• Clean Technology
• /
• v.24 no.2
• /
• pp.87-98
• /
• 2018

Phosphorus (P) is an essential and irreplaceable element for all living organisms, and it is widely used as a fertilizer. Unfortunately, it is estimated that phosphate reservoir is depleted within about 100 years. Sewage sludge ash (SSA) is an alternative resource for P recovery because of its high P content. However, SSA cannot be directly used as a fertilizer due to heavy metals in it and low P bioavailability. Thermochemical treatment with Cl donor is known to reduce heavy metal contents and increase P bioavailability of SSA. Literature review on thermochemical technologies of SSA for the reduction of heavy metals and bioavailability enhancement has been carried out to estimate the status of current P recovery technology and to develop strategic future research plan for P recovery. The review showed that $CaCl_2$ and $MgCl_2$ were the most effective Cl donors and reaction temperature (< $1000^{\circ}C$) was the critical operation condition for the reduction. The removal efficiency depends on the species of heavy metals. Thermochemical technology of SSA for P recovery showed the possibility of commercial application in the near future to overcome the coming crisis of human sustainability by P depletion, but it needs cost effectiveness and more ecofriendly process to reduce energy consumption.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.161-171
• /
• 2017

Demand for high-grade limestone is increasing, but the production in the domestic mines has been limited due to the lack of systematic development plans and efforts to develop mining technology to improve the recovery ratio, transition to high-cost underground mining due to increasing social awareness of environmental protection, and the smallness of the domestic mining industry, etc. In this study in connection with this issue, an analysis on the recovery change by improvement of mining method was executed. 3D modeling technique was used to construct a 3D model. 3D model includes the geological structure, the limestone ore body and the underground pits and tunnels excavated at the Daepyeong District of Daesung MDI Donghae District. By using the 3D model, measured resources, reserves and ore recovery were evaluated from the results of pilot operation of the room and pillar hybrid mining method, which is a variant of room and pillar mining method. These results were compared with those obtained from the conventional mining method. The ore recovery obtained by hybrid mining method was found to be up to 71.6%, showing about 26%p. increase compared with the case of conventional mining method.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2005

In this paper, an impulse generator for UWB(Ultra Wide-band) technique with great possibility to be adopted as a next generation indoor WLAN(Wireless Local Area Network) has been designed by using SRD(Step Recovery Diode). Design goal is to design an impulse generator with simple structure, low cost, small size, and high performance. The impulse generator satisfied by FCC's regulation ( frequency range: 3.1~10.6 GHz, limit of power level: -41.25 dBm ) has been simulated by using ADS(Advanced Design System) which is the trade name of the Agilent Technologies. The output power of the impulse generator has been explained separately for single and multi band purposes, respectively.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.179-182
• /
• 2001

This paper has been studied a wavelet based still image transmission over the wireless channel. EZW(Embedded Zerotree Wavelet) is an efficient and scalable wavelet based image coding technique, which provides progressive transfer of signal resulted in multi-resolution representation. It reduces therefore the reduce cost of storage media. Although EZW has many advantages, it is very sensitive on error. Because coding are performed in subband by subband, and it uses arithmetic coding which is a kind of variable length coding. Therefore only 1∼2bit error may degrade quality of the entire image. So study of error localization and recovery are required. This paper investigates the use of reversible variable length codes(RVLC) and data partitioning. RVLC are known to have a superior error recovery property due to their two-way decoding capability and data partitioning is essential to applying RVLC. In this work, we show that appropriate data partitioning length for each SNR(Signal-to-Noise Power Ratio) and error localization in wireless channel.

• Journal of Korean Academy of Nursing
• /
• v.44 no.4
• /
• pp.381-390
• /
• 2014

Purpose: The purpose of this study was to identify the effects of a Progressive Walking program (PW) on physical activity, exercise tolerance, recovery, and post-operative complications for patients with a lung resection. Methods: A nonequivalent control group non-synchronized design was utilized and 37 participants with a lung resection (22 for control group, 15 for experimental group) were recruited at A university hospital from December 2012 to August 2013. The PW consisted of preoperative education, goal setting, and feedback, provided to the experimental group, and usual care to the control group. Data were analyzed using the SPSS WIN 18.0. Results: A higher proportion of patients in the experimental group showed adequate levels of physical activity (p=.001), shorter period of chest tube retention (${\leq}7$ days; p=.011), and shorter stay in the hospital (${\leq}10$ days; p=.036) than patients in the control group. Patients in the experimental group reported longer 6-minute walking distance (p=.032) and lower levels of dyspnea (p=.049) than patients in the control group. The PW did not influence the occurrence of pulmonary complications. Conclusion: The findings of this study suggest that the PW could be a useful strategy for improving patients' post-operative health and reducing cost after lung resection.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.3
• /
• pp.273-278
• /
• 2007

Modern society has moved from a phosphorus recycling loop, where animal manure and human wastes were spread on farming land to recycle nutrients, to a once-through system, where phosphates are extracted from mined, non-renewable phosphate rock and end up either in landfill(sewage sludge, incinerator ash) or in surface waters. In this research, crystallization of nitrogen and phosphate with natural sources of $Mg^{2+}$ in synthetic water was tested. The operational parameters of pH, mixing time, and the magnesium molar ratio were investigated to find optimal conditions of the MAP precipitation using synthetic wastewater. The removal efficiency of phosphate increased with pH up to 11. By MAP precipitaiton of the synthetic waste water, 94% of the phosphate were eliminated at pH 11. It was found that at least 10 minutes mixing time was required and 20 minutes mixing time was recommended for efficient phosphate removal. High efficiency removal of phosphate was possible when the magnesium molar ratio was 1.0~2.0. The comparative study of different magnesium sources showed that coagulants (PAC) was the more efficient sources than only magnesium. The result showed that 97% of phosphate removal. In conclusion, coagulants (PAC) induced crystallization of struvite and hydroxyapatite was shown to be a technically viable process that could prove cost effective for removing phosphate in wastewater.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2969-2979
• /
• 2000

A mobile host has failure causes such as failure of the mobile host, disconnection of the mobile host, and wireless link failure that have not been seen in traditional computing environments. So far there have been few studies on fault tolerance of a mobile host in mobile computing environments. The Lazy scheme, a failure recovery technique of the mobile host, is a cost-effective one. However, this scheme has a defect that the mobile host cannot be recovered from failure of the base station with acheckpoint of the mobile host. In this paper, we propose and evaluate the Redundant Lazy scheme for performance improvement of the Lazy scheme.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.651-659
• /
• 2003

A new method was proposed to control Harmful Algal Blooms (HABs) by a biosurfactant sophorolipid. The effect of sophorolipid on the growth, motility, precipitation, and recovery of algal cells was investigated for four common HAB species, Scripsiella trochoidea, Prorocentrum minimum, Cochlodinium polykrikoides, and Heterosigma akashiwo. The motility and growth of algal cells were inhibited significantly at the concentration of 20 and 5 mg/l sophorolipid, respectively, and no recovery was observed under the above concentrations. The concentration of 20 mg/l sophorolipid was considered to be an effective concentration for the mitigation of HABs. A sedimentation test suggested that the maximum precipitation occurred at the end of 1 h, and the algicidal effect of sophorolipid was observed by a microscope. Comparative study showed that sophorolipid had marked algicidal capability. Analysis on biodegradability, toxicity, and cost effectiveness further demonstrated the potential of sophorolipid in future HABs mitigation.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.464-471
• /
• 2009

This paper introduces a new Motion-$SPM^{TM}$ (Smart Power Modules) module in Single In-line Package (SIP), which is a fully optimized intelligent integrated IGBT inverter module for up to 1kW low power motor drive applications. This module offers a sophisticated, integrated solution and tremendous design flexibility. It also takes advantage of pliability for the arrangement of heat-sink due to two types of lead forms. It comes to be realized by employing non-punch-through (NPT) IGBT with a fast recovery diode and highly integrated building block, which features built-in HVICs and a gate driver that offers more simplicity and compactness leading to reduced costs and high reliability of the entire system. This module also provides technical advantages such as the optimized cost effective thermal performances through IMS (Insulated Metal Substrate), the high latch immunity. This paper provides an overall description of the Motion-$SPM^{TM}$ in SIP as well as actual application issues such as electrical characteristics, thermal performance, circuit configurations and power ratings.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.216-224
• /
• 1999

In the paper we propose two recovery methods by adopting a rollback and/or roll-forward technique (S) to recover TMR failures in a TMR (structured ) system that is the simplest spatial redundancy. This technique is apparently effective to recovering TMR failures primarily caused by transient faults. The proposed policies carry out few reconfigurations at the cost of (minimal) time-overhead needed for those time-redundant schemes. The optimal checkpoint-interval vectors are derived for both methods through the likelihoods of all (possible) states of the system as well as the total execution-time. Consequently the effectiveness of our proposed policies is validated through certain numerical examples and simulations.