• 설비공학논문집
• /
• 제4권2호
• /
• pp.106-115
• /
• 1992

Numerical analysis of the laminar natural convection in an enclosure of the 20KVA oil-immeresed transformer is presented. The core in the transformer is modelled as a rectangular cylinder and calculation is carried out for $Ra=10^3-10^6$. The correlating equation between the inner cylinder mean Nusselt numbers and Rayleigh numbers can be obtained. The conduction and convection regimes for the variation of Rayleigh numbers are well represented in the temperature distributions along the side wall of the inner cylinder. For high Rayleigh numbers, it is found that the recirculating flow in the enclosure above the inner cylinder is divided into two recirculation regions.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.125-129
• /
• 1988

The acattering characteristics by the TE incident wave are analysed for its dielectric cylinder with arbitrary cross section partially covered by thin conductors. The integro differential equations consistent with boundary conditions of conductors and dielectric boundaries are derived by the equivalence principle. They are transformed into matrix equations by moment method. The rectangular dielectric ctlinder partially coverd by conductors at the upper and bottom side of the cylinder is chosen for the numerical example. Current distributions on conductors and sacttring cross sections by the cylinder are computed for the TE incident perpendicular to the conductor plane.

• 한국강구조학회 논문집
• /
• 제20권6호
• /
• pp.751-759
• /
• 2008

본 연구에서는 구조적 기본단면인 사각단면중에서 B/D=2,3,4,5 단면을 대상으로 단면주위 흐름상태가 단면의 공기력 특성에 미치는 영향을 살펴보고, 정지/진동하는 B/D=4 사각실린더 주위의 비정상압력장에 POD해석을 도입함으로써 흐름패턴에 따른 POD해석의 고유벡터를 규정하고 실린더 주위 흐름장 안에 공존하는 서로 다른 흐름패턴의 상호간섭과 물리적 모드분해에 관하여 검토하였다. POD해석의 고유벡터 비교를 통해서 칼만와류는 박리버블에 의해서 거의 영향받지 않지만 칼만와류는 단면후류부에서 박리버블의 발달에 상당히 간섭하고 있음을 확인하 였다. 변장비(B/D=2,34,5) 변화에 따른 ${dC_L/d\alpha}$, ${H_1^{*}}$의 정(+)부(-)의 차이, 즉 갤로핑현상에 대한 안정/불안정성은 박리전단층의 재부착에 깊은 관련이 있는 것으로 판단되며 B/D=3,4에서 시간평균적으로 재부착하던 주위흐름장이 칼만와류의 방출을 제어하면 재부착하지 않는 것으로 생각된다. 즉, 칼만와류의 억제는 후류부에서 박리전단층의 곡률이 작아지도록 간섭하고 단면에 있어서 elongation효과를 나타낸다.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.62-67
• /
• 2013

In this paper, the wave run.up on a vertical cylinder is presented. Various cross sections of a cylinder were simulated using the panel method for various wave periods. Two.dimensional model tests were performed in a wave flume. The simulation results are compared with the test results. The simulation is based on the linear diffraction theory.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1254-1263
• /
• 1990

본 연구에서는 기관 실린더 사이의 거리와 기관 블럭의 외벽에 부착된 윈이 실린더내벽면 온도분포에 미치는 영향을 알아보기 위하여 2차원 정상.비정상 열전도 해석을 하였다. 물론 2차원 열전도 해석 결과는 전 실린더 블럭에 적용할 수 있는 것은 아니며 블럭의 상단과 하단 부근에서는 적용시키기 어렵고 중간 부근에서만 적용 할수 있는 것이지만, 2차원 해석을 통해서 격자의 수를 대단히 많이 늘일 수 있어서 그해의 정확도를 높힐 수 있기 때문에 실린더 사이의 간격과 휜의 크기 등이 실린더 내벽면 온도에 미치는 영향, 정상.비정상 해석의 차이점 등을 명확히 규명할 수 있는 잇점이 있어서 본 연구에서 채택하였다.따라서 본 해석 결과는 전 실린더에 대해서 국부적으로 적용될 수 있는 것이 아니라 전 실린더에서의 값에 대한 평균 값으로 이해 되어야 할 것이다.

• Wind and Structures
• /
• 제34권1호
• /
• pp.101-113
• /
• 2022

We experimentally investigate the high-Reynolds flow around a rectangular cylinder of aspect ratio 5:1. This configuration is the object of the international BARC benchmark. Wind tunnel tests have been carried out for the flow at zero angle of attack and a Reynolds number, based on the crossflow cylinder length and on the freestream velocity, equal, to 40 000. Velocity measurements are obtained by using hot-wire anemometry along 50 different cross-flow traverses on the cylinder side and in the near wake. Differential pressure measurements are acquired on multiple streamwise sections of the model. The obtained measurements are in a good agreement with the state-of-the-art experiments. For the first time among the several contributions to the BARC benchmark, detailed flow measurements are acquired in the region near the cylinder side and in the near-wake flow. The edges and the thickness of the shear layers detaching from the upstream edges are derived from velocity measurements. Furthermore, we compute the flow frequencies characterizing the roll-up of the shear layers, the evolution of vortical structures near the cylinder side and the vortex shedding in the wake.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.126-126
• /
• 2007

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.98-99
• /
• 2003

• Journal of Ship and Ocean Technology
• /
• 제5권2호
• /
• pp.50-61
• /
• 2001

In this paper, nonlinear interactions between water waves and a horizontally submerged circular cylinder are numerically simulated. In this case, the nonlinear interactions between them generated a wave breaking phenomenon. The wave breaking phenomenon plays an important role in the wave farce. Negative drifting forces are raised at shallow submerged cylinders under waves because of the wave breaking phenomenon. For the numerical simulation, a finite difference method based on the unsteady incompressible Navier-Stokes equations and the continuity equation is adopted in the rectangular grid system. The free surface is simulated with a computational simulation method of two-layer flow by using marker density. The results are compared with some existing computational and experimental results.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.350-355
• /
• 2001

Minimum clearance between the piston seal groove of a piston and cylinder bore to ensure against extrusion of the piston seal and leakage of working fluids is an important design parameter for a seal designer in hydraulic cylinder application. Contact force, critical pressure at which extrusion occurs, leakage rate, fluid film thickness and friction force have been analyzed for some design parameter such as clearance between cylinder wall piston, depth of rectangular groove and pressure of sealed hydraulic fluid. In this paper, we analyze displacement and stress of ACGT seal by finite element analysis to understand Contact Behaviour Characters