• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.852-857
• /
• 2010

This study was performed to explore the effect of the clay mineral illite on the improvement of bed soil and plant growth. Red pepper (Capsicum annuum L.) was used as a model vegetable crop. The experiment was performed during the whole six weeks in the glass house of the Chungbuk National University. Its seedlings were cultivated in the bed soil normally used for horticultural purpose. Of the seedlings cultured, the healthy and regular size of seed were selected and cultivated in the pots. They were treated with two forms of illite, particulate (PA) and powder (PW), at the following application rates: standard application[P1 (PA1, PW1), 1:20 (w/w)], two times[P2 (PA2, PW2), 1:10 (w/w)], and four times[P4 (PA4, PW4), 1:5 (w/w)] of standard application. Untreatment (P0) was used as a control pot. At six weeks of cultivation, their growth lengths were correspondingly increased as the application rate was increased ranging from P0, P1, P2, and to P4. Their growth length was a little greater on the application of powder illite (PW) than on the particulate illite (PA). Based on the plant analysis for the root, leaf, stem of red pepper, the uptake amounts of K, Ca, and Mg, were correspondingly increased, as the application rate was increased ranging from P0, P1, P2, and to P4, respectively. At the same application rate, their amounts taken up in the respective parts were higher on the application of PW illite than on the PA one. Especially the amounts of Ca and Mg were higher in the stem, leaf than root. Consequently, it appears that the illite treatment, especially, PW form of illite, enhance the growth of red pepper in the glass house during the whole six weeks of experiment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.127-132
• /
• 1992

This experiment was conducted to find out the useful data for upland crop cultivation in the newly reclaimed tidal land. Poseung silty clay loam soil was selected, and cotton(Mogpo VII) and tall fescue were cultivated under different drainage systems and soil ameliorator applications. Soil hardness and bulk density were decreased by subsurface drainage and plastic film installed at 40cm depth of the soil. Red earth application was also effective to loosen the soil, but zeolite and gypsum made the subsoil compact. Water content of the soil was high in surface drain than that of subsurface drain or plastic film curtain plot during dry season. The water content was in order of plastic film curtain, surface drain and subsurface drain. Electrical conductivity(EC) was decreased to lower than 0.4 Simens $meter^{-1}$ ($SM^{-1}$) in the subsurface drain during rainy season, and the EC of subsurface drain was maintained a quater to an half of surface drain. The yield of cotton and tall fescue were high in order of subsurface drain, plastic film curtain and surface drain plot. The yields of cotton were increased to 36-73 % by ameliorator application, and the red earth application was more effective for tall fescue growth compare to gypsum and zeolite.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.100-105
• /
• 2016

In this study we investigated the suitability of horticultural main organic root substrate materials (peatmoss, coir) for the development proper root substrate for working with bulb onion transplanter. We investigated seedling sprout ratio, growth and characteristics (bulk density, root substrate cohesion) those are suitable for mechanical transplanting by mixing with inorganic materials(red clay etc.). Although both seedling growth and root substrate bulk density were similar in peatmoss and coir based root substrates, we found that peatmoss mixing had higher root substrate cohesion compared to coir mixing. We assume that higher cohesion properties of peatmoss based root substrate will give more weight of root part during mechanical transplanting of young onion seedlings in the field. Because of this, we suggest that peatmoss is the appropriate ingredient for developing root substrates for working with bulb onion transplanter.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.268-275
• /
• 2005

Early predictions of crop yields call provide information to producers to take advantages of opportunities into market places, to assess national food security, and to provide early food shortage warning. The objectives of this study were to identify the most useful parameters for estimating yields and to compare two model selection methods for finding the 'best' model developed by multiple linear regression. This research was conducted in two 65ha corn/soybean rotation fields located in east central South Dakota. Data used to develop models were small temporal variability information (STVI: elevation, apparent electrical conductivity $(EC_a)$, slope), large temporal variability information (LTVI : inorganic N, Olsen P, soil moisture), and remote sensing information (green, red, and NIR bands and normalized difference vegetation index (NDVI), green normalized difference vegetation index (GDVI)). Second order Akaike's Information Criterion (AICc) and Stepwise multiple regression were used to develop the best-fitting equations in each system (information groups). The models with $\Delta_i\leq2$ were selected and 22 and 37 models were selected at Moody and Brookings, respectively. Based on the results, the most useful variables to estimate corn yield were different in each field. Elevation and $EC_a$ were consistently the most useful variables in both fields and most of the systems. Model selection was different in each field. Different number of variables were selected in different fields. These results might be contributed to different landscapes and management histories of the study fields. The most common variables selected by AICc and Stepwise were different. In validation, Stepwise was slightly better than AICc at Moody and at Brookings AICc was slightly better than Stepwise. Results suggest that the Alec approach can be used to identify the most useful information and select the 'best' yield models for production fields.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.210-221
• /
• 1995

The purpose of this study was performed to investigate the mineralization and differentiation of osteobalsts for bone regeneration in vitro and the effect of rate of the composition in periodontal cells on mineralization. For this study, healthy gingival tissues were surgically obtained from the patients during 1st premolar extraction for the purposes of orthodontic treament. Gingival tissue was washed several time with Phosphate buffered saline contained high concentration of antibiotics and antifungal agent, and cultured in Dulbecco's Modified Eagle's Medium(DMEM, Gibco, U.S.A.). Every cell were cultured in state at $37^{\circ}C$, 100% of humidity, 5% of $CO_2$ incubator. Bone marrow stromal cells were isolated from 5-clay-old rat femur with using medium irrigation mathod by syringe. Cell suspension medium were centrifuged at 1500 rpm for 5 min and then cultured in the petri dish. Two kinds of cell were freezed and stocked in the liquid nitrogen tank until experiment. Cell were incubated into the 24 multi-well plate with $5{\times}10^4$cell/well of medium at $37^{\circ}C$, 100% of humidity 5% $CO_2$ incubator for 24 hours. After discarded of the supernatent of medium, O.5ml of medium were reapplied and incubated. And counted the number of cell using the hemocytometer and inverted light microscope. We have measured the number of mineralized nodule with using Alizarin red S. staining in microscope. Furthermore every cell were observed the morphological change between every rate of co-culture of the two kinds of cell. The results were as follows; The rate of proliferation of co-culture cell revealed high rate tendency compared the bone marrow stromal cell only and low growth rate to compared with gingival fibroblast only. The tendency of formation of the mineralized nodule were observed dose-depend pattern of bone marrow stromal cell. It is concluded that the gingival fibroblast may inhibit the formation of mineralized nodule in the culture of the bone marrow stromal cell.

• Journal of architectural history
• /
• v.21 no.1
• /
• pp.171-186
• /
• 2012

The objective of this study is to find out the recent trends of hanok design based on 58 hanoks appeared in architecture magazines in the last 10 years. The cases are analyzed in terms of location, size, building form, spatial organization, material, roof form, and the ceiling form of living room. The consequences of this study is as follows; Most of the recent hanoks are built in rural area (91.4%), which shows the hanok is not accepted as an urban house type. Hanoks tend to be built in 2 stories whose 2nd floor is smaller than the 1st floor. (34.5%) The preferred size is total floor area of $99.2{\sim}165.2m^2$ (62.0%), 3 rooms (46.6%) with a traditional ondol room (60.3%). The buildings with ㄱ-shape (43.1%) and linear-shape (27.6%) are preferred, and the compact plan type similar with apartment house appears (13.8%). In the roof design that greatly influences the appearance of building, the traditional design factors such as half-hipped roof (55.2%), double eaves (27.6%), and eaves curve tend to be sustained. In terms of spatial organization, most of recent hanoks have double-layed plan (74.2%). The living room mostly has separately defined space. (82.8%) The indoor and outdoor tend to be connected by a narrow wooden veranda (39.7%), while some cases don't have any wooden floor space (48.3%). The entrance is adopted as an important spatial element in front part of building (75.9%), and it influences the appearance of building. The living room, the counterpart of the wooden floor hall in traditional hanok, and kitchen tend to be interiorized. In terms of material, the cement roof tile and red clay brick are preferred. Consequently, the walls of recent hanoks have the image of brick structure rather than the wooden frame structure of traditonal hanok.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.685-694
• /
• 2010

As a eco-friendly material, Hwangtoh (red clay) has been studied for complete or partial replacement of portland cement. Most of existing studies focused on the material properties of the Hwangtoh concrete including the compressive strength, drying shringkage, and creep. In the present study, the shear strength of the beams made with the Hwangtoh concrete was tested. Further, bond strength of tension re-bars embedded in the Hwangtoh concrete was tested. One of the concrete tested consisted of activated Hwangtoh replacing 20% of the cement. The other consisted 100% activated. Hwangtoh replacing all the cement. The beam specimens were tested under two point static loading. The test result showed that the shear strength of activated Hwangtoh concrete beams replacing 20% and 100% of cement was equivalent to that of the ordinary portland cement concrete beam. However, the bond strength of activated Hwangtoh concrete replacing 100% of the cement was less than that of the ordinary portland cement concrete.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.529-543
• /
• 2003

Deep-sea surface sediments, acquired from 1997 to 2002 in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were analyzed for index and geotechnical properties to provide background information for the design of manganese nodule minor. The sediments were classified into 16 types based on the measured properties and evaluated in terms of miner maneuverabillity and potential environmental impacts arising from mining activities. It was found that the middle part of the study area covered with coarse siliceous sediments is more favorable to the commercial production than the northern part of pelagic red clay. In particular, Area B2 in the middle part is considered the best mining site since it shows the highest abundance as well as it consists mostly of normally to over consolidated (types B, C, D) coarse siliceous sediments that are appropriate for effective minor movement and accompany weak environmental impacts. Taking account of all the analyzed core logs, the average shear-strength values are proposed as a practical guideline fur movements of a manganese nodule miner: 6.0 kPa at 10cm and 7.0kPa at 40cm below the seabed.

• Applied Biological Chemistry
• /
• v.15 no.2
• /
• pp.143-162
• /
• 1972

Based on the concentration of $^{40}K$ naturally occurring radioisotope of potassium, a method for the determination of total potassium in soils and plants was developed. The method was extended to evaluate the potassium supplying power of soils by taking the ratio of exchangeable potassium to total potassium $(K_{ex}/K_t)$, termed the potassium buffering capacity. Using this as index, it was observed that the release of potassium from soil fellows the from order reaction. A linear relationship was found between the potassium buffering capacity and the release constant of potassium or mica content of the clay. Similarly the potassium buffering capacity was also closely correlated with total uptake of potassium by rice plant. Hence it is concluded that the method for determining of the potassium buffering capacity could be veil applied to characterize the potassium availability of soils. The method for the determination of potassium is characterized by (1) The efficient measurement of the weak beta activity emissions from the samples, (2) identification of $^{40}K$, (3) calculation of total potassium content using the proportional constant of $^{40}K$ of samples to that of the standard. Difference in the potassium supplying power of soils due to soil types was also evaluated with the use of this technique. The degree of the potassium supplying power was in the order of soil types as red-yellow podzolic and lateric soils, basaltic materials(Rvd)> low-humic gley and alluvial soils, alluvial plains and food plains(Apa)> low-humic gley soils, nearly level to sloping local alluvial plains and slopes(Afb)> low-humic gley and alluvial soils, fluvio-marine plains (Fma).