• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.110-110
• /
• 1998

GaN는 직접천이형 에너지 캡을 가지며 In과 화합물을 형성할 경우 1.geV-3.4eV까지 다양한 에너지 캡을 가지므로 청색 발광소자 고출력소자 고온 전자소자둥 웅용성이 많 은 물절로서 각광을 받고 있다. 그러나 G랴‘에 적합한 기판이 없다는 문제점으로 인하여 F FET, LD와 같은 다양한 구조의 웅용에 제 약이 따랐다. 이에 본 연구에서는 RF(radio frequency) Plasma-Assisted MBE( molecular beam e epitaxy )를 이용하여 InxGaj xN/G암J 양자우물 구조를 성장하였다. 이렇게 성장된 I InxGaj xN 박막과 InxGaj xN/GaN 양자우물구조의 특성의 분석은 광학적 특성올 PL( p photoluminescence ) , 결 정 성 의 분석 은 XRD ( x-ray diffraction ), 표면 과 단변 의 계 변 특성은 SEM(scanning electron microscopy)을 이용하여 분석하였다. 저온 PL의 측정결 과 기판온도를 680$^{\circ}$C로 고정한 후 In cell의 온도를 650$^{\circ}$C에서 775$^{\circ}$C까지 증가함에 따라 I InxGaj xN에 관계된 피크위치가 약3이neV정도 red shift 함을 관찰할 수 있었다. 한편 I InxGaj xN/GaN 양자우물구조의 경우 PL피크가 3.2없eV로써 InxGaj- xN의 PL 피크에 비 해 에서 약 25me V 고에너지 이동이 관측되었으며 이것은 우불 내에서 에너지레벨의 c confinement효과에 의해 에너지의 변화에 의한 것엄올 확인하였으며, 양자우물 구조에서 우물의 두께를 줄임에 따라 변화 폭은 1이neV정도 고에너지 이동을 관찰할 수 있었다. X XRD 측정의 결과 In의 mole fraction에 따라 격자상수의 변화를 관찰하였으며, 결정 성의 변화를 피크의 세기로 관찰하였다 .. XRD로 판단한 In의 mole fraction은 0.2임을 알 았다 .. SEM 측정은 표변과 단면의 측정으로서 표연특성과 단면의 특성을 InxGaj xN, I InxGaj xN/GaN 양자우물 구조 모두 알아보았다. 측정 결과 InxGaj-xN의 성 장조건으로 기판온도가 낮아지면서 표면의 거칠기 정도가 증가하였으며,680$^{\circ}$C의 기판온도에서 성장 한 양자우물 구조에 있어서 매끄라운 표면올 얻올 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.111-116
• /
• 1992

ZnS:Sm, F TFEL devices with double insulating layer are prepared by e-beam evaporation method. Electroluminescence and luminous efficiency of the device fabricated at various conditions are investigated. The main transitions on the emission spectra for ZnS:Sm, F TFEL device occur at$^4G_{5/2}\to^6H_{9/2}^4G_{5/2}\to^6H_{7/2}, \;^4G_{5/2}\to^6H_{5/2}\to$.Among them, the dominant spectral line and its corresponding transition occur at $^4G_{5/2}\to^6H_{9/2}$(650 nm) and results in an orange-red emission color. The optimum concentration and substrate temperature for the ZnS:Sm, F TFEL device are around 1 wt% and $200^{\circ}C$. Luminous efficiency for the device is the largest at optimum condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.78-78
• /
• 2011

수열합성법을 이용하여 Si(111) 기판에 ZnO 박막을 성장하였다. ZnO 박막의 성장을 위한 씨앗층은 plasma-assisted molecular beam epitaxy (PA-MBE)를 이용하였다. 씨앗층의 표면 거칠기(root-mean-square roughness)는 2.5 nm이고, 씨앗층 위에 성장된 ZnO 박막은 다양한 크기의 입자들로 이루어져 있었으며 두께는 약 $1.8{\mu}m$로 매우 일정하였다. 배향성을 알아보기 위하여 texture coefficient (TC)를 계산해 보았다. TC(100)과 TC(200)은 a-축 배향성을, TC(002)는 c-축 배향성을 나타내는데, c-축으로 더 우세한 배향성(99.5%)을 보였다. TC 비율(TCa-axis/TCc-axis)은 열처리 온도를 $700^{\circ}C$까지 올렸을 때, 점차적으로 증가하였고, 그 이상의 열처리 온도(< $900^{\circ}C$)에서는 급격히 감소하였다. 잔류응력과 Zn와 O의 bond length도 유사한 경향을 보였다. $700^{\circ}C$까지 열처리 온도가 증가함에 따라, 잔류응력은 증가하였고 bond length는 감소하였다. Near-band-edge emission (NBE)의 피크 강도는 열처리 온도가 $700^{\circ}C$까지 증가함에 따라 점차적으로 증가하였다. 열처리 온도가 $800^{\circ}C$ 이상 증가함에 따라 deep-level emission (DLE)가 적색편이(red-shift)하였다. $700^{\circ}C$로 열처리를 한 ZnO 박막이 가장 우세한 (002)방향의 배향성을 보였을 뿐만 아니라 가장 큰 발광효율 증가를 보였다.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.566-574
• /
• 2015

We report for the first time highly efficient trans-reflective color filters capable of demonstrating coloration in both transmission and reflection modes by taking advantage of a multilayer stack consisting of MgF₂ and TiO₂ used respectively as the low and high index materials. In order to enable such trans-reflective performance, securing an optimal stop band assuming an appropriate bandwidth within the visible regime is pivotal, which was realized by tailoring the thicknesses and the numbers of TiO₂-MgF₂ bi-layers. Three devices were designed through rigorous simulations and developed via e-beam evaporation to demonstrate vivid blue, green, and red colors in the reflection mode, and yellow, magenta, and cyan colors in the transmission mode, featuring an enhanced efficiency exceeding 90% under normal incidence. The color performance of the filters was examined by referring to the chromaticity coordinates of the transmission and reflection spectra, alongside photographed color images. The dependence of the performance on the angle of incidence was explored with respect to incident polarization, indicating that a transmission surpassing 60% could be stably maintained up to an angle of 75°. Polarization independent transfer characteristics were especially achieved for the normal incidence. The proposed devices may be readily extended to other spectral regimes by adjusting the thicknesses of the films.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.4
• /
• pp.210-219
• /
• 2007

The benthic marine algal flora and community structure were examined at five sites of the Taean Peninsula, Korea, during July-August 2005. Ninety-six algal species were Identified, including 14 green, 21 brown, and 60 red algae, and 1 marine plant. The common species that occurred at the five sites were Sargassum thunbergii, Gelidium divaricatum, Caulacanthus okamurae, Gracilavia vermiculophylla, and Neorhodomela aculeata. Sthunbergii was the dominant species in terms of coverage and biomass at ail of the study sites. The average biomass varied from $23.72g/m^2$ in dry weight at Chaeseokpo to $66.43g/m^2$ at Padori. The species could be divided into six functional groups in terms of morphological characteristics: 41 coarsely branched forms, 25 filamentous forms, 16 sheet forms, 7 thick leathery forms, including the marine plant Phyllospadix iwatensis, 4 crustose forms, and 3 Jointed calcareous forms. The seaweed communities at the five study sites were unstable and the environmental conditions were bad or very bad. Among the five study sites, the ecological evaluation index (EEI) and diversity index (H') were maximal at Padori at 2.29 and 1.98, respectively. By contrast, the dominance index (DI) was minimal at Padori (0.55) and maximal at Baramarae (0.96). Therefore, we conclude that the rocky shore at Padori has the best environment among the five study sites, although the species richness and biomass of seaweeds have declined continuously over the last 10 years.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.46-51
• /
• 1990

Laser plasma was generated by a 1GW iodine photodissociation laser ($\lambda$=1.315$\mu\textrm{m}$, E=12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in a vacuum chamber under 1D-sTorr and several tens of laser shooting were necessary for sufficient exposure for the PBS resist of 111m thickness. Aluminium was coated on the top of the resist by 0.1$\mu\textrm{m}$ thickness which acts as an X-ray filter to cut off the visible and the ultraviolet lights. A bio-specimen was put directly on the aluminium coated resist and located at a distance of 3 cm from the X-ray source. The replicas of a steel mesh, spider's web. and a red blood cell were obtained by this technique and were observed by Nomarski microscope and SEM. The limitation of its resolution is determined by the X-ray source size and Fresnel diffraction effect, and its theoretical prediction is well matched with the experimental results. In this experiment, a resolution better than 0.1$\mu\textrm{m}$ could be obtained. ained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.17-17
• /
• 1998

Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.125-136
• /
• 2023

Before progress was recently made in the application of temporary anchorage devices (TADs) in bio-mechanical design, orthodontists were rarely able to intrude molars to reduce upper posterior dental height (UPDH). However, TADs are now widely used to intrude molars to flatten the occlusal plane or induce counterclockwise rotation of the mandible. Previous studies involving clinical or animal histological evaluation on changes in periodontal conditions after molar intrusion have been reported, however, studies involving human histology are scarce. This case was a Class I malocclusion with a high mandibular plane angle. Upper molar intrusion with TADs was performed to reduce UPDH, which led to counterclockwise rotation of the mandible. After 5 months of upper molar intrusion, shortened clinical crowns were noticed, which caused difficulties in oral hygiene and hindered orthodontic tooth movement. The mid-treatment cone-beam computed tomography revealed redundant bone physically interfering with buccal attachment and osseous resective surgeries were followed. During the surgeries, bilateral mini screws were removed and bulging alveolar bone and gingiva were harvested for biopsy. Histological examination revealed bacterial colonies at the bottom of the sulcus. Infiltration of chronic inflammatory cells underneath the non-keratinized sulcular epithelium was noted, with abundant capillaries being filled with red blood cells. Proximal alveolar bone facing the bottom of the gingival sulcus exhibited active bone remodeling and woven bone formation with plump osteocytes in the lacunae. On the other hand, buccal alveolar bone exhibited lamination, indicating slow bone turnover in the lateral region.

• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.81-86
• /
• 2007

The cone-beam CT (CBCT) which is acquired using on-board imager (OBI) attached to a linear accelerator is widely used for the image guided radiation therapy. In this study, the effect of respiratory motion on the quality of CBCT image was evaluated. A phantom system was constructed in order to simulate respiratory motion. One part of the system is composed of a moving plate and a motor driving component which can control the motional cycle and motional range. The other part is solid water phantom containing a small cubic phantom ($2{\times}2{\times}2cm^3$) surrounded by air which simulate a small tumor volume in the lung air cavity CBCT images of the phantom were acquired in 20 different cases and compared with the image in the static status. The 20 different cases are constituted with 4 different motional ranges (0.7 cm, 1.6 cm, 2.4 cm, 3.1 cm) and 5 different motional cycles (2, 3, 4, 5, 6 sec). The difference of CT number in the coronal image was evaluated as a deformation degree of image quality. The relative average pixel intensity values as a compared CT number of static CBCT image were 71.07% at 0.7 cm motional range, 48.88% at 1.6 cm motional range, 30.60% at 2.4 cm motional range, 17.38% at 3.1 cm motional range The tumor phantom sizes which were defined as the length with different CT number compared with air were increased as the increase of motional range (2.1 cm: no motion, 2.66 cm: 0.7 cm motion, 3.06 cm: 1.6 cm motion, 3.62 cm: 2.4 cm motion, 4.04 cm: 3.1 cm motion). This study shows that respiratory motion in the region of inhomogeneous structures can degrade the image quality of CBCT and it must be considered in the process of setup error correction using CBCT images.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.550-563
• /
• 2000

This study was carried out in order to elucidate the fundamental data on the taste compounds between wild and cultured fishes produced on Chungmu and Wando at the southern coast areas of Korea. For this purpose, the food components of cultured fishes such as red sea bream Pagnus major, Sebastes pachycephalus and flounder, Paralichthys olivaceus being spot lighted for the main sea fish, the staple food and high economic fish were investigated and compared with those of the wild ones. There was a little appreciable difference in the proximate compositions of all the species from localities between wild and cultured fishes. But according to the growing conditions, wild fishes were higher in moisture contents and lower in crude lipid content than those of cultured fishes and little difference was seen in protein and ash contents between the two. With regard to the nucleotides and their related compounds, i.e. ADP, IMP and inosine were detected but ATP and hypoxanathine were not from them. On the other hand, there were little difference in the total taste compounds of all the species from localities and the growing conditions between wild and cultured fishes. But all the species were higher in IMP content. The total of seventeen amino acids were detected in samples. The highly contents of glutamic acid, lysine, aspartic acid, proline, leucine, alanine, valine and alginine were showed and less low contents of cystein, histidine, methionine, tyrosine and phenylalanine were detected. The total amino acids of the others were much alike in that composition. Little difference was seen from localities and the growing conditions between wild and cultured ones. The free amino acids were much alike in that composition of all the species. There was little difference in the free amino acid compositions all the species from localities and the growing conditions between wild and cultured fishes. But taurine was dominant, showing from 39% to 65% of the free amino acid content and it is followed by hydroxyproline, lysine, alanine and glycine in other. There were differences in the organic acid compositions of all the species from localities and the growing conditions between wild and cultured fishes. In addition, cultured fishes were more abundant in the total organic acid compositions than those of wild ones.