• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.5
• /
• pp.224-228
• /
• 2014

Recently, the demands for separation/recovery of valuable metals such as nickel or tin from copper based alloys has been attracting much attention from the viewpoints of environmental protection and resource utilization. In this report, experimental results on concentration increasement of nickel and tin compared to the previous report are investigated. Ni is successfully separated by a organic solvent and reduced to the metal powder whose concentration is over 98 %. Sn is separated by a selective solution method and its concentration is increased to 97.5 % by three consecutive solution and reduction process. Crystal structure, surface morphology and microstructure of the separated samples are studied.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.801-806
• /
• 2001

A study has been carried out on the separation of gold, iridium, palladium, rhodium, ruthenium and platinum in chromite samples and their quantitative determination using inductively coupled plasma atomic emission spectrometry (ICP-AES). The dissolution condition of the minerals by fusion with sodium peroxide was optimized and chromatographic elution behaviour of the rare metals was investigated by anion exchange chromatography. Spectral interference of chromium, a matrix of the minerals, was investigated on determination of gold. Chromium interfered on determination of gold at the concentration of 500 mg/L and higher. Gold plus trace amounts of iridium, palladium, rhodium and ruthenium, which must be preconcentrated before ICP-AES was separated by anion exchange chromatography after reducing Cr(Ⅵ) to Cr(III) by H2O2. AuCl4- retained on the resin column was selectively eluted with acetone- HNO3-H2O as an eluent. In addition, iridium, palladium, rhodium and ruthenium remaining on the resin column were eluted as a group with concentrated HCl. However, platinum was eluted with concentrated HNO3. The recovery yield of gold with acetone-HNO3-H2O was 100.7 ${\pm}2.0%$, and the yields of palladium and platinum with concentrated HCl and HNO3 were 96.1 ${\pm}1.8%$ and 96.6 ${\pm}1.3%$, respectively. The contents of gold and platinum in a Mongolian chromite sample were 32.6 ${\pm}$ 2.2 ${\mu}g$/g and 1.6 $\pm$ 0.14 ${\mu}g$/g, respectively. Palladium was not detected.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.8
• /
• pp.1242-1248
• /
• 2007

Genomic analysis of a hyperthermophilic archaeon, Thermococcus onnurineus NA1 [1], revealed the presence of an open reading frame consisting of 1,377 bp similar to ${\alpha}$-amylases from Thermococcales, encoding a 458-residue polypeptide containing a putative 25-residue signal peptide. The mature form of the ${\alpha}$-amylase was cloned and the recombinant enzyme was characterized. The optimum activity of the enzyme occurred at $80^{\circ}C$ and pH 5.5. The enzyme showed a liquefying activity, hydrolyzing maltooligosaccharides, amylopectin, and starch to produce mainly maltose (G2) to maltoheptaose (G7), but not pullulan and cyclodextrin. Surprisingly, the enzyme was not highly thermostable, with half-life ($t_{1/2}$) values of 10 min at $90^{\circ}C$, despite the high similarity to ${\alpha}$-amylases from Pyrococcus. Factors affecting the thermostability were considered to enhance the thermo stability. The presence of $Ca^{2+}$ seemed to be critical, significantly changing $t_{1/2}$ at $90^{\circ}C$ to 153 min by the addition of 0.5 mM $Ca^{2+}$. On the other hand, the thermostability was not enhanced by the addition of $Zn^{2+}$ or other divalent metals, irrespective of the concentration. The mutagenetic study showed that the recovery of zinc-binding residues (His175 and Cys189) enhanced the thermo stability, indicating that the residues involved in metal binding is very critical for the thermostability.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.326-330
• /
• 2015

Polymeric membranes have been used in various applications and generally applied to the systems prevented from exterior exposure. However, polymer membranes for outdoor usages such as, an air quality monitoring and membrane reservoirs for the selective recovery of useful metals from seawater, have been newly developed. Thus it is required to investigate the properties of the membrane for the outdoor use and also studies of the accelerated UV exposure onto the polymeric membranes are essential to estimate their weatherability. Herein, we report on the thermal and mechanical properties, morphology changes, and color differences of the polysulfone anisotropic membranes and non-woven type polypropylene membranes with the accelerated UV exposure. Results showed that the effect of UV exposure on the membrane depend not only on the polymer used but also on the form of the membrane. This work can provide some of key informations of the membrane for outdoor use.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.17-21
• /
• 2005

Deep-sea Manganese nodules was treated with reduction-smelting process with adding the spent Ni-Cd battery or the cobalt contained spent catalyst for recovery of nickel and cobalt metals. The nickel in the spent Ni-Cd battery could be recovered by adding $5\%$ coke as a reducing agent regardless of the amount of battery added. However, to recover cobalt from the spent catalyst, it is require to add more coke for reduction of cobalt oxide in the catalyst. The treatment of metal wastes with manganese nodules can contribute to lower the cost for the processing of nodules and to facilitate the recycling of metal wastes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.114-118
• /
• 2013

Separation/recovery of valuable metals such as nickel or tin from copper based alloys has recently attracted from the viewpoints of environmental protection and resource recycling. In this report, preliminary study on concentration and separation of nickel from copper based alloy dross using selective adsorption by chelate resin was performed. The chelate resin used in this study has absorbed copper ions more easily than nickel ions in the metal solution, which could allow the concentration/separation of the nickel from the copper base alloy solution. The final molar ratios of Ni and Cu ions in the two concentrated solutions were 70 and 99 % respectively after three-time flowing the solution through the chelate resin column.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.27-35
• /
• 1998

EAF dust generated from electric arc steelmaking process is classified as "hazardous" materials by tbe environmental regulation because of the existence of water leachable heavy metals such as Fe, Zn, Pb, and Cd. However, Fe and Zn among t the elements in the dust can be recovered to high valuable materials by applying a proper process. Therefore, in order to study t the possibility of recovery of iron from EAF dust, the effect oE carbon content and basicity, of synthesized EAF dust on the reduction rate of iron oxide was studied. Experimental results are as follows: TIle softening and melting temperature of the slag w was illcreased with increasing carbon addition amount [or carbon reduction eqUIvalent. At the carbon addition amount of 100% for carbon reduction equivalent and basicity of 1.7, reduction rate of $Fe_2O$ in the slag was the highest. The reaction order fur reduction of $Fe_2O$ by carbon was nearly first order.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.71-77
• /
• 2013

Electronic products such as appliances, computers, and cellular phones have printed circuit boards (PCBs) in common and the PCBs in the waste electronic products contain valuable metals and organic resins. In Korea, recovery and recycling of the organic resins as well as the valuable metallics from the wastes are required indeed as the most of resources are being imported from abroad. In this article, the patents and papers for the recycling of organic residues from the waste PCBs were collected and analyzed. The open patents of USA (US), European Union (EP), Japan (JP), and Korea (KR) and SCI journals from 1979 to 2012 were investigated. The patents and journals were collected using key-words and filtered by the definition of the technology. The patents and journals were analyzed by the years, countries, companies, and technologies and the technical trends were discussed in this paper. It is showed sluggish relatively activity of published papers and patent applications for polymer manufacturing technology in local and abroad.

• Journal of Wetlands Research
• /
• v.12 no.3
• /
• pp.15-20
• /
• 2010

The contamination loadings generated in Changwon City are coming into Masan Bay through the Bongam tidal flat except the loadings collected and transferred by sewer lines to the wastewater treatment plant. The recovery of waterbirds, shellfishes, and fishes has been quite well recognized in recent years after the first implementation of Masan Bay TPLM (Total Pollution Loads Management) in Korea. This tidal flat has been conserved by the cooperation of several stakeholders and utilized as an ecosystem field site for in situ education. A large industrial complex has been operated since 1970's, therefore increasing the level of pollutants in estuary and costal sediments, especially by heavy metals. Zinc, copper, and lesd contamination of sediment was revealed at higher level by Clean-up guideline (MOMAF) or heavily polluted level by SQC (USEPA). There was a significant difference between two sites at the 95% confidence level, which implies no homogeneity in the processes of transport and deposition even at 500 m of distance. The heavy metal concentrations in the Bongam sediments have been gradually decreased with comparing the data of 2006, and 2009.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.196-202
• /
• 1999

Brown algae, Sargassum horneri, was used as an adsorbent to remove heavy metal Cd(II) and Pb(II) ions. Sargassum horneri picked in East Coast was formulated into the grain with the size of 40-60 mesh after wind dry. Batch method was used in order to investigate the adsorption rate by measuring the adsorption amounts with shaking time. In the column method, the adsorption amounts were measured by flowing metal solutions into the algae-packed column at the rate of 1 ml/min. Adsorption amounts in both batch method and column method were in the following order : pH 10.5>7.0>3.5. It was found that Pb(II) was more adsorbed on the algae grain than Cd(II). It was also revealed that the adsorption amounts reached the maximum within 5 minutes irrespective of pH condition in the batch method. It was concluded that the batch method was more effective than the column method in terms of recovery rate.