• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.294-299
• /
• 2011

$SnO_2$ nanoparticles were synthesized by a hydrothermal method and gas sensors were fabricated using nanoparticles to detect dimethyl methylphosphonate(DMMP) gas. The prepared $SnO_2$ nanoparticles exhibited a high response(72 at $500^{\circ}C$) to 5 ppm DMMP gas compared to commercial $SnO_2$ nanopowders, but their recovery was relatively poor. Various metals(Ni, Sb, Nb) were added to the $SnO_2$ nanoparticles to improve their recovery properties. The focus of this study was to investigate the effects of metal oxide additives on DMMP sensing behavior in $SnO_2$ nanoparticles.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.186-198
• /
• 2022

Heavy metals recovery from Printed Circuit Boards industrial wastewater is crucial because of its cost effectiveness and environmental friendliness. In this study, a copper recovery route combining the sequential processes of acid leaching and LIX 984N extracting with an electrowinning technique from Printed Circuit Boards production's sludge was performed. The used residual sludge was originated from Hanoi Urban Environment One Member Limited Company (URENCO). The extracted solution from the printed circuit boards waste sludge containing a high copper concentration of 19.2 g/L and a small amount of iron (0.575 ppm) was used as electrolyte for the subsequent electrolysis process. By using a simulation model for multi-step current electrolysis, the reasonable current densities for an electrolysis time interval of 30 minutes were determined, to optimize the specific consumption energy for the copper recovery. The mathematical simulation model was built to calculate the important parameters of this process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.5-17
• /
• 2021

This study is a literature review on the recovering phosphorus from Incinerated Sewage Sludge Ash(ISSA), which has relatively high content of phosphorus. Experimental conditions and influencing factors related to the recovery of P and removal of heavy metals by wet and thermochemical methods were discussed. For the practical application of the recovery of P from ISSA, an integrated process linked to incineration facilities is required in terms of economy from the perspective of the entire system including disposal of wastewater and residues generated during the recovery process, and minimizing added chemicals and energy consumption.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.28-36
• /
• 2008

The effect of attrition scrubbing on the recovery of platinum group metals (PGMs) from automobile catalytic converters has been investigated. Catalytic converters were first crushed into particles less than 2 mm and attrition scrubbed in the range of 60 min, and then they were sieved with several screens. The catalyst layer, $\gamma$-alumina, was dislodged from the surface of the supporting matrix into fine particles less than $45{\mu}m$ by attrition scrubbing. The fraction of fine particles less than $45{\mu}m$ increased as the residence time for attrition scrubbing increased. The composition of the fine fraction obtained at a residence time of 40 min was $CeO_2$ 19.3%, $ZrO_2$ 1.9% and PGMs 419 ppm. In the fine fraction, the recovery of y-alumina increased proportionally to the residence time. Simultaneously, the recovery rates of $CeO_2$, $ZrO_2$ and PGMs increased to 82.9%, 78.7% and 78.9%, respectively. The production of the fine fraction less than $45{\mu}m$ and the recovery of $\gamma$-alumina increased when the solid concentration and initial feed size increased. Therefore, the attrition scrubbing as the comminution and separation process was concerned to be effective for the recovery of catalyst layer from ceramic supporting matrix by physical impact and shearing action between particles in the scrubbing vessel.

• Journal of Environmental Science International
• /
• v.10 no.4
• /
• pp.299-304
• /
• 2001

For the remediation of the contaminated soil with heavy metals, Cd, Cr, Cu, and Pb, the reaction parameters were optimized. Tartaric acid (TA) and oxalic acid(OA) as a washing agent and recovery of metals, The optimum washing conditions of TA and OA were in the ratio of 1 : 20 between soil and acid solution during 2hr reaction under unbuffered pH solutions. At the optimized reaction conditions, the removal efficiencies were compared with that of 0.1 M HCl and ethylenediamine tetraacetic acid(EDTA). TA showed higher efficiency on the removal of Pb than that of EDTA, which established for the remediation of contaminated soil with Pb and Cd metals. The recovery of metal ions from washing solution was achieved by adding calcium hydroxide and sodium sulfide by forming the precipitation of metal hydroxide and metal slfied. Optimum amounts of sodium sulgide and calcium hydroxide were Cd = 25g/$\ell$, Cu = 5~10g/$\ell$ and Pb = 5~10g/$\ell$ for the washing solution of OA and 2~5g/$\ell$ for the washing solution of TA, respectively. The amounts of $Na_2S$ and $CA(OH)_2$ for the tartaric acid was less than that of oxalic acid.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.469-477
• /
• 1994

Many researchers have investigated most representative sequential extraction method using various reagents for determining the chemical forms of metals in soils and sediments. In this paper, a newly modified method for sequential extraction scheme based on Tessier's method by Environmental Geochemistry Research, Centre for Environmental Technology, Imperial College, was introduced and examined. In comparison with Tessier's method, originally designed for sediment analysis by Atomic Absorption Spectrophotometry (AAS), the sequential extraction scheme has been developed for the multi-element analysis by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). The partitioning of particulate trace elements was classified into five fractions: (i) exchangeable, (ii) bound to carbonates or specially adsorbed, (iii) bound to Fe and Mn oxides, (iv) bound to organic matter and sulphides and (v) residuals. The experimental results of the pilot study for in-house reference material (HRM2) and certified international standard reference material (SRM2711) using the modified method showed not only reasonable precision and accuracy but also acceptable overall recovery rates. In addition, mine dump soils sampled in the Dalsung Cu-W mine, Korea were prepared and sequentially extracted using the method. Most of Cu was bound to organic matter/sulphides and residual fractions. The dominant fraction of soil Pb and Zn in the study area was found in the residuals. The fraction of Cd showed a wide variation between samples and could be found bound to the carbonates or specially adsorbed, oxides, organic fraction and residuals. The recovery rates of Cd, however, were poor due to relatively low Cd concentrations in soils. The heavy metals in these mine dumps appear to be in the more inert forms and should not be readily bioavailable. The soils, however, had very low pH values (average 4.1) and had sandy textures; consequently, rapid infiltration of rainfall may increase leaching of Zn and Cd which were found to be around 5 to 10% of the exchangeable fraction. As a result of the investigation of this study, it has been strongly recommended that these mine waste materials should still be considered a significant contaminant source and will need environmental remediation to prevent pollutants from being released into the environment.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.51-58
• /
• 2019

Dismantlement of lithium primary batteries without explosion is required to recycle the lithium primary batteries which could be exploded by heating too much or crushing. In the present study, the optimum discharging condition was investigated to dismantle the batteries without explosion. When the batteries were discharged with $0.5kmol{\cdot}m^{-3}$ sulfuric acid, the reactivity of the batteries decreased after 4 days at $35^{\circ}C$ and after 1 day at $50^{\circ}C$, respectively. This result shows that higher temperature removed the high reactivity of the batteries. Because loss of metals recycled increases when the batteries are discharged only with the sulfuric acid, discharging process using acid solution and water was newly proposed. When the batteries were discharged with water during 24 hours after discharging with $0.5kmol{\cdot}m^{-3}$ sulfuric acid during 6 hours, the batteries discharged were dismantled without explosion. Because decrease in loss of metals was accomplished by new process, the recycling process of the batteries could become economic by the 2-step discharging process.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.46-54
• /
• 2008

It is well known that PCB (Printed Circuit Board) is a complex mixture of various metals. In this study, pyro-metallurgical process was investigated to extract valuable metallic components from the PCB scrap. PCB scrap was shredded and oxidized to remove plastic materials, and then, quantitative analysis were made. 15 mass %$Al_2O_3-45$ mass %CaO-40 mass %$SiO_2$ and 32 mass %$SiO_2-20$ mass %$Al_2O_3-38$ mass %CaO-10 mass %MgO, were chosen as basic slag compositions which are determined based on the quantitative analysis of PCB scrap. During experiments a super kanthal rotating furnace was used to melt and separate metallic components. Moreover the revolution effect on was the recovery of valuable metals from PCB scrap also investigated.

• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.61-67
• /
• 1997

Heavy metal adsorption by microbial cells is an alternative to conventional methods of heavy metal removal and recovery from metal-bearing wastewater The waste Sac-chuomyces cerevisiae is an inexpensive, relatively available source of biomass for heavy metal biosorption. Biosorption was investigated by free and immobilized-S. cerevisiae. The order of biosorption capacity was Pb>Cu>Cd with batch system. The biosorption parameters had been determined for Pb with free , cells according to the Freundlich and Langmuir model. It was found that the data fitted reasonably well to the Freundlich model. The selective uptake of immobilized-S. cerevisiae was observed when all the metal ions were dissolved in a mixed metals solution(Pb, Cu, Cr and Cd). The biosorption of mixed metals solution by immobilized-cell was studied in packed bed reactor. The Pb uptake was Investigated in particular, as it represents one of the most widely distributed heavy metals in water. We also tested the desorption of Pb from immobilized-cell by us- ing HCI, $H_2SO_4$ and EDTA.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.72-81
• /
• 2009

The demand for platinum group metals for various advanced industries has been growing due to their excellent physical and chemical properties. Since the deposit of platinum minerals are restricted to few countries, their recovery from various secondary resources has becomes an important issue to related industries for keeping the supply reliably. In this paper, patents on the metallurgical technologies for the platinum group metals were analyzed. The search of patent was limited to the open patents of USA (US), European Union (EP), Japan (IP), and Korea (KR) from 1986 to 2006. Patents were surveyed using key-words searching and selected by filtering criteria. The trend of patents was analyzed by the years, countries, companies, and technologies.