study were as follows: Plasma renin activity was not changed after administration of Rehmannia Radix water extracts. Plasma levels of aldosterone was decreased significantly after administration of Shudihuang (熱地黃) water extracts. Plasma levels of atrial natriuretic peptide was increased significantly after administration of Shudihuang (熱地黃) water extracts.

• Journal of the Korean Wood Science and Technology
• /
• 제9권4호
• /
• pp.1-21
• /
• 1981

미송(美松) 및 포푸라 내수합판(耐水合板)을 내장용내화제(內裝用耐火劑)로 가압처리한 다음 저온(低溫), 중온(中溫) 및 고온건조상태(高溫乾燥狀態)에서 재건조(再乾燥)를 실시(實施)하였다. 붕사(硼砂)-붕산(硼酸), 크롬화(化) 염화아연, 미나리스, 파이레소오트 및 일종(一種)의 상업용(商業用) 내화제(耐火劑)로 내화처리(耐火處理)를 실시(實施)하였다. 건조방법(乾燥方法)은 키른건조(乾燥)와 열판건조(熱板乾燥)를 적용(適用)하였으며 건조속도(乾燥速度)와 건조결함(乾燥缺陷)에 관하여 검토(檢討)하였다. 붕사(硼砂)-붕산(硼酸)은 수분처리합판(水分處理合板)과 유사(類似)한 건조속도(乾燥速度)를 나타내었으나 기타(其他)의 내화제(耐火劑)는 일층(一層) 늦은 건조속도(乾燥速度)를 나타내었고 더 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 특(特)히 크롬화(化) 염화아연은 가장 건조속도(乾燥速度)가 느렸으며 가장 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 열판건조(熱板乾燥)는 키른 건조(乾燥)와 비교(比較)하여 같은 온도수준(溫度水準)에서 삼배(三倍)나 더 빨리 건조(乾燥)하였으나 열판압력을 50 $1b/in^2$(3.52$kg/cm^2$)를 적용(適用)하였기 때문에 두께 수축율(收縮率)은 이배(二倍)를 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제12권2호
• /
• pp.3-9
• /
• 1984

This study was carried out to examine the practicality of DAP[$(NH_4)_2HPO_4$] as fire retardant for plywood by static bending test the redried plywoods which had been soaked in 20% $(NH_4)_2HPO_4$ solution. Being hot/cold soaked in the solution for 3/3, 6/3, 9/3 and 12/3 hours and redried by cyclic press-drying method at the platen temp. of 130, 145, 100 and $175^{\circ}C$, the treated plywoods were tested to offer the mechanical data, that is, $S_{pl}$(stress at proportional limit), MOE(modulus of elasticity), MOR(modulus of rupture) and $W_{pl}$(work per unit volume to proportional limit ) in flexure. The results obtained were summarized as follows. 1. $S_{pl}$ of fire retardant treated plywoods ("FRP" would be used hereinafter) decreased as the platen temperature increased, but it was superior to that of non-treated plywoods(Control) at $160^{\circ}C$ or higher. 2. MOE of FRP decreased roughly with the increase of temperature, hut this tendency was not constant. And the value of FRP was higher than that of Control even at $175^{\circ}C$. 3. MOR of FRP showed same temperature-dependent tendency as MOE, but it was influenced more sensitively at the higher temperature. 4. $W_{pl}$ of FRP also decreased gradually with the increase of platen temperature and the value in DAP 9/3 treatment was Jess than 70% of control plywoods. 5. In view of redrying time and mechanical properties, the most reasonable platen temperature for DAP treated FRP was $160^{\circ}C$ in this study.