• Food Science of Animal Resources
• /
• v.20 no.1
• /
• pp.30-35
• /
• 2000

The method used to remove cholesterol from egg by using $beta$-cyclodextrin was relatively stable and efficient. The aim of this study was to cost down by recycling $\beta$-cyclodextrin used to remove cholesterol from egg yolk because $\beta$-cyclodextrin was expensive. The solvents used to separate $\beta$-cyclodextrin from $\beta$-cyclodextrin complex containing egg yolk cholesterol were butanol, chloroform, ether, hexane, methanol, 2-propanol and their mixture. The ratio of solvent and complex varied from 2 : 1 to 10 : 1. The condition of mixing time and temperature varied from 30 to 60$^{\circ}C$ and from 10 minutes to 3 hours to remove cholesterol from $\beta$-cyclodextrin complex. When the ratio of choloroform and methanol was 1 : 1, the removal efficiency of cholesterol was 98.8%. The efficiency of cholesterol removal was improved when the ratio of solvent : complex increased to 4 : 1. When mixing time and temperature was up to for 1hr, at 50$^{\circ}C$ respectively, the efficiency of cholesterol removal improved to 99%. It concluded that the efficiency of cholesterol removal of 50% renewed one contained $\beta$-cyclodextrin were 81.1% while the cholesterol removal efficiency of 100% renewed $\beta$-cyclodextrin was 24% if cholesterol removal efficiency of new $\beta$-cyclodextrin were 100%.

• Journal of Dairy Science and Biotechnology
• /
• v.25 no.1
• /
• pp.9-13
• /
• 2007

The present study was carried out to examine the effect of crosslinked ${\beta}$-cyclodextrin(${\beta}$-CD) made by adipic acid on cholesterol removal rate and find the structural change after recycling on SEM observation. The size reduction and morphological changes were found during the recycling process and the profound changes were observed at 8th time reuse. After cholesterol removal in milk, the used crosslinked ${\beta}$-CD was washed for cholesterol dissociation and reused. In recycling study, the cholesterol removal rate at first trial was 92.5% in milk, which was mostly same as that using new crosslinked ${\beta}$-CD(92.4%). With repeated 10th reuse of crosslinked ${\beta}$-CD resulted in 81.4% of cholesterol removal in milk. Similar trend was found in cream and cholesterol removal was 91.5% at 1st trial and 83.4% at 10th trial. In both milk and cream samples, the removal rate at 1st reuse was not significantly different from that at 6th reuse(p>0.05). The present study indicated that crosslinked ${\beta}$-CD made by adipic acid resulted in the effective recycling efficiency, especially up to 6th reuse and morphological modifications were not distinguishable up to 8th reuse.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.45-50
• /
• 2006

This study was performed to evaluate the air lift reactors (ALR) by variations of HRT and recycling rate. Air lift reactor was composed of bioreactor and clarifier above it. To remove organic matters and nitrogen through the formation of microbic film and filtration, bio-filter reactors were filled with clay, glass, bead, waste plastic, respectively. Influent wastewater was fed to biofilter reactor, and effluent wastewater from bio-filter reactor was injected ALR again, instead of adding external carbon source. Effluent BOD concentration was satisfied with lower than 10 mg/L in recycling rate 100% regardless of the variation of HRT and the kinds of media materials. In HRT 4 hr, recycling rate 100%, BOD removal efficiency rate was from about 85 to 90%, COD removal efficiency rate was higher than 90%. Effluent TN concentration was satisfied with less than 20 mg/L, if HRT was maintained by over than 6 hr regardless of recycling rate and media materials. Over than HRT was 4 hr, microbes concentration in air lift reactor was maintained over than 2,500 mg/L constantly, not sensitive to environmental condition, and organic removal was effective as it was higher.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.49-55
• /
• 2022

In the present study, the thermodynamic evaluation of the sulfate-roasting process was conducted to extract vanadium from the Korean vanadium titano-magnetite ore. The leaching efficiency of vanadium and other impurities was analyzed for varying roasting temperatures and addition of Na₂SO₄. In the case of sulfate roasting, the roasting temperature was 200 ℃ higher than that previously observed Na₂CO₃ roasting. However, the higher leaching efficiency of vanadium and lower leaching efficiency of other impurities, such as aluminum and silicon, were observed. The high selectivity for the extraction of vanadium in sulfate roasting would result from the reaction mechanism between SO₂ gas and vanadium concentrate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.32-40
• /
• 2001

It is desirable to reduce the amounts of fresh water and reuse the recycled water in papermaking process. In an attempt to improve the efficiency of recycling water refining treatment and to enhance the productivity of OCC recycling mill, up flow anaerobic sludge blanket(UASB) reactor was developed and introduced to Korea recently. In order to maximize the operating efficiency and minimize the adverse side effects it is imperative to estimate and evaluate the total effects of new system, UASB on the whole OCC recycling process. This study was carried out with a view to investigate the effects of the high temperature and alkalinity of process water on the quality ad productivity of testliner of OCC recycling mill which is equipped with UASB reactor and almost closed. Another object of this study was searching for the best available use of UASB treated process water. The results were as follows; Reuse of UASB treated water characterized with high temp and alkalinity was useful to improve the strength and drainage properties of recycled OCC owing to its good points of promoting OCC disintegration and reducing the calcium hardness of process water. However, it might not be avoidable to induce the increase of dissolved solids in process water in accordance with direct introducing of UASB treated water into the former stage of OCC stock preparation. So it would be advisable to adopt the UASB treated water in the stage of clean, screened OCC stock.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.585-591
• /
• 2020

In accordance with the government's expansion of solar power generation, the installation of solar panels is expected to expand in Korea. On the other hand, policy discussions on the establishment of a domestic post-management system for waste from photovoltaic power are insufficient. This study estimated the benefit-cost of solar PV Panel recycling and derived the implications for the photovoltaic waste policies in Korea. Overall, the profitability of the recycling project is very low when the project execution period is 10 years. On the other hand, the economic efficiency of the project can be sufficiently high when the duration of the solar panel recycling project is extended to 20 years. In the short term, it is challenging to expect voluntary companies to enter this recycling business because of low economic efficiency. Therefore, it is necessary to prepare various policies to improve the economic efficiency of the recycling business. In conclusion, the following policy implications for PV panel recycling activation are proposed: i) legislation for the recycling of waste solar photovoltaic panel, ii) designation of Association for Solar Panel waste monitoring, and iii) expansion of R & D and the development of various business models related to solar recycling.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.661-662
• /
• 2006

This paper introduces a CMOS clock driver that shows a high efficiency of electric power (lower power consumption) with the supply of lower voltage(VDD), by taking advantage of charge recycling technology. Comparing with the existing structure, this driver showed the improved maximum efficiency of electric power; 72% and 68%, with the supplied voltage of 1.8v and 1.2v, respectively. Since the output waveform shows the tri-state operating region, utilization is expected in the digital integrated circuits.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.39-47
• /
• 2014

PURPOSES : This study aimed to analyze economic effect of recycled aggregate production on job-site airport pavement. METHODS : The validation of site recycling for waste concrete as economic efficiency is analyzed through the case study of site recycling at an O airport pavement construction. The break-even point for the cost of site recycling was estimated according to two different waste concrete processing methods such as job-site recycling and processing on commission (or plant). RESULTS : Job-site recycling cost decreases as the use rate of job-site recycled concrete aggregate increases, or the amount of concrete waste increases, but transporting distance decreases. It was shown in an O airport case that as the use rate of job-site recycled concrete aggregate exceeds 61.4 %, the job-site recycling cost is cheaper than the processing cost on commission. CONCLUSIONS : The results of this study can utilize basic data of feasibility for site recycling of waste concrete on airport pavement construction.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.252-256
• /
• 2001

The rapid development of communication equipment and information processing technology has led to a constant improvement in cordless communication. Lithium ion batteries used in cellular phones and laptop computers, in particular, have been in the forefront of the above revolution. These batteries use high value added raw materials and have a high and stable energy output and are increasingly coming into common use. The development of the material for the negative terminal has led to an improvement in the quality and efficiency of the batteries, whereas a reduction in the cost of the battery by researching new materials for the positive anode has become a research theme by itself. These long life batteries, it is being increasingly realized, can have value added to them by recycling. Research is increasingly being done on recycling the aluminum case and the load casing for the negative diode. This paper aims to introduce the current situation of recycling of lithium ion batteries. 1. Introduction 2. Various types of batteries and the situation of their recycling and the facts regarding recycling. 3. Example of cobalt recycling from waste Lithium ion secondary cell. 3-1) Flow Chart of Lithium ion battery recycling 3-2) Materials that make a lithium ion secondary cell. 3-3) Coarse grinding of Lithium ion secondary cell, and stabilization of current discharge 3-4) Burning 3-5) Grinding 3-6) Magnetic Separation 3-7) Dry sieving 3-8) Dry Classifying 3-9) Content Ratio of recycled cobalt parts 3-10) Summary of the Line used for the recovery of Cobalt from waste Lithium ion battery. 4. Conclusion.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.24-33
• /
• 2015

This study aims to suggest wastewater treatment options for diaper recycling by identifying characteristic analysis of wastewater from diaper recycling process and efficiency evaluation of wastewater treatment units. The wastewater characteristic analysis showed that the concentration of organic pollutants and ionic materials were very high comparing to seawater. Through the investigation of similar wastewater treatment, six treatment units were identified to reduce pollutants. It is found UF(ultra-filtration), DAF(dissolved air flotation), fenton oxidation, electro-coagulation and chemical-coagulation are effective in reducing organic pollutants while membrane system and ion exchanger are effective in reducing ionic materials. Even though the target of water quality should be secured in terms of managing organic pollutants level, the application of treatment unit for reducing ionic material needs lots of considerations. This result suggests that reuse of pulping wastewater after controlling organic pollutants is better than direct discharge of pulping wastewater. To select the appropriate wastewater treatment unit, an economic analysis about operation condition, wastewater flow, cost, efficiency should be considered.