• 제목/요약/키워드: recoil mechanism

검색결과 16건 처리시간 0.026초

저반동 전차포의 주퇴력 저감 연구 (A Study on Recoil Force Reduction Using a Low-recoil Direct Gun)

  • 박진생
    • 한국기계가공학회지
    • /
    • 제15권5호
    • /
    • pp.125-130
    • /
    • 2016
  • A low-recoil direct gun is useful in reducing the fire impulse generated by using a traditional shell. To apply a control equation to an AMESim Model, we have formulated a control equation for a recoil mechanism from the free object diagram. By modeling this equation, we have been able to compare the recoil distance and recoil force of a low-recoil direct gun. Here, we can analyze the recoil characteristics between traditional direct guns and low-recoil direct guns with perforated muzzle brakes. It is possible to mount a low-recoil direct gun with a perforated muzzle brake on a lightweight tracked vehicle by reducing its fire impulse.

사격충격력 저감을 위한 연식주퇴계의 제어 (Control of a Soft Recoil System for Recoil Force Reduction)

  • 신철봉;배재성;황재혁;강국정;안상태;한태호
    • 한국소음진동공학회논문집
    • /
    • 제18권7호
    • /
    • pp.764-774
    • /
    • 2008
  • A fire-out-of-battery(FOOB) mechanism, which is a new recoil technology, can reduce dramatically the level of a recoil force compared to the conventional recoil system. The FOOB mechanism pre-accelerates the recoil parts in direction opposite of conventional recoil before ignition. This momentum of the recoil parts due to pre-acceleration can reduce the firing impulse. In this paper, the dynamics of the recoil system with this FOOB mechanism is formulated and simulated numerically. The results of the simulation show that the FOOB system can reduce the recoil force and stroke compared to the conventional system under normal condition. When the fault modes happen, the FOOB system may not perform well and may be damaged seriously due to excessive recoil force and stroke. Hence, the control of the fault modes is necessary to achieve the normal operation of the FOOB system. The results that an additional MR damper enables the FOOB system to perform well under all firing condition.

주퇴력 저감을 위한 연식 주퇴 메커니즘의 매개변수에 관한 연구 (A Study on Parameters of Soft Recoil Mechanism for Reduction of Recoil Force)

  • 양태호;이영신;이규섭;전상배;강국정
    • 대한기계학회논문집A
    • /
    • 제36권7호
    • /
    • pp.823-828
    • /
    • 2012
  • 연식주퇴 메커니즘은 전방 운동량으로 주퇴력을 감소시키는 메커니즘이다. 연식주퇴 메커니즘에 영향을 미치는 매개변수는 사격 각도, 복좌기의 초기 압력, 발사위치등과 같이 다양하게 존재한다. 이런 매개변수들은 연식주퇴 메커니즘에서 전방 운동량을 결정짓는 요소가 된다. 연식주퇴 메커니즘의 설계를 위해 몇 가지 적당한 조건들을 고려하여 전방 운동량에 영향을 미치는 매개변수들에 대해 연구하였다. 여러 가지 매개변수들 중에서 복좌기의 초기 압력과 사격 위치가 전방 운동량에 영향을 미치는 중요한 요소로 확인하였다. 복좌기의 초기 압력이 180 일 때, 주퇴력이 가장 낮은 값을 가진다.

마찰스프링의 주퇴복좌장치 적용성 연구 (Application Study of Recoil Mechanism using Friction Springs)

  • 차기업;김학인;조창기
    • 한국정밀공학회지
    • /
    • 제29권3호
    • /
    • pp.324-333
    • /
    • 2012
  • The conventional medium and large caliber gun, in general, utilize the hydro-pneumatic recoil mechanism to control the firing impulse and to return to the battery position. However, this kind of mechanism may cause the problems like the leakages and the property changes in oil and gas due to the temperature variations between low and high temperatures. Accordingly, the friction spring mechanism has recently been researched as an alternative system. The friction spring mechanism consists of a set of closed inner and outer rings with the concentric tapered contact surfaces assembled in the columnar form, and can only be used under the compression load. When the spring column is axially loaded, the tapered surfaces become overlapped, causing the outer rings to expand while the inner rings are being contracted in diameter allowing an axial displacement. Because of friction between tapered contact surfaces, much higher spring stiffness is obtained on the stroke at the increase in load than the stroke at the decrease. In this paper, the dynamic equations regarding the friction spring system and the design approach have been investigated. It is also tried for a dynamic model representing the recoil motion and the friction spring forces. And the model has been proved from firing test using a gun system with friction springs. All the results show that the recoil mechanism using friction springs can substitute for the classic hydro-pneumatic recoil system.

사격충격력 저감을 위한 연식주퇴계의 제어에 관한 연구 (A Study on Control of a Soft Recoil System for Recoil Force Reduction)

  • 신철봉;배재성;황재혁;강국정
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.560-564
    • /
    • 2007
  • In order to reduce the level of recoil force, new recoil technology must be employed. The present study discusses a soft-recoil mechanism that can reduce dramatically the recoil force. The dynamics of the soft-recoil system with hydraulic dampers are described and simulated. The results of the simulation show that FOOB system can reduce the recoil force and the recoil stroke compared to conventional systems. However, the FOOB system is not able to perform well when the fault modes happen. Hence, this study uses the MR damper to achieving FOOB under fault modes.

  • PDF

A Development of Recoil & Counter Recoil Motion Measurement System Using LVDT

  • Park, Ju-Ho;Hong, Sung-Soo;Joon Lyou
    • Transactions on Control, Automation and Systems Engineering
    • /
    • 제2권3호
    • /
    • pp.214-219
    • /
    • 2000
  • This paper presents a recoil and counter recoil motion measurement system using linear variable differential transformers (LVDT). The output of the LVDT is obtained from the differential voltage of the secondary transformers. Since a transducer core is attached to the motion body, the output is directly proportional to the movement length of the core. Displacement, velocity and acceleration are measured from the LVDT. With a comparison between the measurement result and the reference value obtained by the highly accurate Vernier calipers, it is proved that the measurement system with the LVDT is applicable to the test of the moving part of the mechanism with better accuracy.

  • PDF

주퇴운동에 대한 제퇴기의 효과에 관한 연구

  • 이영현;강국정
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.1088-1092
    • /
    • 1996
  • This paper represents how a muzzle brake affects the dynamic characteristics of the recoil system. A muzzle brake is a device attached to the muzzle for the express purpose of diverting the propellant gas stream from its original path, thereby creating a foreward thrust on the recoiling gun which is in opposition to its rearward motion. In order to obtain the full advantage of a muzzle brake, it is necessary that the recoil system of a gun be designed for the purpose.

  • PDF

나노 구조가 형성된 열전달 표면에서의 임계 열유속 증진 메커니즘 (Critical Heat Flux Enhancement Mechanism on a Surface with Nano-Structures)

  • 김동억
    • 대한기계학회논문집B
    • /
    • 제38권7호
    • /
    • pp.619-624
    • /
    • 2014
  • 나노 구조가 형성된 열전달 표면에서 유체의 비등 시 임계 열유속 값이 나노 구조가 없는 표면보다 현저히 증가한다는 것은 잘 알려진 사실이다. 다수의 물리적 메커니즘들이 이러한 나노 구조에서의 임계 열유속 증진 현상을 설명하기 위해 제안되어 왔다. 하지만 지금까지 대부분의 연구들은 정성적인 결과를 제시해 왔으며, 이러한 현상을 일반적으로 설명할 수 있는 이론은 아직 확립되지 않았다. 본 연구에서는 나노 구조가 형성된 표면에서의 임계 열유속 증진에 관한 정량적인 메커니즘을 증기 반동력 및 표면 접착력에 기초하여 제안하고자 한다. 특히, 본 연구에서는 임계 열유속 증진 현상을 표면에 형성된 나노 구조로 인한 액체, 증기, 고체의 삼중선 길이의 증가 및 나노 구조와 액체 사이의 접착력에 근거하여 설명하였다.

반동방식 충격기구의 완충시스템 해석 (Analysis of Isolation System for Impulsive Force Device with Recoil Mechanism)

  • 김효준;류봉조
    • 한국소음진동공학회논문집
    • /
    • 제15권3호
    • /
    • pp.272-279
    • /
    • 2005
  • 이 논문에서는 프로토타입(prototype) 고충격력 기구에 대한 최적의 절연시스템이 연구된다. 이 목적을 위해 첫째, 고충격력 기구의 특정한 작동조건하에서 인체의 거동과 전달력이 고안된 시험 장치를 이용한 실험을 통해 분석된다. 최적 동흡진기를 설계하기 위하여, 파라미터 최적과정이 충격량과 전달력의 실험결과를 토대로 한 단순화된 절연시스템 모델을 사용하여 이루어진다. 최종적으로, 충격완화 변위와 전달력의 구속조건을 만족시키는 파라미터 하에서, 프로토타입 고충격력 기구에 대해 최적 설계된 절연시스템의 성능이 실험에 의해 평가된다.

MECHANISM OF KEYHOLE FORMATION AND STABILITY IN STATIONARY LASER WELDING

  • Lee, Jae Y.;Sung H. Ko;Choong D. Yoo
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.644-651
    • /
    • 2002
  • The formation and stability of stationary laser weld keyholes are investigated using a numerical simulation. The effect of multiple reflections in the keyhole is estimated using the ray tracing method, and the free surface profile, flow velocity and temperature distribution are calculated numerically. In the simulation, the keyhole is formed by the displacement of the melt induced by evaporation recoil pressure, while surface tension and hydrostatic pressure oppose cavity formation. At laser powers of 500W and greater, the protrusion occurs on the keyhole wall, which results in keyhole collapse and void formation at the bottom. Initiation of the protrusion is caused mainly by collision of upward and downward flows due to the pressure components.

  • PDF