• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.697-702
• /
• 2019

In this study, using a wet chemical process, we evaluate the effectiveness of different solution concentrations in removing layers from a solar cell, which is necessary for recovery of high-purity silicon. A 4-step wet etching process is applied to a 6-inch back surface field(BSF) solar cell. The metal electrode is removed in the first and second steps of the process, and the anti-reflection coating(ARC) is removed in the third step. In the fourth step, high purity silicon is recovered by simultaneously removing the emitter and the BSF layer from the solar cell. It is confirmed by inductively coupled plasma mass spectroscopy(ICP-MS) and secondary ion mass spectroscopy(SIMS) analyses that the effectiveness of layer removal increases with increasing chemical concentrations. The purity of silicon recovered through the process, using the optimal concentration for each process, is analyzed using inductively coupled plasma atomic emission spectroscopy(ICP-AES). In addition, the silicon wafer is recovered through optimum etching conditions for silicon recovery, and the solar cell is remanufactured using this recovered silicon wafer. The efficiency of the remanufactured solar cell is very similar to that of a commercial wafer-based solar cell, and sufficient for use in the PV industry.

• Environmental Analysis Health and Toxicology
• /
• v.1 no.1
• /
• pp.81-86
• /
• 1986

After oral administration of $^{14}$ C-labelled $N^{G}$-mono[$^{14}$ C-methyl］-L-arginine into rats, 66.3% of the administered radioactivity has been recovered in the urine, and 86.2% of the total of the recovered radioactivity is recovered in the first 24-hr urine. Distributions of the radioactivity of the acidic, basic, and neutral portions and unmetabolized $N^{G}$-monomethyl-L-arginine are 33.3%, 40.2%, 12.5% , and 0.3%, respectively. The radioactivity corresponding N-monomethylurea is about 50% of the neutral portion and 6% of the administered radioactivity.ity.

• Mycobiology
• /
• v.28 no.4
• /
• pp.197-201
• /
• 2000

The distribution and occurrence of aquatic zoosporic and terrestrial fungi were investigated in 21 well waters in Assiut governorate, Egypt. Using a zoospore capture technique, 923 colonies of aquatic freshwater fungi were recovered from well waters, out of which 811 colonies reached sexual maturity. These colonies were assigned to 23 species which belong to 11 genera. The most common genera were Achlya, Saprolegnia and Dictyuchus. Using two types of media, 35 species in addition to 2 varieties of terrestrial fungi which belong to 18 genera were also recovered. The most frequent glucophilic genera (recovered on glucose-Czapek's agar at $28^{\circ}C$) were Aspergillus, Penicillium and Fusarium. The results obtained on cellulose-Czapek's agar at $2^{\circ}C$ were basically similar to those on glucose agar and the most frequent genera were Aspergillus, Penicillium and Fusarium followed by Chaetomium and Cephalosporium.

• Journal of Embryo Transfer
• /
• v.12 no.2
• /
• pp.219-226
• /
• 1997

Follicular fluid influxed into the oviduct during ovulation may affect movement of sperm for fertilization Thus, in this study, the effect of follicular fluid, obtained from follicles of l0mm in diameter, on number and quality of sperm recovered by swim-up separation was investigated and sperm-movement stimulating components extracted from follicular fluid with methanol and isooctane were separated by gel filtration with Sepadex G-1O, G-25 and G-1OO gels, and were isolated by electrophoresis with SDS-PAGE mini gel. The results obtained were as follows; 1. Diluted follicular fluid stimulated sperm movement. 2. Sperm-movement stimulating factors were in methanol extract. 3. Sperm-movement stimulating effect of methanol extract appeared in fraction I among fractions recovered after gel filtration. And the fraction I contained proteins indicating 4 major bands as about 47, 43, 25 and 14 kilodaldons and 5 minor bands as about 67, 58, 23, 22 and 21 kilodaldons. 4. The fraction I recovered from G-100 gel showed significantly low percentage of motile sperm and had no protein indicating the band of 67 kilodaldons among the minor bands.

• Korean Journal of Rural Living Science
• /
• v.10 no.2
• /
• pp.78-84
• /
• 1999

This study was performed to find out the usefulness of chestnut powder recovered from the inner layer, which used to be discarded. After the Physicochemical properties of the chestnut powder were examined, breads were prepared with 10-50% of chestnut Powder and the sensory quality was compared by QDA. Bread could be made even using up to 50% of chestnut powder, and in 20-30% of chestnut powder, the sensory quality was acceptable enough compared with wheat bread. Even though the low purity of the chestnut powder affected the flavor and color, the breads contained it were generally acceptable. Therefore, the chestnut powder recovered from the inner layer can be used as the effective food resource as itself, and with the higher purification to remove inner layer, it can be applied to more diverse food.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.637-641
• /
• 2003

Abrasive powders were recovered from electrical industry sludge by simple physical separation for their recycling. The raw electrical industry sludge was filter pressed, dried, dispersed and then classified by air classifier at various conditions. The three kinds of particles with different particle size distribution were classified by controlling rotor speed and air volumes of the classifier. The recovered abrasive powders, which are classified at 5,000,9000 and 13,000 rpm of rotor speed, are almost same properties to raw pumice, garnet and rouge powders, respectively. The results of particle size analysis, X-ray diffraction and SEM observation show that the recovered powders can be reused as an abrasive powders.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.58-63
• /
• 2007

This paper sums up all the different steps broached in this project : The NIR spectroscopy technique has been studied and implemented at CTP using a mobile spectrometer device and different optical materials. Methods, based on statistical data analysis (in particular PLS regressions), have been investigated. A laboratory "prototype" using these techniques and methods has been developed in order to control the recovered papers quality, in terms of humidity percentage and sample composition (paper, board, contaminants).

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.8
• /
• pp.359-364
• /
• 2003

Ageing characteristics of RTV coating materials by corona discharge have been studied. The hydrophobicity recovery of RTV coating materials with 300${\mu}{\textrm}{m}$ thickness was identical with a bulk silicone materials. The RTV coating materials hydrophobicity has been almost lost when its were discharged during 40 seconds by corona discharge of 10㎸, and recovered after about 45 hours. The resistivity of RTV coating materials has not been recovered after 45 hours, though after 80 hours the initiation resistivity value has been recovered up to 95%. There was no critical change of compounds(such as Si and Al) on RTV surfaces by the corona discharge treatment until 100 seconds. In the test of arc erosion, it was seen that the coating sample with silicone rubber as a base material have more longer burn-out time than other samples with FRP or glass base.

• Journal of the Korean institute of surface engineering
• /
• v.25 no.3
• /
• pp.150-157
• /
• 1992

A recovery process of pure alumina powder from the wasted aluminum etching solution of electrolytic condenser works was studied. The possibility of this process was considered in the basis of thermodynamic data nad physico-chemical properties for the recovered materials were tested. In order to obtain pure alumina, Fe3+ and Cu2+ in the solution as impurities were solvent-extracted, respectively, and then, Al3+ was precipitated by changing the pH of the solution. As the results, more than 99.9% of Al3+ in the solution was recovered by the precipitation method. The weight of the precipitate was reduced to about 65 wt.% of the original one by calcination and the sizes of the recovered powders were in order of 3-5$\mu\textrm{m}$. The precipitates were transformed to $\alpha$-Al2O3 at the calcination temperature about 120$0^{\circ}C$.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.344-356
• /
• 2021

CRAFT is a tweakable block cipher introduced in 2019 that aims to provide strong protection against differential fault analysis. In this paper, we show that CRAFT is vulnerable to side-channel cube attacks. We apply side-channel cube attacks to CRAFT with the Hamming weight leakage assumption. We found that the first half of the secret key can be recovered from the Hamming weight leakage after the first round. Next, using the recovered key bits, we continue our attack to recover the second half of the secret key. We show that the set of equations that are solvable varies depending on the value of the key bits. Our result shows that 99.90% of the key space can be fully recovered within a practical time.