• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.73-79
• /
• 1991

The flavonoids from plants is very widly used as natural dye for food and medicine etc. In this study, red pine which is widespread in Korea was studied to find new chemicals which may use as raw material for the special purpose. The fIavonoids of red pine bark were separated with Sephadex LH-20 and Toyo pearl HW-40F as packed materials and the structure of separated f1avonoids was determined by $^1H$-and $^{13}C$-NMR spectroscopy. The (+) catechin which is widespread in nature and dihydroquercetin-3'-0-${\beta}$-galactoside were found in red pine bark. The dihydroquercetin-3'-0-${\beta}$-galactoside is newly found in this species.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.1-10
• /
• 2006

The objective of this study was to elucidate the microscopic patterns of decay caused by brown-rot fungi of Tyromyces palustri and Gloeophyllum trabeum in Korean red pine (Pinus densiflora) and radiata pine (Pinus radiata) woods through light and electron microscopies. The ultrastructural changes of cell walls attacked by the two brown-rot fungi were compared in this respect. Macroscopically, radiata pine showed more ring and radial checks than Korean red pine. Microscopically, with the progress of decay, spiral checks associated with cross-field pits and bore holes in the cell wall were more remarkably numerous in the radiata pine than in the Korean red pine. In the radiata pine, G. trabeum produced more spiral checks in the cell wall than T. palustris. In the advanced stages of decay by G. trabeum, the erosions of ray cell walls were identified both in the Korean red pine and radiata pine but $S_3$ layers of tracheid walls were eroded only in the Korean red pine.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.79-84
• /
• 2000

It is well-known fact that dimensional stability of wood is greatly enhanced by acetylation of wood. This dimensional stability results from bulking of the reacted acetate within the cell wall, which reduces further swelling when the modified woods come into contact with water or water vapor. The purpose of this research was to determine the water absorption and dimensional stability of the acetylated solid wood in liquid water and in humidity tests. Beech and red oak were acetylated. Moisture and water absorption of acetylated wood were quite dependent on weight percent gain(WPG). Antiswelling efficiency(ASE) was quite dependent on WPG, but was not dependent on species.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.132-139
• /
• 2011

This study examined the characteristics of radio-frequency/vacuum dried Korean red pine ($Pinus$ $densoflora$) heavy timbers with 250 ${\times}$ 250 mm (S), 300 ${\times}$ 300 mm (L) in cross section and 300 mm in diameter, and 3,600 mm in length, which were subjected to compressive loading after a kerf pretreatment. The following results were obtained : The drying time was short and the drying rate was high in spite of the large cross section of specimens. The moisture gradient inall specimens was gentle in both longitudinal and transverse directions owing to dielectric heating. The shrinkage of the width in the direction perpendicular to was 21 percent ~ 76 percent of that of the thickness of square timbers in the direction parallel to the mechanical pressure. The casehardening for all specimens was very slight because of significantly reduced ratio of the tangential to radial shrinkage of specimens and kerfing. The surface checks somewhat severely occurred although the occurrence extent of the surface checks on the kerfed specimens was slight compared withthat on the control specimen.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.37-42
• /
• 1994

The adsorption of water vapor and equilibrium moisture content(EMC) of the specimens for four softwood species dried by conventional- and high temperature method and equilibrated to 15% of the target EMC condition at 25$^{\circ}C$ were determined by oven drying method and with moisture meters. The amount of adsorption for high temperature dried red pine was significantly higher than that of conventional kiln dried wood, while those of eastern white pine, eastern hemlock and Norway spruce were not significantly different between drying methods. EMCs of these four species determined by oven drying method and with capacitive admittance moisture meter were not significantly different between drying methods. EMC of high temperature dried red pine determined with resistance moisture meter was significantly higher than that of conventional kiln dried wood. But EMCs of other species did not show significant difference between drying methods. EMCs of conventional and high-temperature dried wood determined with electronic moisture meters, especially in the case of the capacitive-admittance moisture meter measurement, were lower than that determined by oven drying method.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.96-103
• /
• 2003

국산 주요 침엽수재인 소나무, 잣나무, 낙엽송의 철물접합부 인장하중 특성 구명을 위하여 본 연구를 수행하였다. 철물 접합부의 최대 인장하중은 AA형의 경우 소나무가 3,612 kgf로 낙엽송, 잣나무에 비해 각각 1.2배, 1.7배, EA형의 경우 2,704 kgf로 1.1배, 1.5배 우수하였다. 또한 AA형은 EA형에 비해 3 수종 모두 약 1.2배 이상 높은 인장하중을 나타내었다. 철물접합부의 파괴모드는 주로 이의 빠짐, 철물의 인장파괴와 목재의 전단파괴로 이루어지며, 특히 소나무 접합부는 철물의 인장파괴를 나타내었다. 철물접합부재의 인장하중-변위 특성은 Foschi 모형으로 정확하게 추정할 수 있었으며, 철물접합부의 초기강성은 소나무 접합부재가 높게 나타났다. 국산 침엽수재의 철물접합부에 대한 설계하중은 소나무, 낙엽송, 잣나무의 순으로 높게 나타났으며, AA형의 경우 이당 설계하중이 소나무 25 kgf, 낙엽송 22 kgf, 잣나무 15 kgf이었으며, EA형의 경우 소나무 19 kgf, 낙엽송 17 kgf, 잣나무 13 kgf 이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.695-704
• /
• 2016

충청북도 태안군 안면도와 경상북도 울진군 소광리 지역 소나무재의 물리적 특성과 역학적 특성을 측정하고, 상호상관관계를 분석하였다. 두 지역의 5영급과 9영급 소나무에서 생장코어를 채취하여 방사방향의 연륜폭과 만재율을 측정하였다. 두 지역 모두에서 연륜폭은 수에서 수피까지 감소하는 경향을 나타냈다. 전체 평균 연륜폭은 안면도 지역에서 5영급과 9영급이 각각 2.865 mm, 1.705 mm이고, 소광리 지역에서 5영급과 9영급이 각각 4.764 mm, 2.228 mm로 안면도 지역의 값이 소광리 지역에 비하여 약 23-40% 정도 작았다. 두 지역 모두 연륜폭이 증가함에 따라 만재율은 감소하는 음의 상관관계를 보였다. 강도측정용 시험편에 대하여 소나무재의 물리적 특성과 역학적 특성의 상관관계를 단순회귀분석으로 분석하였다. 만재율과 전건밀도는 서로 양의 상관관계를 보였으며, 통계적으로 유의하였다. 만재율과 역학적 특성은 안면도 소나무재의 휨강도 시험편을 제외하고, 양의 상관관계를 보였으나 통계적으로 유의하지 않았다. 전건밀도와 역학적 특성은 두 지역 모두 양의 상관관계를 보였으나, 소광리 지역 시험편에서만 통계적으로 유의하였다. 안면도 지역의 소나무재의 평균 압축강도와 휨강도는 각각 51.3 MPa와 80.5 MPa로 소광리 지역의 평균 압축강도와 휨강도 37.7 MPa와 63.7 MPa에 비하여 크게 측정되었다. 두 지역 간의 강도 차이는 생장조건의 차이도 있지만, 영급에 의한 연륜폭과 만재율 등의 차이에 의한 결과로 판단된다.

• 펄프종이기술
• /
• 제44권1호
• /
• pp.16-23
• /
• 2012

Use of security papers for monetary papers, gift certificates, and lottery tickets increases every year. As the use of security papers increase, there are more possibility of counterfeits. In this study, we used unique fibers from the sea to increase the difficulties against counterfeiting. The red algae fibers give opacity as much as calcium carbonates, and have unique shape in length ($500{\sim}900\;{\mu}m$) and width ($1{\sim}4\;{\mu}m$) to be discerned from other natural fibers such as wood and cotton fibers. We mixed red algae fibers to wood fibers in a series of fixed ratios to make single and multiply papers for making security papers. Paper with dyed red algae fibers were also used. Paper made without fillers gave enough opacity for printing when red algae fibers were used more than 20% of the fiber furnish. Those properties may allow red algae fibers to be a potential candidate for fiber raw materials of security paper.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.514-534
• /
• 2021

국내 목조건축물을 가해하는 지중 흰개미인 Reticulitermes speratus 군체의 영역 범위 산정을 위한 적정 염색약 선정 및 확산 경향 평가를 실시하였다. Sawdust diet를 이용한 감수성 평가 결과, 염색약의 농도가 증가할수록 섭식량은 감소하지만 보다 진하게 염색되었으며, 생존율은 Neutral Red 0.5%를 제외하고 4주차까지 모든 농도 조건이 대조군과 차이 없이 85% 이상의 생존하였다. 또한 2가지 염색약 모두 0.1% 농도 조건을 제외한 0.2% 이상의 농도 조건에서 11주 동안 염색이 유지되었고 전이력은 염색약 섭식 직후를 제외하고는 없는 것으로 확인되었다. 이에 따라 Nile Blue A와 Neutral Red 모두 0.2% 농도 조건이 R. speratus 군체의 영역 모니터링에 최적의 농도라고 판단된다. 이와 더불어 실내 조건에서 제작된 40m 길이의 foraging arena에 약 25,000마리 군체를 서식시킨 뒤, Nile Blue A와 Neutral Red 0.2% 농도로 각각 염색된 개체를 양 쪽 끝에 방사하여 시간 경과에 따른 확산 경향을 파악하였다. 그 결과 염색 개체가 7일 정도의 기간에 40m 거리까지 점진적으로 확산 이동하여 서로 섞이는 것이 확인되었다. 이를 통해 목조건축물에 유입된 R. speratus 군체를 대상으로 Mark-Release-Recapture(MRR) 법을 이용한 모니터링을 실시할 경우, 군체의 영역 범위를 산정할 수 있으며, 서로 다른 군체의 식별도 가능할 것이다.

• 한국가구학회지
• /
• 제21권1호
• /
• pp.72-82
• /
• 2010

The objective of this study is to identify the species of 17 wooden Buddhist statues of the late Joseon Dynasty (the 17th and 18th century) in Jeollado, southwestern region of Korea. The bodies of statues were made of Ginkgo (Gingko biloba L.: 88%) and alder (Alnus spp.: 12%). The hands of statues were alder(64%), willow (Salix spp.: 27%) and Ginkgo(9%). The bottoms of hollow bodies were covered all with Japanese red-pine (Pinus densiflora S. et Z., 'sonamu') panels. The main species of statue body, Ginkgo tree was known to be introduced to Korea from China with Buddhism. The results indicated that Ginkgo trees of Korea in the 17th century had already become large and rich enough to be used for most of statues. Ginkgo wood has low shrinkage and even texture, which are crucial for carving sculptures. Alder and willow woods used for statue hands have fine and firm textures. The pedestals for these statues were also made of red pine wood. Red pine woods have rather high shrinkage and low hardness, but it is versatile woods strong enough to support heavy statues.