• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1729-1734
• /
• 2009

About 40 million automotive vehicles all over the world and 0.55 million in Korea were retired from use annually. Every nation is desperate to decrease environmental pollution by ELVs(End of Life Vehicles) and try to tighten the regulations. Europe passed laws requiring OEMs to increase vehicles' recovery and reuse rate to 95% by 2015 from current 84%. The ferrous parts, 75% of total automobile weight, are almost recycled whereas the remaining 25% of the non-metal -predominantly plastics as well as form, glass and rubber- and the non-ferrous materials -copper, nickel and aluminium- end up in landfills. The recycling status of non-ferrous materials represented by copper and nickel is reviewed and how much the recycling rate will be improved is calculated.

• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.240-247
• /
• 2005

Today's hightech society requires thousands of different products which ultimately result in billions of tons of materials discarded, most of which end up in landfills. Therefore industrial circles could not help thinking about environmental problems by regulations of government or pressures of consumer. Generally, the related research subjects are classified into both of environmentally conscious manufacturing and product recovery, where product recovery aims to minimize the amount of waste sent to landfills by recovering materials and parts from old or outdated products by means of recycling and remanufacturing (including reuse of parts and products). In this research, we constructed a model for remanufacturing various goods using a single facility and developed a dynamic programing(DP) algorithm based upon the optimal solution characterization. We showed the efficiency of the developed DP algorithm with a numerical example.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.63-69
• /
• 1996

Korean cabbage waste is produced in huge amounts in the process of dealing, and most of them are discarded imposing burden on our environment. In case of Garakdong agricultural and marine market in Seoul, the daily average amount of Korean cabbage waste is estimated more than 355ton(64.1% of the overall amount in waste occurrence). Recycling the cabbage waste is important for the protection of environment and reuse of waste materials. We examined the present situation of occurrence of the cabbage wastes, normal properties of the dietary fiber, and the conversion of high value-added dietary fiber from the cabbage wastes. As a result of examination of the content of dietary fiber in Korean cabbage waste, we found that the dietary fiber content(2.5%) was higher than the known value(0.7%), and that in the process of extraction of dietary fiber, there was no significant difference between the samples added with amylase and protease compared to control.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.1
• /
• pp.1-15
• /
• 2019

The purpose of this study is to develop ICT utilization learning materials for a chapter titled 'Environment Friendly Clothing and Reform of Clothing' in technology and home economics textbooks for Year 2 students in middle school. The research methods were selected from ten types of junior high school technology textbooks, which were revised in 2009, and mainly focused on items such as jeans, shirts, shirts, cardigans, and skirts, Using selected textiles and basic design t-shirts, five works were made using structural and decorative details. The results of this study are as follows. First, textile products shown in the chapter 'Environment Friendly Clothing and Reform of Clothing' are most commonly worn and found in daily life. With regard to a reuse method, structural changes to clothing are proposed. For example, cases relating to the changing of a neckline or the use of a shirt or a sleeve are presented. There are some decoration methods adapted in reuse; using ornaments, such as spangles and emblems, patchwork, shirring and the constucting of collages. Second, following the plan, 5 items are designed with T-shirts, shirts, cardigans and skirts. For the T-shirt design, other fabrics including organza and neoplan are used from design point of view, in addition to reused textile products. Detailed structural changes of necklines, sleeves and collars and detailed and the ornamentation method including shirring, smoking, patchwork and collages are used. Third, this study proposes 6 categories (profile, design planning, diagram, reused textile product, production method and order and pictures of T-shirts developed) under the title of 'T-shirt Made Out of Disposed Clothing', selecting a blog as active teaching and learning material as a part of the ICT utilization in educational settings.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.225-229
• /
• 2001

There are about 41% (by weight) of scrap tires were pulverized to produce rubber powder and granules in the tire recycling industry of Taiwan. However, the reuse of the by-products, steel and fiber, of the scrap tires still needs to be improved. It is difficult to remove the remaining rubber on the surface of steel or fiber. This problem reduce the availability for further reuse of steel and fiber. In addition to the improvement of magnetic, gravity separation techniques or carbonization process, using cryogenic shredding process to separate rubber and fiber (or steel) had been used as another alternative. Cryogenic shredding process for scrap tires showed many advantages, the objective of this paper is to explore the mechanisms for the cryogenic shredding process of scrap tires. Cryo-SEM is used to investigate the topographic information, in-situ, from room temperature to -195$^{\circ}C$ . One square inch shredded tire chips are prepared for SEM study. The percentage of the shrinkage of rubber is also estimated, ca. 6.7%. Mechanisms of cryogenic shredding effects on the tire chips are discussed. The proper practice of cryogenic shredding process far scrap tires is also suggested.

• Journal of the Korean Society of Costume
• /
• v.60 no.10
• /
• pp.65-79
• /
• 2010

Each season, many clothing companies dump small pieces of fabrics left over from making samples. Since fabrics do not decompose easily, this results in environmental pollution. This research was done to discover effective ways to reuse these fabric remnants. As most of these remnants were not large enough for making clothes, fashion accessories was chosen as the design object. Four steps of design development process followed: information research & analysis, prototype design & sample making, market testing, final design decision. After market research and trend analysis, four neck decoration wear -- scarf & muffler(SM). collar & cape(CC), vest & top(VT), and necklace(NE) -- were selected as final product types. 45 designs arose, and 120 items with variations in fabric materials and colors were produced as samples. The three main themes (multiple. reversible, cross) were applied throughout all of the design items. Samples were evaluated from the reactions of the consumers through a 10-day sale at a retail store. Based on the sales record and customers' opinions, five designs from each of the product types SM, CC, and VT were picked out as final designs. In conclusion, fashion accessories turned out to be a more appropriate item to reuse fabric remnants from clothing companies than clothes were, because they necessitate small fabric size and the limitation in fabrics could be compensated with creative design ideas.

• Resources Recycling
• /
• v.10 no.1
• /
• pp.56-65
• /
• 2001

Chemical decontamination techniques have been employed to reuse the high cost check valves contaminated with radioactivity and to reduce the radiation exposure during the inspection and maintenance work of safety injection system containing check valves. After chemical decontamination, an ultrasonic treatment was conducted to remove the fine solid particles retained in the crevices of check valves. The decontamination process conditions and the amount of chemical reagents were determined from the results of a pre-test, using the (list arm holder. The decontamination factors (DF), estimated from the activity in the solution, ranged from 14.5 to 18.5 corresponding to the activity removal of 93-95ft. The corrosion test data indicated that the general corrosion rate during a chemical decontamination-ultrasonic treatment process are low for type 304 S tainless steel, Inconel -600 and Stellite-6 materials $ (2.1\times10^{-2}$ $6.0\times10^{-2}$ and$ 1.7\times10^{-2}$ mil, respectively).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.219-220
• /
• 2021

It is considered that the construction industry is one of the pivotal players in the national economy in terms of Gross Domestic Production (GDP) and employment. Behind the positive role of this industrial sector to the national economy, the construction industry generates approximately 50 % of the total waste generation from all the industrial sectors. There are several measures to mitigate the adverse impacts of the construction waste such as reduce, reuse and recycle. Recycling would be one of the effective strategies for waste minimisation, which would be able to reduce the demand upon new resources as well as enhance reusing the construction materials on sites. The automated construction waste classification system would make it possible not only to reduce the amount of labour input but also mitigate the possibility of errors during the manual classification process. In this study, we proposed an automated waste segmentation and classification system for recycling the construction and demolition waste in the real construction site context. Since the practical application to the real-world construction sites was one of the significant factors to develop the system, a YOLACT (You Only Look At CoefficienTs) algorithm was chosen to conduct the study. In this study, it is expected that the proposed system would make it possible to enhance the productivity as well as the cost efficiency by reducing the manpower for the construction and demolition waste management at the construction site.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.204-210
• /
• 2004

Though the recycling rate of coal fly ash generated from domestic thermoelectric power plants is gradually increased, at present, the most amount of coal bottom ash is disposed by a landfill instead of recycling. Therefore, to reuse a coal bottom ash as high-value materials the synthesis of zeolite made from a coal bottom ash was investigated in this study. NaPl, hydroxy-sodalite and tobermorite were produced through the alkaline hydrothermal reaction of pulvelized bottom ash at various temperatures; 80, 120, $150^{\circ}C$, and the concentration of NaOH at the range from 1 to 5 M. Especially, NaPl with excellent cation exchange capability had a high crystallinity at ${\leq}2$ M NaOH and ${\leq}120^{\circ}C$.