• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.21-29
• /
• 2024

In this study, EMC(Epoxy molding compound) waste from the semiconductor molding process is recycled and synthesized into silica nanoparticles, which are then applied as abrasive materials contains CMP(Chemical mechanical polishing) slurry. Specifically, silanol precursor is extracted from EMC waste according to the ultra-sonication method, which provides heat and energy, using ammonia solution as an etchant. By employing as-extracted silanol via a facile sol-gel process, uniform silica nanoparticles(e-SiO₂, experimentally synthesized SiO₂) with a size of ca. 100nm are successfully synthesized. Through physical and chemical analysis, it was confirmed that e-SiO₂ has similar properties compared to commercially available SiO₂(c-SiO₂, commercially SiO₂). For practical CMP applications, CMP slurry is prepared using e-SiO₂ as an abrasive and tested by polishing a semiconductor chip. As a result, the scratches that are roughly on the surface of the chip are successfully removed and turned into a smooth surface. Hence, the results present a recycling method of EMC waste into silica nanoparticles and the application to high-quality CMP slurry for the polishing process in semiconductor packaging.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.112-130
• /
• 2006

In order to improve the waste management system for the unit of small villages, we visited 14 counties nationwide and investigated the present conditions of the farming and fishing villages on waste management. First, we selected one concentrated residential type village and one separated residential type village. Then we investigated the quantities and the characteristics of the domestic wastes generated from the 2 sample villages that we chose early on. The concentration of 7 heavy metals in open burned residuals was analyzed. The results are as follows: (1) We distributed the 799 questionnaires to public servants (83 Gun, 716 Myon) and 337 questionnaires to residents. In accordance with a result of questionnaire on the Volume-Based Waste Fee System, the rate of participated questionnaire was 70.3% from public servants and 31.8% from residents. (2) From the survey on two chosen villages, the generation of municipal waste was 48.6g/person/day in A Village, 54.3g/person/day in B Village. This amount was smaller than that of national average of 1.05kg because of excluding recyclable wastes and some of incinerated combustible waste. (3) The 14 counties entered the aged society. There were 2 aging societies, 8 aged societies and 4 super-aged societies. And the average ratios of Public financial independence and waste budget of financial independence were 16.1% and 17.9% respectively. These are lower than that of national average of 57.2% and 31.4%. This indicates that these factors seemed to be operated with the hindrance insettling Volume-Based Waste Fee System in the small villages.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.81-88
• /
• 2018

This study analyzed the characteristics of 6 recyclable bulking agents which can replace sawdust and rice hulls that are commonly used in livestock manure composting. The content of all the hazardous chemicals found in the bulking agents used in this experiment was between 0.0 and 34.1 ppm, which was noticeably lesser than the maximum content levels of hazardous substances 5.0~900.0 ppm prescribed by the Rural Development Administration(RDA), which means that the bulking agents would be able to replace sawdusts and rice husks. The water content of the bulking agents ranged from a minimum of 12.4% to a maximum of 16.6% in the original state, which was much less than 60%, the optimal moisture content. These results indicate that they would be able to function fully as bulking agents. Their water absorption rate was in the range of minimum 31.9% ~ maximum 600.0%, which showed huge differences among the types of bulking agents. The most appropriate bulking agent in terms of water absorption rate was wood pellets. It was the highest in the wood briquette manufactured by A, which was followed by C and B in the order. The shear strength of the 5 types of bulking agents in the original state was 271.7 N on an average, the highest figure of all, except for the oak briquette whose shear strength could not be measured and the wood pellets in the absorption state. The shear strength in the dry and absorption states then followed, and were 78.0 N and 27.7 N on an average, respectively. The wood briquette of A recorded considerably lower shear strength than that of B and C. Overall, shear strength tended to increase according to lower water absorption rates. Since pine wood chips and oak cuts have relatively greater shear strength even in the absorbing state than the other materials, they will be able to endure some power in the case of stirring with pig droppings.