• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.37-49
• /
• 1999

The effect of fire-retardant treatment and redrying on the mechanical properties of radiata pine sapwood were evaluated. Small, clear specimens were treated with three different fire-retardant(FR) chemicals, borax-boric acid(BRX), minalith(MIN), and pyresote(PYR), with target retentions of 30 and 60kg/$m^3$, and then redried at maximum dry-bulb temperature of $25^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ or $110^{\circ}C$. Each specimen, including untreated and water-treated controls, was tested in static bending and in compression parallel to grain. The extent of strength reduction was dependent on the type of FR chemicals, retention, and redrying temperature, and a highly significant interaction existed between FR treatment and redrying temperature. Modulus of rupture(MOR) and work to maximum load(WML) were significantly decreased by FR treatment and redrying. None of three FR chemicals adversely affect modulus of elasticity (MOE) and maximum crushing strength(MCS). MOE of BRX treatment and MCS of both BRX and PYR treatment increased significantly compared to untreated controls. No significant differences existed between retention levels except for MOE and MCS of some combinations of FR chemicals and redrying temperatures. Although MOE and MCS was not significantly affected by any of the redrying temperatures, these properties were generally decreased with the increase in redrying temperature. The significant reduction in MOR and WML was observed in BRX treatment when dried at temperatures of $60^{\circ}C$ and above, and in MIN and PYR treatment when dried at temperatures of $80^{\circ}C$ and above. Consequently, BRX-treated radiata pine should not be redried at temperatures >$60^{\circ}C$, and MIN- and PYR-treated radiata pine should not be redried at temperatures > $80^{\circ}C$ where bending strength and energy-related properties are important design considerations.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.94-96
• /
• 1984

The effects of redrying, steaming, toasting, and drying & cooling chamber in the tobacco manufacturing Process on the mortality of three stages of the cigarette beetle, Lasioderma serricorne F., 1.e. eggs, larvae, and adults, were examined. Mortality of the three stages the cigarette beetle in each process was 100%, respectively.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.30-36
• /
• 1983

Plywood, the representative interior decorative or structural material, is so inflammable that it may cause big fires. Therefore, it is required inevitably to manufacture the "Fire retardant treated plywood", and it will be a study on the redrying of treated plywood that we ought to solve. This study was carried out to investigate the absorption of 20% $(NH_4)_2HPO_4$ solution into the soaked plywoods by hot/cold soaking for 3/3, 6/3, 9/3 and 12/3 hours and to study drying process with drying curves and drying rates by press-drying at the platen temperature of 130, 145, 160 and $175^{\circ}C$. Solution absorption of plywoods in hot/cold soaking method increased steadily with the prolonged soaking time, and water absorption is higher than DAP absorption, and then chemical retention (DAP) exceeded the minimum retention [$1.125kg/(30cm)^3$] even in the shortest soaking treatment. Drying curves of water-soaked plywoods inclined more steeply than those of DAP soaked plywoods. And the drying proceeded rapidly with the increase in platen temperature and terminated in 2.5-4 minutes at the temperature of 160 and $170^{\circ}C$. Drying rate also increased generally with the increase of platen temperature. So it was at $175^{\circ}C$ in DAP-soaking and at $160^{\circ}C$ in water-soaking when the drying rate became above 10%/min.

• Journal of the Korean Society of Tobacco Science
• /
• v.13 no.1
• /
• pp.61-68
• /
• 1991

The moisture contents of threshed leaf tobacco during aging storage were very important factor for the improvement or deterioration of leaf quality. Decay and carbonization of leaf tobacco were mainly controlled by moisture contents during storage. The influence of moisture contents on the decay and carbonization of threshed leaf tobacco (Flue-Cured, Var. NC 82. AB3O-1 grade) were examined during 1 year. The moisture contents of leaf tobacco were treated to 3 kg as 12% (controle), 16%, 20% and 24% after redrying, respectively, These tobacco were put into center of carton box containing about 200kg with 12%'s tobacco, and then packed and stored from June, 1988 under natural weather condition in warehouse at Ock-Cheon threshing plant. Samples were taken from dissected carton box at 0, 1, 2, 4, 7 and 12 months after moisture treatment and Racking time, and some chemical properties were investigated at every sampling time. In results of inducement to decay and carbonization of leaf tobaccos during 1 year's storage by moisture treatment. decayed leaf was appeared but carbonized leaf did not. Calorification and decayed leaf occurred at high moisture contents above 20%, and these phenomena were appeared between 30 and 150 days after moisture treatment and packing. High moisture content leaves (above 20%) caused nearby other leaves to be sunk with high moisture content. Nicotine and calcium contents were increased to 20%~30% and 10%~22%, respectively, but total sugar contents was decreased to 40%~60% by moisture treatment(20% ~24% ).

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.34-41
• /
• 1990

본 연구는 CCA로 방부(防腐)처리된 Lodgepole pine 각재(角材)의 재건조(再乾燥)시 고온건조법(高溫乾燥法)의 적용이 건조속도(乾燥速度) 및 건조결함(乾燥缺陷)의 발생에 어떻게 영향하는가를 고찰하고자 수행되었다. 고온건조시 건조속도는 통당(通常) 열기건조(熱氣乾燥)시보다 약(約) 2.5배 증가되었으며, 방부처리재의 재건조 속도는 처리전(前)의 전건조속도보다 약간 감소됨을 보였다. 표면할열(表面割裂)의 발생정도(程度)은 전건조시의 경우, 고온건조시 보다 심(甚)하였으나 재건조시에는 건조방법간에 큰 차이가 없었다. 방부제의 침투(浸透)를 도모(圖謀)하기 위하여 자상(自傷)처리(Incising)된 각재의 경우에는 재건조시 절개부(切開部)의 연장(延長)에 의해 할렬의 정도가 증가됨을 보였다. 뒤틀림(Warping)의 발생정도는 고온건조시가 통상 열기건조에 비해 심하지 않았으며, 전(全) 건조과정을 통하여 발생된 뒤틀림은 WWPA가 정(定)해놓은 Lodgepole pine 2등급(等級)(No. 2 grade)의 뒤틀림 허용치(許容値)의 범위내(範圍內)에 있음을 보였다. 결론적(結論的)으로, 고온건조시 증가되는 건조속도와 건조재의 질(質)에 큰 영향을 주지않는 범위내에서 발생되는 건조결함을 고려할 때, Lodgepole pine의 전건조및 CCA 처리후 재건조를 위해 큰 문제없이 고온건조법이 적용될 수 있음을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.54-65
• /
• 1994

This research carried out to investigate the effects of inorganic materials in paper sludge on the thermal degradation and of paper sludge addition on physical and mechanical properties of paper sludge-wood particle mixed boards in comparison with unmodified particleboards. Also these unmodified particleboards and paper sludge-wood particle mixed boards were soaked in aqueous solutions of fire-retardant chemicals(diammonium phosphate and zinc chloride), and their fire retardancy were tested by oxygen index method and ISO ignition test to determine the feasibility of paper sludge, industrial waste, as a recyclable resource in fabrication of fire-resisting panels for building material. Since the redrying of fire-retardant treated particleboards and paper sludge-wood particle mixed boards were made by press drying method, this process was a simple and effective method. On the other hand, flexural bending strength and internal bonding strength were also analysed to evaluate mechanical properties through standard method.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.2
• /
• pp.241-246
• /
• 1989

Mold development on leaf tobacco(Flue-cured, var. NC 82) during the storage was examined according to the initial moisture content(MC) of the tobacco. The initial moisture content of the leaf tobacco was controlled as 12,14,16% after redrying. Those were packed in cardboard boxes and stored in a warehouse. Samples were taken monthly from June of 1988 through August of 1989 and were evaluated for mold development (colony count) and MC. The moisture content change in the leaf tobacco of 12, 14 and 16% initial MC was in the range of 11.1-13.3, 12.8-15.3 and 14.9-16.7% and the mean number of colonies from them were 1.4$\times$102, 1.0$\times$102, and 4.0$\times$102 colonies per gram of tobacco, respectively, however mold-damaged leaf tobacco other than the treatments was occasionally observed to have the colony number as high as 2.3$\times$105 colonies per gram of tobacco. In the meantime, the leaf tobacco was stored at 6 relative humidity levels at $25^{\circ}C$ in laboratory test. Leaf tobacco of 15.0-16.4% MC was maintained without the mold-damage after 80 days of storage whereas those of 19.9, 21.3, 25.5 and 27.1% MC became moldy after 50, 15, 11 and 6 days of storage, respectively.

• The Journal of Korean Medicine
• /
• v.17 no.1 s.31
• /
• pp.329-335
• /
• 1996

Rehmannia Radix is a thick tuberous root about 3-6 cm diameter. The tuberous root is repared for medicine. The material in the fresh state is shengdihuang (生地黃). The material in the dried state is gandihuang (乾地黃). Shudihuang (熱地黃) is made by taking juicy roots, washing them in millet wine, steaming on a willow frame in a percelain vessel, drying, and resteaming and redrying nine times. The aim of this experiments was to investigate the effect of Rehmannia Radix Water extracts on the plasma renin activity and plasma levels of aldosterone and atrial natriuretic peptide (ANP) in rats. The results of study were as follows: Plasma renin activity was not changed after administration of Rehmannia Radix water extracts. Plasma levels of aldosterone was decreased significantly after administration of Shudihuang (熱地黃) water extracts. Plasma levels of atrial natriuretic peptide was increased significantly after administration of Shudihuang (熱地黃) water extracts.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.4
• /
• pp.1-21
• /
• 1981

Exterior grades of Douglas-fir and aspen plywood were impregnated with interior fire-retardant chemicals and redried under low-, intermediate-, and high-temperature drying conditions. Fire-retardant treatments included borax-boric acid, chromated zinc chloride, minalith, pyresote, and a commercial formulation. Drying processes included kiln and press-drying. Evaluated were drying rates and defects generated. The borax-boric acid and the commercial treatments redried at rates similar to water-treated controls. Other salt treatments were significantly slower drying and more defect prone. Chromated zinc chloride treatment was consistently the slowest drying and most defect prone. Press drying was three times faster at an equivalent temperature level. However, thickness shrinkage doubled because of 50 1b/in. platen pressure.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.3-9
• /
• 1984

This study was carried out to examine the practicality of DAP[$(NH_4)_2HPO_4$] as fire retardant for plywood by static bending test the redried plywoods which had been soaked in 20% $(NH_4)_2HPO_4$ solution. Being hot/cold soaked in the solution for 3/3, 6/3, 9/3 and 12/3 hours and redried by cyclic press-drying method at the platen temp. of 130, 145, 100 and $175^{\circ}C$, the treated plywoods were tested to offer the mechanical data, that is, $S_{pl}$(stress at proportional limit), MOE(modulus of elasticity), MOR(modulus of rupture) and $W_{pl}$(work per unit volume to proportional limit ) in flexure. The results obtained were summarized as follows. 1. $S_{pl}$ of fire retardant treated plywoods ("FRP" would be used hereinafter) decreased as the platen temperature increased, but it was superior to that of non-treated plywoods(Control) at $160^{\circ}C$ or higher. 2. MOE of FRP decreased roughly with the increase of temperature, hut this tendency was not constant. And the value of FRP was higher than that of Control even at $175^{\circ}C$. 3. MOR of FRP showed same temperature-dependent tendency as MOE, but it was influenced more sensitively at the higher temperature. 4. $W_{pl}$ of FRP also decreased gradually with the increase of platen temperature and the value in DAP 9/3 treatment was Jess than 70% of control plywoods. 5. In view of redrying time and mechanical properties, the most reasonable platen temperature for DAP treated FRP was $160^{\circ}C$ in this study.