• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.110-115
• /
• 2011

A modern optical fiber manufacturing process requires the sufficient cooling of glass fibers freshly drawn from the heated and softened silica preform in the furnace, since the inadequately cooled glass fibers are known to cause improper polymer resin coating on the fiber surface and to adversely affect the product quality of optical fibers. In order to greatly enhance the fiber cooling effectiveness at increasingly high fiber drawing speed, it is necessary to use a dedicated glass fiber cooling unit with helium gas injection between glass fiber drawing and coating processes. The present numerical study features a series of three-dimensional flow and heat transfer computations on the cooling gas and the fast moving glass fiber to analyze the cooling performance of glass fiber cooling unit, in which the helium is supplied through the discretely located rectangular injection holes. The air entrainment into the cooling unit at the fiber inlet is also included in the computational model and it is found to be critical in determining the helium purity in the cooling gas and the cooling effectiveness on glass fiber. The effects of fiber drawing speed and helium injection rate on the helium purity decrease by air entrainment and the glass fiber cooling are also investigated and discussed.

• Fisheries and Aquatic Sciences
• /
• 제16권4호
• /
• pp.279-283
• /
• 2013

We tested the effects of various distillers dried grains (DDGs) in a formulated diet on growth and body composition of juvenile sea cucumber Apostichopus japonicus. DDG is a solid residue obtained by filtering an aqueous mixture of fermented rice with Aspergillus oryzae and yeasts. Six isonitrogenous and isocaloric diets (DDG0, DDG-G, DDG-C, DDG-K, DDG-W, and DDG-P) were formulated to contain 20% DDG obtained from different Makgeolli factories. Juvenile sea cucumber (average weight, $2.1{\pm}0.02$ g) were randomly distributed in eighteen 50-L rectangular plastic tanks (40 L of water each) in a seawater flow-through system at a density of 50 juveniles/tank. Three replicate groups of sea cucumber were fed each of the six experimental diets at a feeding rate of 5% body weight per day for 22 weeks. At the end of the feeding experiment, survival and weight gain of the juvenile sea cucumber were not affected by the type of dietary DDG (P > 0.05), and the proximate and amino acid compositions of the whole body were not affected by dietary DDG diets (P > 0.05). These results indicate that rice-based DDG is a potential dietary ingredient that could be used at dietary concentrations of up to 20% for growth of juvenile sea cucumber.

• 소성∙가공
• /
• 제9권4호
• /
• pp.348-355
• /
• 2000

The backward tracing scheme(BWT) of the finite element method has been extended lot the design of sheet blank in three-dimensional deformation. Originally the scheme was developed for preform design in bulk forming, and applied to several forming processes successfully. Its key concept is to trace backward from the final desirable configuration to an intermediate preform or initial blocker. A program for initial blank design in sheet forming which contains the capabilities of forward loading simulation by the finite element method and backward tracing simulation, has been developed and proved the effectiveness by applying to a square cup stamping process. In the blank design of square cup stamping, the backward tracing program can produce an optimum blank configuration which forms a sound net-shape cup product without machining after forming. For the confirmation of the analytic result derived from the backward tracing simulations as well as forward loading simulations, a series of experiment were carried out. The experiments include the first trial sheet forming process with a rectangular blank, an improved process with a modified blank preform and the final process with an optimum blank resulted from the backward tracing scheme. The experiments show that the backward tracing scheme has been implemented successfully in blank design of sheet metal forming.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.62-68
• /
• 1993

본 연구에서는 장섬유강화 고분자복합판을 고온압축성형할 때 섬유의 분리 및 배향은 서로 불가분의 관계가 있으므로, 모재와 섬유의 분리에 의해서 야기되는 성형 품의 불균질성을 나타내는 균질도와 섬유의 배향을 표시하는 배향함수와의 상관관계에 대한 실험결과를 보고한다.

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.64-72
• /
• 1992

VLSI 전송선로의 커패시턴스를 3차원으로 계산하였다. Green's function과 표면전하밀도의 곱의 형태로 주어지는 적분식을 풀어서 커패시턴스를 구하였다. 이때, 표면전하밀도는 도체의 표면을 균일한 면적을 갖는 미소 면적소로 나누어 주었을 때 각각의 면적소 내에서는 일정한 상수값을 갖는다고 가정하였다. 지금까지의 Green's function을 이용한 적분방법에서는 적분식의 계산을 Fourier 적분의 형태로 변환하여 계산하였기 때문에 계산과정에서 어느정도의 오차가 있을 수 밖에 없었지만, 본 논문에서는 Fourier 적분을 사용하는 대신에 이중 적분을 직접적으로 적분할 수 있는 방법을 제시하였다. 이 방법을 사용하여 적용한 결과를 기존의 결과들과 비교를 함으로써, 이의 정확성을 입증하였다.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.185-191
• /
• 2007

The new FMVSS 208, 213, 225 regulations include automatic suppression of airbags to prevent low-risk airbag deployment and the use of child seats with a rigid-bar anchor system. The regulations mean that children must sit in the rear seat, but do not include other specific safety measures for their protection. In the rear, restraint equipment consists of three-point shoulder/lap belts for the outside seats and a static two-point lap belt in the middle, with no additional devices such as pretensioners or load limiters; this is far from optimal for children. This study investigated injury rates using a 3-year-old-child dummy. ECE R44 sled tests used a booster, a speed of 48 km/h, and a 26- to 32-g rectangular deceleration pulse. While seated on a booster, the dummies were restrained by an adult shoulder/lap three-point belt. HIC_15 msec, Chest G and Nij were somewhat lower with an emergency locking retractor (ELR)+pretensioner+load limiter than with only an ELR or with ELR+pretensioner. However, the current seat-belt system results in injury rates that exceed the limit for OOP performance under the new FMVSS 208 regulations.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.399-413
• /
• 2021

The solution of the time-dependent neutron diffusion equation can be approximated using quasi-static methods that factorise the neutronic flux as the product of a time dependent function times a shape function that depends both on space and time. A generalization of this technique is the updated modal method. This strategy assumes that the neutron flux can be decomposed into a sum of amplitudes multiplied by some shape functions. These functions, known as modes, come from the solution of the eigenvalue problems associated with the static neutron diffusion equation that are being updated along the transient. In previous works, the time step used to update the modes is set to a fixed value and this implies the need of using small time-steps to obtain accurate results and, consequently, a high computational cost. In this work, we propose the use of an adaptive control time-step that reduces automatically the time-step when the algorithm detects large errors and increases this value when it is not necessary to use small steps. Several strategies to compute the modes updating time step are proposed and their performance is tested for different transients in benchmark reactors with rectangular and hexagonal geometry.

• Composites Research
• /
• 제22권3호
• /
• pp.55-59
• /
• 2009

마이크로스트림 안테나는 가볍고 부피가 작을 뿐만 아니라 집적화가 가능하고, 표면 부착력이 탁월하여 많은 통신 시스템 안테나로 응용되고 있다. 안테나의 구조는 12.5GHz의 중심주파수를 갖는 사각 패치 마이크로 스트립 안테나로 설계하였고 곡률 방향으로 패치를 확장시켜 총 4개의 패치를 배열시켰다. 양쪽의 복합재료 사이에 허니컴을 삽입한 샌드위치 구조물이 되도록 설계한 다음 충격 실험을 실시하였다. 충격실험 후 안테나 성능변화를 측정한 결과 영향을 받지 않는다는 것을 확인하였다.

• 소성∙가공
• /
• 제32권4호
• /
• pp.221-227
• /
• 2023

While tube bending is a conventional forming technique, it is still used to make curved products for load-bearing members or aesthetically pleasing parts in various manufacturing industries such as automotive, aerospace, and others. Whole or local deformation of the final product such as springback, distortion, or local buckling are of interest in metal forming or precision manufacturing. In this paper, the factors affecting the cross-sectional deformation are explored. A 5-axis stretch bending machine was used for two-dimensional bending with extruded AA6082-T4 rectangular tubes. Three different bending sequences were employed: stretch before bending, stretch after bending, simultaneous bending and stretch. Furthermore, by considering both the stretch and bending angle, cross-sectional deformation was also analyzed. It was observed that employing stretch bending techniques can effectively reduce cross-sectional deformation and contribute to overall quality enhancement. Through this study, it was revealed that these factors have an impact on the cross-sectional deformation of the tubes.

• 감성과학
• /
• 제11권3호
• /
• pp.301-312
• /
• 2008

소비자 선호의 만족은 제품의 성공의 중요한 열쇠이다. 그렇기 때문에 디자인 관리자들은 소비자선호에 대해 면밀한 검토를 통해 수익성 있는 제품 디자인을 개발하려고 노력한다. 이러한 선호 디자인제품과 디자인 요소간의 영향에 관련한 연구들이 꾸준히 연구되어 왔으나 기존 연구들을 살펴보면 대다수의 연구에서는 개별제품에 대한 선호되는 디자인요소만을 다루고 있어 선호되는 디자인에 있어서 제품군별 연관성 및 차별성을 파악하지 못하고 있다는 한계점이 있었다. 따라서 본 연구는 여러 제품군들 간의 디자인요소와 소비자 선호와의 관계를 살펴 공통적인 선호 디자인요소와 개별 제품군에서만 선호되는 차별적인 선호 디자인 요소를 찾아 이를 통해 디자이너나 디자인 관리자에게 성공적인 제품 개발의 가이드라인을 제공하는데 목적이 있다. 이를 위해 본 연구에서는 휴대용 전자기기 중 전자사전, 노트북, 휴대폰, MP3플레이어를 대상으로 4개 제품에 대한 공통의 선호 디자인요소와 각각 제품별 선호 디자인요소를 분석해보았다. 이를 위한 분석 방법으로, 4개의 개별 제품군에서 공통적으로 디자인요소가 선호에 미치는 영향은 계층적 회귀분석을 사용하여 분석하였고, 개별 제품군에서 디자인 요소가 제품 선호에 미치는 영향은 회귀분석을 사용하였다. 분석결과에서, 이 4가지 제품군의 공통 선호 디자인요소 분석에서는, 전체바디타입은 영향을 미치지 않고, 전체 바디 컬러가 흰색일 경우 재질은 금속재질일 경우 광택이 경우 선호했고, 개별 제품군별 선호디자인요소의 경우, 전자사전의 경우, 바디형태가 타원형일수록, 컬러가 블랙일 경우, 노트북의 경우 개별선호 디자인요소와 공통 선호 디자인요소가 같으며, 휴대폰의 경우 재질이 플라스틱일 경우, MP3 플레이어의 경우 바디형태가 직사각형이고, 재질이 플라스틱이 선호되는 것으로 나타났다. 본 연구는 다양한 제품군에 있어서 선호에 영향을 미칠 수 있는 디자인요소를 분석함으로써 제품군별 공통의 선호 디자인요소와 개별 제품별 선호 디자인요소를 파악하여 디자이너에게 제품 개발시 좀 더 명확하고 합리적인 디자인적 시사점을 제시할 수 있다는 측면에서 의의가 있다고 할 수 있다.