• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.543-550
• /
• 2009

This study was performed to prove the possibility of utilizing short plastic fibers made for recycled polyethylene terephthalate (RPET) as a structural material. In order to verify the capacity of RPET fiber, it was compared with polypropylene (PP) fiber, most widely used short synthetic fiber, for fiber volume fraction of 0%, 0.5%, 0.75%, and 1.0%. To measure material properties such as compressive strength, split tensile strength, appropriate tests were performed. Also, to measure the strength and ductility capacities of reinforced concrete (RC) member casted with RPET fiber added concrete, flexural test was performed on RC beams. The results showed that compressive strength decreased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. Split cylinder tensile strength of RPET fiber reinforced concrete increased slightly as fiber volume fraction increased. For structural member performance, ultimate strength, relative ductility and energy absorption of RPET added RC beam are significantly larger than OPC specimen. Also, the results showed that ultimate flexural strength and ductility both increased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. The study results indicate that RPET fiber can be used as an effective additional reinforcing material in concrete members.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.233-244
• /
• 2009

A new bridge scour countermeasure using geobags and recycled aggregates which is more stable and economical than existing methods is proposed, and its stability was verified through material tests. PP short staple nonwoven geotextile and PET long staple nonwoven geotextile produced in Korea were selected, and a series of strength tests and a test of hydraulic characteristics were conducted to determine a suitable geotextile for geobags. A series of leaching test was also conducted to assess the potential environmental risk of recycled concrete produced in Korea when it is utilized as a material for protecting bridge piers against scour.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.14-20
• /
• 2012

In this paper, the flame-retardant wall paper was successfully prepared with recycled polyethylene terephthalate (PET) short cut fiber with flame-retardant property and wood pulp using polyvinyl alcohol (PVA) as binder followed by treatment of non-halogen flame retardant. Physical properties such as formation index, tensile strength, elongation, and burst strength increased as defibrillation increased except tear strength. Bulk increased but formation index, tensile strength, elongation and burst strength decreased along with addition of PET short cut fiber. It was also found that tear strength rose significantly up to 30% of PET short cut fiber and then declined (fell) rapidly. As addition level of PVA increased tensile strength, elongation and burst strength increased, but tear strength decreased slightly. Addition of 20% of PET short cut fiber and 13% of PVA provided the flame-retardant wall paper with both improved flameproofing and physical properties.

• Advances in concrete construction
• /
• v.12 no.6
• /
• pp.461-467
• /
• 2021

Polyethylene-terephthalate (PET) from bottle waste and linear low-density polyethylene (LLDPE) from barrels and tanks waste are widely available and need to be recycled. Recycling them in concrete and mortar is an alternative solution for their disposal. In this study various quantities of sand (5%, 10%, 15% and 20%) were substituted by powder from LLDPE waste. In addition, PET waste fibers (corrugated, straight) were added to the mortar with different percentages (0.5%, 1%, 1.5% and 2%) of cement mass. This paper evaluate the mechanical and physical properties of the composites in fresh (workability, air content and density) and hardened state (compressive and flexural strength, water absorption and total shrinkage). From the experimental results, it can be concluded that the strengthening in tensile of the mortar with plastic waste corrugated fibers is improved. Other important results are that the water absorption and the density rate are less than that of the ordinary mortar.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.70-70
• /
• 2011

최근 산업 발달에 의한 환경문제와 석유자원 감소에 따라 섬유시장에는 Eco-friendly 바람이 강하게 불고 있으며 리싸이클 제품이 급부상하고 있다. 폴리에스터계 고분자 제품, 그 중에서도 PET 병의 재자원화를 살펴보면 기계적, 열적으로 처리하여 물질을 바꾸지 않고서 회수하는 방법인 Mechanical Recycling과 원료를 분해하여 회수하는 방법인 Chemical Recycling이 있다. 이러한 리싸이클을 통하여 에너지 절감, 저탄소, 유해물질 감소, 환경정화 및 폐기물 감소로 환경부하가 완화되며, 자원의 효율적 재사용이 가능하다. 리싸이클 PET 섬유제품은 의류 인테리어용과 같은 한정된 용도뿐만 아니라 자동차용 부품소재 및 내장 부품 등 산업용으로도 사용가능하다. 본 연구에서는 리싸이클 PET로 제직한 직물에 정련과 호발가공을 하여 이러한 전처리에 따른 물리적 열적 특성의 변화를 비교 분석하였다. 그 결과 정련과 호발가공을 한 리싸이클 PET 직물의 인장 인열 강도가 미처리 직물과 비교하여 감소하는 결과를 보였으며 마모 파열강도는 큰 차이를 보이지 않았다. 반면에 TGA와 DSC를 이용한 열분석 결과 열적 특성 및 결정화도는 일부 차이를 나타내었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.152-159
• /
• 2010

Recently, the public interest in eco-friendly material and structure has been increasing and many Hwang-toh researches are being actively performed. Hwang-toh is one of the traditional environment friendly construction materials used as a construction and plastering material. Hwang-toh has many advantages as construction material due to its high heat storage capacity, auto-purification, antibiotic ability, and infrared ray emission characteristics. But, currently it has not been developed into construction material and used in modern construction due to its low strength and dry shrinkage cracking prone characteristics. According to the recent researches and study results, Hwang-toh can be used as a natural pozzolanic material like fly-ash or pozzolan. In this study, mechanical properties and structural flexure behavior experiments of slag, recycled PET fiber, and Hwang-toh added concrete are carried out. The test results showed that drying shrinkage of concrete mixed with Hwang-toh has lower compressive strength and elastic modulus than those of control cement concrete specimen, but it has the similar flexural behavior in reinforced concrete beams.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.133-142
• /
• 2022

The increased production and consumption of polyethylene terephthalate (PET)-based products over the past several decades has resulted in the discharge of countless tons of PET waste into the marine environment. PET microparticles resulting from the physical erosion of general PET wastes end up in the ocean and pose a threat to the marine biosphere and human health, necessitating the development of new technologies for recycling and upcycling. Notably, enzyme-mediated PET degradation is an appealing option due to its eco-friendly and energy-saving characteristics. PETase, a PET-hydrolyzing enzyme originating from Ideonella sakaiensis, is one of the most thoroughly researched biological catalysts. However, the industrial application of PETase-mediated PET recycling is limited due to the low stability and poor reusability of the enzyme. Here we developed the whole-cell catalyst (WCC) in which functional PETase is attached to the outer membrane of Escherichia coli. Immunoassays are used to identify the surface-expressed PETase, and we demonstrated that the WCC degraded PET microparticles most efficiently at 30℃ and pH 9 without agitation. Furthermore, the WCC increased the PET-degrading activity in a concentration-dependent manner, surpassing the limited activity of soluble PETase above 100 nM. Finally, we demonstrated that the WCC could be recycled up to three times.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.73-73
• /
• 2012

본 연구에서는 리싸이클 방법에 따른 리싸이클 폴리에스터사의 물리적 성질을 고찰하고자 하였다. 시료로는 물리적 리싸이클 방법과 화학적 해중합을 통한 리싸이클 방법을 사용한 폴리에스터사를 사용하였다. 리싸이클 폴리에스터사의 표면 형상을 관찰하기 위해 SEM을 이용하였고, 열적 거동을 규명하기 위해 DSC를 이용하였으며, 미세 구조적 차이를 살펴보기 위해 XRD 분석을 하였고, 역학적 성질을 평가하기 위해 인장강도와 절단신도를 측정하였다. 연구 결과, 리싸이클 방법에 따라 Tg, 결정화 온도, 융점과 융해열은 약간의 차이를 보였다. 화학적 리싸이클 PET사는 Virgin PET사보다 Tg가 약간 상승하였고, 승온 시 결정화 온도는 하강하였으며, 융점의 차이는 거의 없는 것으로 나타났다. 이는 해중합에 의해 PET의 비결정영역의 고분자 사슬 간의 거리가 좁아져 더 높은 Tg를 나타내는 것으로 생각된다. 또한, 물리적 리싸이클 PET사의 융점과 융해열은 화학적 리싸이클 PET사의 융점과 융해열보다 더 높게 나타났다. 결정화도에서는 리싸이클 방법에 따른 차이는 거의 보이지 않았다. 이는 리싸이클 공정이 폴리에스터의 결정영역 변화에는 유의한 영향을 미치지 않았기 때문인 것으로 생각된다. 실의 인장강도는 리싸이클 PET사는 virgin PET사보다 약간 더 낮았고, 물리적 리싸이클 PET사와 화학적 리싸이클 PET사는 비슷하게 나타났고, 절단신도는 virgin PET사, 물리적 리싸이클 PET사와 화학적 리싸이클 PET사 간의 뚜렷한 차이는 없는 것으로 나타났다.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.92-97
• /
• 2003

The purpose of this study is heavy metal absorption of recycled PET(poly ethylene terephatalate) NWF(non woven faric). The results of test are summarized as follows; Heavy metal abworption rates in Ni ions were higher then Zn and Cu ions, whereas heavy metal absorption rates by sulfonation times were not different. The heavy metal absorption times have a higher tendency from 60 min to 120 min. There were significant negative correlations among the amount used CSA(Chloro Sulfuric Acid) and the amount of absorption Zn(r = -0.33784, p < 0.05), Cu(r = -0.61177, p < 0.01) ions, whereas correlations between heavy metal absorption rates and sulfonation times were not significant. There were significant positive correlations among the amount of absorption Zn ions and the amount of absorption Ni(r = 96475, p < 0.014), Cu(r = 0.51614, p < 0.01) ions, likewise the positive correlations between the amount of absorption N ions and the amount of absorption Cu(r = 0.54766) ions were significant(p < 0.01).

• Resources Recycling
• /
• v.12 no.5
• /
• pp.16-22
• /
• 2003

Lightweight aggregate for concrete was manufactured from recycling the waste PET bottles (PET Bottle Lightweight Aggregate, LAPET). The qualities of LAPET and its mortar were investigated. Specific gravity and unit weight of LAPET was very low in comparison with river sand like as 1.39, 844 kg/㎥ respectively. In addition, compressive strength of concrete significantly decreased because of specific gravity of aggregate decreased with increases in containing ratio. When LAPET was contained to 25% and 50％ of river sand, compressive strength of concrete at 28 days was indicated more 30MPa. Most of LAPET was generally showed to round shape and fluidity of mortar increased significantly due to sleeking the surface texture of LAPET. On the other hand, capillary absorption of mortar with LAPET was greatly increased in comparison with that of mortar without LAPET because of LAPET was composed of singular gradation. Absorption of LAPET was 0％ because the interior structure of LAPET consists of PET like as organic high polymer. Therefore the fault of normal lightweight aggregate, absorption, will be improved. It could expect several advantages that the pollution of environment will be previously prevent and the waste resources could be recycled if LAPET is reused as aggregate for Lightweight concrete.