• Nuclear Engineering and Technology
• /
• 제35권4호
• /
• pp.261-273
• /
• 2003

The characteristics of the recirculation operation of LMR which are different from the conventional plants such as PWR and fossil fuel plants were investigated using a computer code TSGS developed in this study. For simulating the transient behavior of the steam generation system, a water level control algorithm utilizing digital control hardware features was introduced. By investigation, the function of the recirculation operation was defined, the major features of the operation were found. Also good performance of the level control algorithm was confirmed.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.74-81
• /
• 2013

A numerical design analysis is conducted to search for an optimal shape of outlet in a rotating-disk CVD reactor. The goal is to suppress flow recirculation that has been found in a reactor having a sudden expansion of flow passage outside of the rotating disk. In order to streamline gas flow, the sidewall at which the flow in the Ekman layer is impinged, is tilted. The axisymmetric laminar flow and heat transfer in the reactor are simulated using the incompressible ideal gas model. For the conventional vertical sidewall, the flow recirculation forming in the corner region could be expanded into the interior to distort the upstream flow. The numerical results show that this unfavorable phenomenon inducing back flow could be dramatically suppressed by tilting the sidewall at a certain range of angle. The assessment of deviation in deposition rate based on the characteristic isotherm illustrates that the sidewall tilting may expand the domain of stable plug-like flow regime toward higher pressure. A physical interpretation is attempted to explain the mechanism to suppress flow recirculation.

• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.591-605
• /
• 2010

Recirculation of airmass in coastal region occurs because of the change from land to sea breeze and was shown to produce a contrary result on air quality. This study examines the numerical simulation to analyze the effect of recirculation flow in Gwangyang Bay, Korea. For this purpose two case studies are performed by the WRF-FLEXPART-CMAQ modeling system, each for a different Meso-Synoptic Index. Additionally this research make a comparative study of large domain (Domain L) and small domain (Domain S). The horizontal wind fields are simulated from WRF. Changes in the land-sea breeze have an effect on the particle dispersion modeling. The numerical simulation of air quality is carried out to investigate the recirculation of ozone. Ozone is transported to eastward under strong synoptic condition (Case_strong) because of westerly synoptic flow and this pattern can confirm in all domain. However ozone swept off by the land breeze and then transported to northward along sea breeze under conditions of clear sky and weak winds (Case_weak). In this case re-advected ozone isn't simulate in Domain S. The study found that recirculation of airmass must be concerned when numerical simulation of air quality is performed in coastal region, especially on a sunny day.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.110-118
• /
• 2021

액체로켓엔진의 구성품인 연소기 산화제 개폐밸브는 연소기에 공급되는 산화제를 제어한다. 밸브가 닫힐 때 산화제는 연소기 대신 재순환 유로로 공급되며, 이때 발생한 수격현상에 의해 설계 기준보다 큰 압력이 발생할 수 있다. 본 연구에서는 액체질소를 운용 유체로 사용하여 재순환 유로의 초기 조건에 따른 수격 시험을 수행하였으며, 그 결과 발생하는 압력파를 분석하였다. 초기 조건에 따라 재순환유로 내부 압력파의 경향이 달랐으며, 특히 재순환 유로 끝단에서는 응축에 의한 수격이 발생할 때 압력이 최대로 커질 수 있음을 확인하였다.

• 항공우주기술
• /
• 제4권1호
• /
• pp.196-202
• /
• 2005

액체추진기관의 극저온 추진제 공급부에서 추진제의 주입 후 대기시간 동안의 온도상승은 배관내의 geysering 현상 및, 점화시 터보펌프에서의 cavitation을 발생시킬 수 있다. 본 자료에서는 이런 문제를 해결하는 방법 중 하나인 재순환배관 방식에 대하여 KSLV-I 예비안의 산화제부 형상을 바탕으로 LOX를 산화제로 사용한 경우에 있어서 그 성능을 파악하였다. 또한, 다양한 parametric study를 통하여 재순환배관의 설계인자를 찾고자 하였다. 재순환배관의 직경, 초기 LOX 온도, 재순환배관 높이, ullage 압력, 열전달 계수 등의 변화에 의한 영향 및 추가적인 He 분사를 통한 순환 촉진 효과를 살펴보았다. 상용 열유체해석프로그램인 SINDA/FLUINT를 사용하였고 1차원적으로 해석을 수행하였다.

• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.734-741
• /
• 2010

In this paper, an intake RCV system for low noise turbo engine was developed through optimization process of a geometric path of compressor housing and an open rate of recirculation valve. At first, the critical customer requirement from voice of customer was defined and quality function deployment of an intake RCV system was executed. And then, the renovative concept design using pugh matrix method was selected as final concept for satisfaction of requirement. Simultaneously, system analysis was carried by function diagram and fishbone diagram. Next, control factors and levels for the optimal design were performed. And, the optimal design of an intake RCV system was studied using design of experiment. Conclusively, we achieved not only cancellation tip-out noise at the driving condition but also improvement of NVH commodity through optimization process of an intake RCV system, which is optimal configuration of compressor housing and recirculation valve.

• 한국가시화정보학회지
• /
• 제16권2호
• /
• pp.7-15
• /
• 2018

The fluid-flow characteristics of flue-gas-recirculation (FGR) system can have a significant effect on system efficiency of a sintering plant. The flow characteristics in the system were investigated. A sintering plant with FGR system was modeled. Numerical visualization was performed and flow characteristics were analyzed. Characteristics of the flow distribution of the branch ducts, the inflow of air into the recirculating hood, and the flow in the hood were discussed. Based on the results three suggestions were proposed: (1) distribution of branch duct flowrate upstream, (2) installation of external air ducts in the hood, and (3) installation of baffles at the hood corners. The suggestions were tested numerical and experimental visualization methods. The suggestions were effective and confirmed to be applicable to the actual sinter plant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1499-1504
• /
• 2004

Flue gas recirculation (FGR) is a method used to control oxides of nitrogen ($NO_x$) in combustion system. The recirculated flue gases resulted in slow reaction and low flame temperatures, which in turn resulted in decreased thermal NO production. Recently, it has been demonstrated that introducing the recirculated flue gas in the fuel stream, that is, the fuel induced recirculation (FIR), resulted in a much greater reduction in $NO_x$ per unit mass of recirculated gas, as compared to introducing the flue gases in air. In the present study, the effect on $NO_x$ reduction in turbulent swirl flame in laboratory scale using FGR/FIR methods through the dilution using $N_2$ and $CO_2$. Results. show the $CO_2$ dilution is more effective $NO_x$ reduction methods because of large temperature drop due to the larger specific heat $CO_2$ compared to $N_2$. FIR is more effective to reduce $NO_x$ emission than FGR when the same recirculation ratio of dilution gas.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.185-194
• /
• 2014

Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study: 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system. 2. Reducing malfunction of controlling emission gas. 3. Made possible precision control.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.1-3
• /
• 2013

The premixed combustion system applying exhaust gas recirculation was investigated to achieve the low pollutant emission and the high thermal efficiency. In this study, it was studied the effects of EGR on the thermal efficiency, $NO_x$ and CO emissions with various EGR ratios and equivalence ratios. As results, when equivalence ratio was increased, thermal efficiency increased and $NO_x$ and CO concentration increased. When EGR was applied, $NO_x$ and CO concentration decreased and thermal efficiency increased. Especially, in the case of 15% of EGR ratio at 0.85 of equivalence ratio, $NO_x$ and CO concentration will be a smaller than these of a current operating condition of the boiler and thermal efficiency was about 1.7% higher.