• 토지주택연구
• /
• 제10권4호
• /
• pp.51-59
• /
• 2019

The government is encouraging the notice of obligatory reclaimed asphalt as a result of the economic and social positioning of green growth to reduce the amount of waste resources and to solve natural resource problems by recycling continuously generated waste resources. However, it is necessary to develop application guideline for each application to apply reclaimed asphalt to the site because quality control of the reclaimed asphalt is difficult and the specifications are ambiguous as well. Therefore, in this study, the mix design, quality test, performance test, and finite element analysis about reclaimed Asphalt Pavement were conducted to develop application guideline for reclaimed hot asphalt. The mix design was carried out for the comparative general hot mix asphalt mixture, the reclaimed hot mix asphalt mixture using the additive, and the reclaimed hot mix asphalt mixture without the additive. Indirect tensile strength and tensile strength ratio tests were used to characterize the reclaimed hot mix asphalt mixture. Using the results of dynamic modulus test and FWD test for KPRP analysis and finite element analysis, the performance life was evaluated for general pavement and pavement using recycled aggregate. Finally, the life cycle cost analysis was used to compare and analyze the economics of reclaimed asphalt concrete pavement.

• 한국방재학회 논문집
• /
• 제3권1호
• /
• pp.133-140
• /
• 2003

본 연구에서는 회수아스팔트 혼합물의 재활용을 위해서 상온재생 아스팔트 혼합물과 재래식 밀입도 13mm 아스팔트 혼합물을 사용하여 아스팔트 혼합물의 실험적 공용특성을 파악하기 위하여 간접인장강도 시험과 피로파괴 시험을 수행하였다. 간접인장강도 시험은 $10^{\circ}C,\;20^{\circ}C$에서 수행되었으며, 피로파괴시험은 500kgf, 400kgf 그리고 300kgf의 반복하중 아래에서 수행되었다. 간접인장강도 시험결과 재생 아스팔트 혼합물은 재래식 아스팔트 혼합물에 대해서 각 온도대별 약 90%의 성능을 보였으며, 피로파괴 시험의 결과에 의하면 재생 밀입도 아스팔트 혼합물은 반복하중 500kgf, 400kgf, 및 300kgf에 대해서 각각 재래식 아스팔트 혼합물의 70%, 55%, 30%의 성능을 보여주었다.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.63-74
• /
• 2014

PURPOSES: This research is to evaluate the mechanical performance of different types of Hot Mix Asphalt (HMA) pavement cells prepared for MN/Road field testing section through an extensive experimental analysis of air voids and simple statistical evaluation tools (i.e. hypothesis test). METHODS: An extensive experimental work was performed to measure air voids in 82 asphalt mixture cores (238 samples in total) obtained from nine different types of road cell located in MN/Road testing field. In order to numerically and quantitatively address the differences in air voids among the different test Cells built in MN/Road, a simple statistical test method (i.e. t-test) with 5% significance was used. RESULTS: Similar trends in air voids content were found among the mixtures including conventional HMA, Reclaimed Asphalt Pavement (RAP) and Warm Mix Asphalt (WMA) combined with taconite aggregate this provides support to the use of RAP and WMA technology in the constructions of asphalt pavement. However, in case of acid modified HMA mixtures, significant differences in air void content were observed between on the wheel path and between wheel path location, which implies negative performances in rutting and thermal cracking resistances. Conclusions : It can be concluded that use of RAP and WMA technology in the construction of conventional asphalt pavement and the use of PPA (Poly Phosphoric Acid) in combinations with SBS (Styrene Butadiene Styrene) in asphalt binder production provide satisfactory performance and, therefore, are highly recommended.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.97-105
• /
• 2018

PURPOSES : Asphalt concrete pavement is damaged by various causes such as traffic and environmental loads. The distressed pavement should be maintained by various methods to provide a comfortable and safe pavement for the driver. This study evaluates the effect of adding a mixing procedure to enhance the mixture quality in the hot in-placement recycled asphalt pavement method, which is an asphalt-pavement maintenance method. METHODS : Various test methods such as Marshall stability and dynamic stability, were employed to estimate the recycled asphalt mixture with and without an additional mixing, using the hot in-placement recycled asphalt pavement method. RESULTS : The mixture samples used in this study were taken before and after the addition of the mixer in the hot in-placement recycled asphalt pavement method (HIR) at field construction sites in GongJu and JinJu in South Korea. The test results of both mixtures satisfied the asphalt-mixture standard specifications. CONCLUSIONS : This study confirmed that adding a mixer in the HIR method results in a well-mixed new asphalt mixture, rejuvenator, and reclaimed asphalt mixture.

• 한국도로학회논문집
• /
• 제3권1호
• /
• pp.177-184
• /
• 2001

본 연구는 노후된 폐아스콘으로부터 폐아스팔트를 추출하여 ASTM방법을 이용해서 폐아스팔트의 화학적 조성을 성분별로 분리하고, 이들을 신제아스팔트의 구성성분과 비교하여 노후시 변화하는 성분들을 파악하였다. 이러한 분석결과를 토대로 폐아스팔트의 성상복원을 위한 재생첨가제를 제조하여 재생첨가제를 10%, 20% 첨가했을 때 폐아스팔트의 복원정도를 침입도$(25^{\circ}C)$, 신도, 연화점, 점도의 네 가지 시험을 수행하여 폐아스팔트의 물성 변화 특성을 고찰하였다. 연구결과에 의하면 아스팔트의 노화시 아스팔텐의 함량이 하고, 방향족성분의 함량이 감소함을 알 수 있었고, 증가한 아스팔텐의 함량을 줄여주기 위해 아스팔트의 방향족 성분자 화학적으로 비슷한 아로마틱기유를 사용하여 재생첨가제를 제조했다. 그리고 제조된 재생첨가제를 노화가 진행된 폐아스팔트에 무게 비로 20% 첨가했을 때, 신제아스팔트 (AP-3)와 유사한 정도로 성상이 복원됨을 확인할 수 있었다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.137-142
• /
• 2017

PURPOSES :The objective of this study is to evaluate the performance of asphalt mixtures containing inorganic additive and a high content of reclaimed asphalt pavement (RAP). METHODS : The laboratory tests verified the superior laboratory performance of inorganic additive compared to cement, in cold recycled asphalt mixtures. To investigate the moisture susceptibility of the specimens, tensile strength ratio (TSR) tests were performed. In addition, dynamic modulus test was conducted to evaluate the performance of cold recycled asphalt mixture. RESULTS :It was determined that NaOH solution mixed with $Na_2SiO_3$ in the ratio 75:10 provides optimum performance. Compared to Type B and C counterparts, Type A mixtures consisting of an inorganic additive performed better in the Indirect tensile strength test, tensile strength ratio test, and dynamic modulus test. CONCLUSIONS : The use of inorganic additive enhances the indirect strength and dynamic modulus performance of the asphalt mixture. However, additional experiments are to be conducted to improve the reliability of the result with respect to the effect of inorganic additive.

• 한국건설순환자원학회지
• /
• 제15권1호
• /
• pp.16-25
• /
• 2020

• 한국방재학회 논문집
• /
• 제9권3호
• /
• pp.1-7
• /
• 2009

순환골재를 도로의 기층재료나 보조기층용 골재로 활용하기 위하여 1980년대 초부터 미국과 유럽의 여러 나라에서 연구가 진행되었다. 우리나라에서도 1990년대 도심지 재개발 및 아파트 재건축의 증가로 건축폐기물이 다량으로 발생하여 이에 대한 대책을 마련하기 위한 방안으로 재활용 논의가 있었으나 실용화되지 못하였고 1994년 자원의 절약과 재활용 촉진에 관한 법률이 제정되어 일정 공사금액 이상의 건설사업자가 건설현장에서 배출되는 건설폐자재를 재활용화 하도록 규정한 이후에 구조물 채움재나 도로의 보조 기층재, 성토 및 복토용으로 활용되다가 최근에 포장재료로 활용하기 위한 연구가 수행되고 있다. 건설폐자재의 활용은 자원재활용과 함께 자연환경을 보호하고 부족한 골재난을 해소할 수 있으며 양질의 재료를 이용하여 포장의 공용성을 확보할 수 있어 여러 측면에서 효과적이다. 본 연구에서는 순환골재를 이용하여 자원을 재활용하고 에너지 소비를 절감 할 수 있는 상온 재생 아스팔트 혼합물 개발을 위한 연구 수행결과를 정리 하였다.

• 한국건설순환자원학회지
• /
• 제16권2호
• /
• pp.40-45
• /
• 2021