• 복식문화연구
• /
• 제13권2호
• /
• pp.289-299
• /
• 2005

Through the formative analysis of the traditional jokakbo, we have composed surface composition that was made by a perfect square, triangle, a weather vane type, vertical type, cintamani type, and a mixed rectangular. And we have composed 18 kinds of motif stimulants that was made by vivid tone, pale tone, and so on, and finally analyzed sensibility image, preference rate of them. The cause of composition for the sensibility image of stimulant was composed by the cause of simplicity characteristics, interesting characteristics, rigid-flexibility characteristics, and modern characteristics. And from these things, the cause of simplicity characteristics and the cause of interesting characteristics were revealed as important dimensional factors of sensibility image. The sensibility image of motif was revealed as a simple image of perfect square, a feminine image of cintamani type, a modern image of mixed rectangular. And black-white colored mixed rectangular and chromatic colored cintamani type were also revealed as an interesting image. The preference rate of motif is related with the cause of interesting characteristics and simplicity characteristics, it also has been revealed to prefer the pale tone than others. And it also has been revealed that achromatic colored mixed rectangular, cintamani type of vivid tone, perfect square and rectangular of pale tone were mostly preferred.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.751-763
• /
• 2014

The paper is written to determine the optimal search pattern through search effects assessment on underwater targets. 5 types of search patterns are introduced such as, M-type pattern, W-type pattern, rectangular pattern, 4-type pattern and square pattern, In addition, Operational effectiveness analysis model is developed to obtain the optimum search pattern. The algorithms and mathematical models are also suggested to analyze the required search times, AUV's movement patterns, moving distances, overlapping areas and so on.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.257-262
• /
• 2017

본 논문에서는 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나에 하프 커팅과 불연속 급전 구조를 적용하여 안테나 특성을 확인하였다. 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나를 자기 대칭 라인을 중심으로 하프커팅을 하고, 급전부에 불연속 구조를 적용과 이중 슬리브 간격을 조정하여 임피던스 매칭을 하였다. 안테나 파라미터 특성을 확인하기 위하여 ANSYS사의 HFSS 시뮬레이터를 이용하였고, 안테나 크기는 $21{\times}40mm^2$이다. 제안한 안테나에서 VSWR이 2 이하인 시뮬레이션 주파수 대역은 2.6GHz~10.25GHz이다. 주파수 대역폭은 7.65GHz이다. 실제로 제작한 안테나의 주파수 대역은 3.3GHz~9.75GHz이며, 주파수 대역폭은 6.45GHz이다. 측정된 복사패턴 주파수는 3.5GHz, 5.5GHz, 7.5GHz, 9.5GHz이다. 모든 주파수에서 다이폴안테나 패턴과 유사한 복사패턴 결과를 얻을 수 있었다.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.30-44
• /
• 1992

A modification of the TEACH-like computer program based on the k-$\varepsilon$ turbulence transport was applied for predicting air mixing patterns and temperature distributions in a rectangular, slot-ventilated enclosure having obstructions ; a rectangular obstacle with heat flux, solid walls separates the passage and the pig pens, and purlins beneath the ceiling. Air flow patterns were calculated for the cases with and without the purlin, extending 300mm beneath the ceiling. Comparisons of prediction data of Randall & Battams(1976) showed air flow pattern predicted well for the case without the purlin. Heat was accumulated at the corner of the left side of the solid wall and the right-upper region of the simulated pigs. However the air distribution pattern was completely different from data for the case with the purlin. The deviation from the observation may be attributed to the difference of the geometric configuation. Exploring the cause of the deviation should be conducted in a further study. Temperature stratification was also observed due to incomplete mixing. The obstruction in the route of the inlet air jet at inlet should be avoided since most of kinetic energy dissipates at the abstacle duet to impingement.

• Structural Engineering and Mechanics
• /
• 제16권5호
• /
• pp.627-641
• /
• 2003

The structural intensity fields of rectangular plates with single cutout and multiple cutouts are studied. The main objective is to examine the effect of the presence of cutouts on the flow pattern of vibrational energy from the source to the sink on a rectangular plate. The computation of the structural intensity is carried out using the finite element method. The magnitude of energy flow is significantly larger at the edges on the plate near the cutout boundary parallel to the energy flow. The effects of cutouts with different shape and size at different positions on structural intensity of a rectangular plate are presented and discussed. A case study on a plate with two cutouts is also presented.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.173-181
• /
• 2000

The stability of a structural plate is a crucial problem which causes wrinkling and buckling. In this paper, the effect of the pattern of spot-welding points in the two rectangular plate on the shear buckling load is studied with respect to the thickness, the aspect ratio of plates, the number of welding spots. Buckling coefficient of the simple plate was compared with that of two plates with various conditions to extract the effect of buckling strength. The effect of the number of welding spots are studied in two directions, longitudinal and transverse directions. The concluded that the reinforcement effect was maximized when the aspect ratio was close to 1.5 and that the effect of number of welding spots in longitudinal direction was larger than that in transverse direction.

• 설비공학논문집
• /
• 제3권5호
• /
• pp.350-364
• /
• 1991

The movements of small particles distributed uniformly in a steady flow in rectangular chambers having inlets and outlets were simulated numerically. Low Reynolds number turbulent model with a two-equation ($k-{\varepsilon}$) which describes the turbulent characteristics was applied to predict the air flow pattern and particles movements under the condition of the various locations and size of ducts. The calculation results show that the prediction of recirculation zone and stagnation point of flow is important to determine the particles behavior according to the design change. These results will be useful in designing the rectangular chambers for collective protection.

• 설비공학논문집
• /
• 제3권5호
• /
• pp.365-375
• /
• 1991

Confined natural convection due to lateral temperature difference in rectangular enclosures was studied numerically and experimentally for the insulated and the constant temperature enclosures. In the case of insulated enclosure, the flow pattern and heat transfer modes are rather simple depending mainly upon Rayleigh number. In the case of isothermal enclosure, however, the phenomena of flow and heat transfer are somewhat complex and interesting due to the stable thermal gradients and various circumstances resulted from four wall temperature conditions. As a dimensionless variable, to describe properly the flow and heat transfer phenomena in the isothermal enclosure, temperature difference ratio ${\Delta}T_v/{\Delta}T_H$ is newly introduced and this parameter seems to be appropriate in the analysis of results on the effect of stabilizing thermal gradient.

• Journal of Computational Design and Engineering
• /
• 제1권4호
• /
• pp.289-297
• /
• 2014

Although big-sized markers are good for accurate marker recognition and tracking, they are easily occluded by other objects and deteriorate natural visualization and level of immersion during user interaction in AR environments. In this paper, we propose an approach to exploiting the use of rectangular markers to support tangible AR interaction based on fingertip touch using small-sized markers. It basically adjusts the length, width, and interior area of rectangular markers to make them more suitably fit to longish objects like fingers. It also utilizes convex polygons to resolve the partial occlusion of a marker and properly enlarges the pattern area of a marker while adjusting its size without deteriorating the quality of marker detection. We obtained encouraging results from users that the approach can provide better natural visualization and higher level of immersion, and be accurate and tangible enough to support a pseudo feeling of touching virtual products with human hands or fingertips during design evaluation of digital handheld products.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.457-464
• /
• 2001

The aeroacoustic phenomena in the simple rectangular open cavity are well published by many researchers. But the geometry shapes of aircraft landing gear wells, weapon bays, etc. are more complicate than that of the simple retangular cavity. They are more similar to the cavity having cover-plates at adges, or Helmholtz resonator. Therefore, the effects of cover-plates existing on edges of rectangular open cavity are numerically investigated in this paper. The compressible Navier-Stokes equations are solved for two-dimensional cavities with laminar boundary layers upstream. The high-order and high-resolution numerical schemes are used for the evaluation of spatial derivatives and the time integration. Physically correct numerical boundary conditions and buffer zone techniques are implemented to produce time-accurate solutions in the whole computation domain. The computational domain is large enough to directly resolve a portion of the radiated acoustic field. Results show that the cover-plates existing on edges of cavity reduce the noise convected from cavity, make the frequency of noise become higher, and change the directivity pattern. So these results can be used in the design of a low noise cavity.