• 한국토양비료학회지
• /
• 제43권6호
• /
• pp.852-857
• /
• 2010

점토광물 일라이트를 이용하여 고추의 생육증진 효과를 평가하기 위하여 2010년 충북대학교 첨단원예 유리온실에서 시험을 수행 하였다. 시험은 상토를 이용하여 수행하였으며 일라이트 처리는 기준량 처리 1:20 (w/w), 2배량 처리 1:10 (w/w), 4배량 처리 1:5 (w/w)의로 처리하였으며 재배기간 동안 수분공급 이외에 다른 영양성분은 일체 공급하지 않았다. 고추는 대촌을 선택하여 실험하였으며 작물의 양이온 K, Ca, Mg의 흡수량을 측정하여 일라이트 처리에 따른 효과의 차이를 평가하였다. 6주간의 생육 특성을 비교 해본 결과 고추는 무처리구 대비 1~21%의 생장이 증가함을 보였다. 처리량에 따른 고추의 뿌리, 줄기, 잎에서의 무처리구 대비 처리구의 흡수량은 K가 무처리구 대비 뿌리에서 -0.09-32%, 줄기 34-85%, 잎에서 29-110%, Ca는 뿌리에서 -12-29%, 줄기 49-120%, 잎에서 22-86%, Mg의 뿌리는 -0.3-56%, 줄기 40-128%, 잎은 31-155%의 차이를 보였다. 또한 고추 대촌은 일라이트 처리량에 따라 양분흡수량이 증가한다는 것을 확인할 수 있었으며 이로 인하여 고추의 생장의 차이가 발생하였다고 사료된다.

• 한국토양비료학회지
• /
• 제25권2호
• /
• pp.127-132
• /
• 1992

간척지(干拓地)에서 밭작물재배에 필요한 자료를 얻고져 포승(浦升) 미사질식양토(微砂質埴壤土)에서 표면배수(表面排水), 암거배수(暗渠排水), 40cm 깊이 프라스틱막설치등(膜設置等)의 상이한 배수조건(排水條件)에서 토양개량제(土壤改良劑)인 객토, 석고, 제오라이트를 처리하여 면화(棉花)와 목초(牧草) 재배하면서 토양특성(土壤特性)과 작물(作物) 수량(收量)을 조사 분석하였다. 토양(土壤)의 경도(硬度)와 가비중(假比重)은 암거(暗渠) 및 프라스틱막설치(膜設置)로 낮아졌으며, 개량제별로는 객토처리구(客土處理區)가 효과적이었고, 석고와 제오라이트 처리는 10cm 이하(以下) 깊이의 가비중(假比重)을 높게 하였다. 토양수분함량(土壤水分含量)은 건조시에 암거배수(暗渠排水) 및 프리스틱막설치구(膜設置區)보다 표면배수구(表面排水區)에서 높았으며 강우시에는 프라스틱막설치구(膜設置區)에서 가장 높았다. 토양용액(土壤溶液)의 전기전도도(電氣傳導度)(EC)는 암거배수구(暗渠排水區)에서 강우시에는 $0.4SM^{-1}$이하(以下)로 떨어지고 전기간을 통하여 표면배수(表面排水)에 비(比)하여 1/2-1/4의 낮은 수준을 유지하였다. 면화수량(棉花收量)은 암거구(暗渠區), 프라스틱막설치구(膜設置區), 표면배수(表面排水)의 순이었으며, 암거구(暗渠區)의 제오라이트 및 석고(石膏) 처리(處理)는 생육이 가장 양호하였으며, Tall fescue수량(收量)은 암거구(暗渠區)의 객토처리(客土處理)에서 높았고 염농도(鹽濃度)와 목초(牧草) 및 면화수량(棉花收量)은 고도의 유의성 있는 상관이 있었다.

• 생물환경조절학회지
• /
• 제25권2호
• /
• pp.100-105
• /
• 2016

양파 정식기 작업에 적합한 상토 개발을 위해 원예용 유기질 주재료(피트모스, 코이어)의 적합성을 조사했다. 유기질 재료를 무기질 재료(황토 등)와 혼합하여, 묘 출현율, 생육 및 기계정식 적응 특성 등을 조사하였다. 조사 결과 피트모스 혼합 처리구, 코이어 혼합 처리구 모두 묘 출현율, 생육 및 상토 용적밀도에서 유사했으나, 피트모스 혼합 처리구가 코이어 혼합 처리구에 비해 더 높은 상토 응집성을 보였다. 피트모스 혼합 상토의 높은 응집성은 양파 묘 정식 시 뿌리부 무게 증가 등의 효과를 가져와서 정식기 작업 효율성을 증진시키는데 도움을 줄 수 있을 것이라고 생각된다. 이러한 이유로, 양파 정식기 작업에 적합한 상토 개발 시 피트모스를 유기질 주재료로 선정하는 것이 적합하다고 최종 판단하였다.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• 한국작물학회지
• /
• 제50권4호
• /
• pp.268-275
• /
• 2005

Early predictions of crop yields call provide information to producers to take advantages of opportunities into market places, to assess national food security, and to provide early food shortage warning. The objectives of this study were to identify the most useful parameters for estimating yields and to compare two model selection methods for finding the 'best' model developed by multiple linear regression. This research was conducted in two 65ha corn/soybean rotation fields located in east central South Dakota. Data used to develop models were small temporal variability information (STVI: elevation, apparent electrical conductivity $(EC_a)$, slope), large temporal variability information (LTVI : inorganic N, Olsen P, soil moisture), and remote sensing information (green, red, and NIR bands and normalized difference vegetation index (NDVI), green normalized difference vegetation index (GDVI)). Second order Akaike's Information Criterion (AICc) and Stepwise multiple regression were used to develop the best-fitting equations in each system (information groups). The models with $\Delta_i\leq2$ were selected and 22 and 37 models were selected at Moody and Brookings, respectively. Based on the results, the most useful variables to estimate corn yield were different in each field. Elevation and $EC_a$ were consistently the most useful variables in both fields and most of the systems. Model selection was different in each field. Different number of variables were selected in different fields. These results might be contributed to different landscapes and management histories of the study fields. The most common variables selected by AICc and Stepwise were different. In validation, Stepwise was slightly better than AICc at Moody and at Brookings AICc was slightly better than Stepwise. Results suggest that the Alec approach can be used to identify the most useful information and select the 'best' yield models for production fields.

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.210-221
• /
• 1995

The purpose of this study was performed to investigate the mineralization and differentiation of osteobalsts for bone regeneration in vitro and the effect of rate of the composition in periodontal cells on mineralization. For this study, healthy gingival tissues were surgically obtained from the patients during 1st premolar extraction for the purposes of orthodontic treament. Gingival tissue was washed several time with Phosphate buffered saline contained high concentration of antibiotics and antifungal agent, and cultured in Dulbecco's Modified Eagle's Medium(DMEM, Gibco, U.S.A.). Every cell were cultured in state at $37^{\circ}C$, 100% of humidity, 5% of $CO_2$ incubator. Bone marrow stromal cells were isolated from 5-clay-old rat femur with using medium irrigation mathod by syringe. Cell suspension medium were centrifuged at 1500 rpm for 5 min and then cultured in the petri dish. Two kinds of cell were freezed and stocked in the liquid nitrogen tank until experiment. Cell were incubated into the 24 multi-well plate with $5{\times}10^4$cell/well of medium at $37^{\circ}C$, 100% of humidity 5% $CO_2$ incubator for 24 hours. After discarded of the supernatent of medium, O.5ml of medium were reapplied and incubated. And counted the number of cell using the hemocytometer and inverted light microscope. We have measured the number of mineralized nodule with using Alizarin red S. staining in microscope. Furthermore every cell were observed the morphological change between every rate of co-culture of the two kinds of cell. The results were as follows; The rate of proliferation of co-culture cell revealed high rate tendency compared the bone marrow stromal cell only and low growth rate to compared with gingival fibroblast only. The tendency of formation of the mineralized nodule were observed dose-depend pattern of bone marrow stromal cell. It is concluded that the gingival fibroblast may inhibit the formation of mineralized nodule in the culture of the bone marrow stromal cell.

• 건축역사연구
• /
• 제21권1호
• /
• pp.171-186
• /
• 2012

The objective of this study is to find out the recent trends of hanok design based on 58 hanoks appeared in architecture magazines in the last 10 years. The cases are analyzed in terms of location, size, building form, spatial organization, material, roof form, and the ceiling form of living room. The consequences of this study is as follows; Most of the recent hanoks are built in rural area (91.4%), which shows the hanok is not accepted as an urban house type. Hanoks tend to be built in 2 stories whose 2nd floor is smaller than the 1st floor. (34.5%) The preferred size is total floor area of $99.2{\sim}165.2m^2$ (62.0%), 3 rooms (46.6%) with a traditional ondol room (60.3%). The buildings with ㄱ-shape (43.1%) and linear-shape (27.6%) are preferred, and the compact plan type similar with apartment house appears (13.8%). In the roof design that greatly influences the appearance of building, the traditional design factors such as half-hipped roof (55.2%), double eaves (27.6%), and eaves curve tend to be sustained. In terms of spatial organization, most of recent hanoks have double-layed plan (74.2%). The living room mostly has separately defined space. (82.8%) The indoor and outdoor tend to be connected by a narrow wooden veranda (39.7%), while some cases don't have any wooden floor space (48.3%). The entrance is adopted as an important spatial element in front part of building (75.9%), and it influences the appearance of building. The living room, the counterpart of the wooden floor hall in traditional hanok, and kitchen tend to be interiorized. In terms of material, the cement roof tile and red clay brick are preferred. Consequently, the walls of recent hanoks have the image of brick structure rather than the wooden frame structure of traditonal hanok.

• 콘크리트학회논문집
• /
• 제22권5호
• /
• pp.685-694
• /
• 2010

지금까지 환경 친화적 재료로서 황토에 관한 연구는 포틀랜드 시멘트를 부분적 대체하거나, 완전 대체하는 연구로 진행되어 왔다. 기존의 대부분의 연구에서는 압축강도, 건조수축, 크리프 등 황토 콘크리트의 역학적 성질에 초점이 맞춰졌다. 이 연구에서는 황토 콘크리트로 제작된 보 실험체의 전단강도를 실험하였다. 또한 황토 콘크리트에 정착된 인장 철근의 부착강도를 실험하였다. 이번 실험에서 시멘트를 20% 대체하는 활성 황토와 시멘트를 100% 대체하는 활성 황토를 사용한 콘크리트가 사용되었다. 실험 결과, 시멘트 20% 대체 활성 황토와 무시멘트 활성 황토 콘크리트 보의 전단 강도는 일반 포틀랜드 시멘트 콘크리트 보와 동등하였다. 반면에, 무시멘트 활성 황토 콘크리트의 부착 강도는 일반 포틀랜드 시멘트 콘크리트보다 작았다.

• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.529-543
• /
• 2003

Deep-sea surface sediments, acquired from 1997 to 2002 in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were analyzed for index and geotechnical properties to provide background information for the design of manganese nodule minor. The sediments were classified into 16 types based on the measured properties and evaluated in terms of miner maneuverabillity and potential environmental impacts arising from mining activities. It was found that the middle part of the study area covered with coarse siliceous sediments is more favorable to the commercial production than the northern part of pelagic red clay. In particular, Area B2 in the middle part is considered the best mining site since it shows the highest abundance as well as it consists mostly of normally to over consolidated (types B, C, D) coarse siliceous sediments that are appropriate for effective minor movement and accompany weak environmental impacts. Taking account of all the analyzed core logs, the average shear-strength values are proposed as a practical guideline fur movements of a manganese nodule miner: 6.0 kPa at 10cm and 7.0kPa at 40cm below the seabed.

• Applied Biological Chemistry
• /
• 제15권2호
• /
• pp.143-162
• /
• 1972

Based on the concentration of $^{40}K$ naturally occurring radioisotope of potassium, a method for the determination of total potassium in soils and plants was developed. The method was extended to evaluate the potassium supplying power of soils by taking the ratio of exchangeable potassium to total potassium $(K_{ex}/K_t)$, termed the potassium buffering capacity. Using this as index, it was observed that the release of potassium from soil fellows the from order reaction. A linear relationship was found between the potassium buffering capacity and the release constant of potassium or mica content of the clay. Similarly the potassium buffering capacity was also closely correlated with total uptake of potassium by rice plant. Hence it is concluded that the method for determining of the potassium buffering capacity could be veil applied to characterize the potassium availability of soils. The method for the determination of potassium is characterized by (1) The efficient measurement of the weak beta activity emissions from the samples, (2) identification of $^{40}K$, (3) calculation of total potassium content using the proportional constant of $^{40}K$ of samples to that of the standard. Difference in the potassium supplying power of soils due to soil types was also evaluated with the use of this technique. The degree of the potassium supplying power was in the order of soil types as red-yellow podzolic and lateric soils, basaltic materials(Rvd)> low-humic gley and alluvial soils, alluvial plains and food plains(Apa)> low-humic gley soils, nearly level to sloping local alluvial plains and slopes(Afb)> low-humic gley and alluvial soils, fluvio-marine plains (Fma).