• 한국작물학회지
• /
• 제41권5호
• /
• pp.608-618
• /
• 1996

Glycine속의 야생 다년생종인 G. tomentella가 가지고 있는 내병성, 고단백 및 다년생 유전자등 유용형질들을 재배콩(G. max)에 도입하기 위한 종간교잡시 염색체수가 다른 4개의 G. tomentella (2n=38, 40, 78, 80) 계통들과 재배콩과의 교잡친화성 검정, 정역간 교잡효과, 교잡엽의 발육비교, 종간 교배적기 등에 대해 시험한 결과를 요약하면 다음과 같다. 1. G. tomentella의 염색체수가 2n=38, 40, 78, 80인 4개 계통과 재배콩인 울산콩, 뱀콩, 단엽콩과의 종간 교잡에서 G. tomentella의 염색체수가 2n=38인 계통과 교배된 것이 교배율 및 교배후 경과일수에 따른 협생존률이 가장 양호하여 2n=38계통이 재배콩과의 교잡친화성이 가장 높은 것으로 나타났다. 2. G. max(cv. Baemkong)와 G. tomentella(2n=38)와 종간교잡에서 정역교잡 효과는 G. max를 모본으로 했을 때가 G. tomentella를모본으로 했을 때보다 교배율이 더 높았고, 엽생존기간도 더 길어 정역교잡의 효과가 인정되었다. 3. G. max(cv. Baemkong)와 G. tomentella(2n=38)와의 종간교잡에서 교잡협의 발육상태를 자가수정된 모본의 협과 비교했을 때 G. max를 모본으로 한 것이 G. tomentella를 모본으로 한 것보다 협당 배주수의 감소율이 적었으나, 교배후 경과일수에 따른 협의 장, 폭 및 무게는 G. max를 모본으로 한 경우가 생육이 저조하였다. 4. 자연조건에서 G. max와 G. tomentella(2n=38)와의 종간 교잡을 할 경우 6월 이나 7월에 하는 것보다 대체로 온도와 습도가 높고 단일조건인 8월 중하구에 하는 것이 교배율이 높았다.

• 한국잠사곤충학회지
• /
• 제28권2호
• /
• pp.28-34
• /
• 1986

The general combining ability (GCV), the specific combining ability (SCA) and the reciprocal combining ability (RCA) effects wereobtained by 8$\times$8 diallel crosses of the silkworms with four Japanese races and four Chinese races, total eight lines. The result are as follows ; 1. The general combining ability (GVA) effects appeared high significant level in the total and the fifth instar periods (TP, FP), a female and a male cocoon weights (FW, MW), a female and a male cocoon layer weights (FL, ML) and a female and a male cocoon layer ratios (FR, MR). Only the reciprocal combining ability (RCA) effects appeared high significant level in the total and the fifth instar periods (TP, FP). 2. The Japanese original silkworm lines varied in the general combining ability effects from -0.864 to 0.578, and the Chinese original silkworm lines did in ones from -0.570 to 1.018. 3. The specific combining ability effects of the silkworm lines made in order of the crossing types of JL (Japanese lines) $\times$CL (Chinese lines)>CL$\times$JL>JL$\times$JL> CL$\times$CL in a total cocoon weights and a cocoon layer weights. 4. The reciprocal combining ability effects of the silkworm lines was in order of the crossing types of JL$\times$CL>JL$\times$JL> CL$\times$CL>CL$\times$JL in a total cocoon weights and cocoon layer weights.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.777-782
• /
• 2002

Reciprocal effects among local breeds and additive and heterosis effects were estimated for total milk production per lactation (TLP), lactation length (LL) and daily milk yield (DMY). Procedures for an optimum crossbreeding system were examined by comparing various crossbred combinations. Three data sets were chosen from the total records collected from 1962 to 1997. Data set I with a total of 5,938 records composed of 9 breed groups for reciprocal crosses, data set II with a total of 6,064 records composed of 5 breed groups for additive and heterosis effects and data set III with a total of 10,319 records composed of 42 breed groups for optimum crossbreeding system were analyzed. The least squares ANOVA was used. The reciprocal crosses between Red Sindhi and the Bangladeshi Local showed significant difference. When the Red Sindhi was used as cow, the cross was superior to the opposite in terms of the three performance traits. The results showed that additive breed effects on both TLP and DMY were positive and highly significant between Bos indicus and Bos taurus, whereas the individual heterosis effects were not significant. In general, any local breeds were improved two to three times by crossing with the Friesian once or twice. However, the effect was reduced when the grading up with the Friesian was repeated more than twice. On the other hand, when the local breed was crossed with the other breeds such as Holstein and Jersey, the improvement of TLP was less. Crossing the F1 cows with the Friesian bull gave further improvement. Almost the same trends were found also for LL and DMY. The local breeds and their crosses are raised mainly for draft animals, then it is recommended that the crossbreds between the local cows and Friesian are used for dairy purposes and more than 75% Friesian blood is used for beef.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권1호
• /
• pp.84-88
• /
• 1998

The aim of this study was to describe growth patterns of mice using Gompertz model. Two distinct types of mice, laboratory mouse $CF_{\sharp1}$ (Mus musculus domesticus) and Yonakuni wild mouse (Yk, Mus musculus molossinus yonakuni) were used. From all possible crosses, there were two parental types and two reciprocal $F_1$ crosses obtained. Individual body weights were measured weekly from birth to ten weeks of age on 321 mice. Standardization to six mice was conducted and only first litters were used. Growth curve parameters were estimated to fit growth data. The results showed that growth among genetic groups were significantly different (p < 0.05) for both sexes, in which parental type of $CF_{\sharp1}$ and Yk had the highest and the smallest values, respectively. Meanwhile, reciprocal $F_1$ crosses were intermediate between parental types. It was concluded that Gompertz model provided and excellent fit for the growth data with a high coefficient determination $(R^2 = 0.999)$.

• 전자공학회논문지A
• /
• 제29A권4호
• /
• pp.14-21
• /
• 1992

An optical novelty filter is implemented using photorefractive materal(BaTiO$_{3}$) as a recording materal and commercial liquid crystal TV as a spatial light polarization modulator. If a signal beam incident at the proper, the loop and the crossing angle inside th e crystal is formed to get maximum diffraction efficiency and BaTiO$_{3}$ as a self-pumped phase conjugation mirror show that phase conjugate reflectivity was 20 times as much as ordinary polarization if signal beam is extraordinary. In this paper, the stoke's theorem which is a reciprocal theorem for which is a reciprocal theorem for beam path is experimentally proved, and good output images were obtained with optical experiment of novelty filter which is formed by use of Michelson interferometer.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권10호
• /
• pp.1353-1358
• /
• 2000

The three-way rotational crossing experiment has been conducted to evaluate heterosis effects on jumping height and body weight. Yonakuni wild mice (Y) and two genetic groups of $CF_{{\sharp}1}$ (C) and C3H/HeNCrj (H) laboratory mice were used as materials. Reciprocal rotational crossing was made by crossing C male${\times}$Y female and Y male${\times}$C female to produce basic group designated $G_0$ and ${G_0}^{\prime}$, respectively. The females of the $G_0$ and ${G_0}^{\prime}$ were mated to the H sire to produce second generation ($G_1$ and ${G_1}^{\prime}$), and at the following generation the replacement females were mated to Y or C sire according to the basic group to produce $G_2$ to $G_3$ and ${G_2}^{\prime}$ to ${G_3}^{\prime}$. Individual jumping height data at Wk6 and body weight data at 1 (Wk1), 3 (Wk3), 6 (Wk6) and 10 (Wk10) weeks of age were analyzed. The results showed that effects of genetic group, sex and interaction of genetic group by sex were significant (p<0.01) for jumping height. For males, 55.34%~79.17% and 54.46%~78.29% of heterosis were reached at $G_1$ to $G_3$ and ${G_1}^{\prime}$ to ${G_3}^{\prime}$, respectively. While for females at $G_1$ to $G_3$ and at ${G_1}^{\prime}$ to ${G_3}^{\prime}$, heterosis effects were 61.53%~80.42% and 47.79%~85.86%, respectively. For body weight, genetic group was a significant source of variation at all ages studied. Sex effect was significant at Wk3, Wk6 and Wk10, and interaction between genetic group and sex was significant at Wk6 and Wk10 (p<0.01). C sires resulted in the highest body weight of offspring, while H sires were the intermediate and Y sires were the lightest. The significant positive and negative heterosis effects for body weight were exhibited. Crossing involved the Y sires in addition to smaller maternal effects of Y dams tended to result in small heterosis.

• 한국자원식물학회지
• /
• 제15권3호
• /
• pp.177-187
• /
• 2002

특정한 현미의 표현형을 보이며, 지질함량이 원품종인 Kinmaze 보다는 높은 거대배(EM 40)와 두꺼운 호분층(LO 1050)과 현미의 립형이 작은립(TAL 214)에 표현형을 나타내는 돌연변이 계통들을 이용하였다. 이것들 간에 특정한 유전자의 집적을 유도하고 상호 정역교배(Reciprocal cross)를 실시하였으며, 그 결과에 따라 지질함량이 높아지는 계통을 선발하고 이용할 목적으로 본 실험을 수행하였다 또한 일부 영양적인 측면에 대한 특성도 조사하여 보고자 지방산 조성에 대해서도 측정하였다. 이들 결과는 다음과 같이 요약할 수 있다. 1, 거대배 돌연변이와 두꺼운 호분층 돌연변이 계통간의 교배조합에서는 거대배의 발현은 호분층의 두께와는 아무런 영향이 없는 것으로 나타났으며, 거대배.두꺼운 호분층 F$_2$개체의 지질함량은 4.15 %을 나타내었다. 이와 같이 높은 지질함량 수치는 Kinmaze을 포함 각각의 교배모본들에 지질함량과 본 실험에서 사용된 다른 어느 교배조합 보다도 높은 함량수치를 나타내었다. 높은 지질함량을 보이는 원인으로는 지질의 경우 현미의 배부분에 많이 축적되는 것으로 알려져 있으므로, 거대배.두꺼운호분층 F$_2$개체는 배의 크기를 크게하는 유전자와 호분층을 두껍게 하는 유전자의 집적에 의한 결과로 그 조건을 충분히 갖춘 것으로 판단된다. 2. 거대배 돌연변이와 작은립의 교배조합에서는 거대배.작은립 F$_2$개체의 지질함량이 3.80 %으로 작은립 교배모본의 2.92 %보다 0.88 %가 높게 나타났지만, 지질함량 증가의 정도는 다른2개의 교배조합에 비하여 낮게 나타났다. 이러한 이유로는 작은 립의 표현형을 보이는 유전자의 영향으로 인하여 거대배가 원래의 배의 크기에 비해 조금 작아진 것에 기인한 것으로 여겨진다. 3. 두꺼운 호분층.작은립 F$_2$개체의 호분층에 두께는 작은립의 교배모본에 비하여 12 $\mu\textrm{m}$가 두껍게 나타났으나, 두꺼운 호분층의 교배모본에 비해서는 6 $\mu\textrm{m}$가 얇게 나타났는데, 이와 같은 결과는 호분층의 두께는 현미의 크기에 일부 영향을 받는 것으로 여겨진다. 두꺼운 호분층.작은립 F$_2$ 개체에 현미의 표현형은 TAL 214과 같은 작은립의 표현형을 보인 것으로 여겨진다. 4. 지질함량의 경우는 3.85 %로 각각의 교배모본 TAL 214 2.92 %, LO 1050 3.01 %에 비하여 0.93 %, 0.84 %가 증가한 것으로 나타났다. 이와 같은 결과는LO 1050의 호분층에 의한 영향으로 여겨지며, 현미의 배의 크기는 LO 1050 만큼 크지는 않아도 두꺼운 호분층의 유전자 집적의 효과가 있는 것으로 판단된다. 지질함량이 상승시키는데도 이와 같은 유전자 집적의 효과가 유효할 것으로 여겨진다. 5. 지방산 조성은 있어서는 품종인 Kinmaze와 각각의 교배모본의 계통과 이 들 F$_2$ 개체에는 그 차이가 유의성을 보일 정도는 아니였다. 그러나, oleic acid의 일부 증가와 linoleic acid의 미미한 감소되는 경향을 보였다. Linolenic acid도 감소는 본 실험의 최종적 결과인 지질함량 증가와 더불어 현미의 지질이용에 도움을 주는 것으로 지방산 조성에도 특정한 표현형의 형질은 유전자 집적에 따른 품질의 변화를 시킬 수 있다는 가능성을 제시하고 있다고 여겨진다. 6. 현재, 거대배 1형(ge-1, 3.68 %), 거대배 2형(ge-2,2.91 %), 두꺼운 호분층(4.63 %), 전분층에 지질함량이 많은 것(3.44 %)등 다양한 표현형을 보이는 여러 가지 계통에 대하여 유전자 집적을 효과를 조사하고 있으므로 벼의 지질함량이 많은 폭으로 증대되는 것에 기대를 하고 있다.

• 생명과학회지
• /
• 제6권4호
• /
• pp.227-233
• /
• 1996

고수량. 고품질의 고추 신풍종을 ?성할 목적으로 피만의 'California Wonder'와 일본재래종 4품종, 이들의 F$_{1}$잡종 12조함 그리고 한국의 F$_{1}$ 3품종을 공시하고, 캡사이시노이드 함량을 조사했다. 그 결과, 캡사이시노이드 함량은 과피보다 태좌에 많이 함유되어 있었다. 태좌의 캡사이시노이드 함량에 있어서 'Yutsufusa', 'Taka no 'Tsume', '청양', '신흥', 그리고 '거성'은 건물중 100g당 1000mg이상 아주 좋은 매운 품종이었다. 그러나 'California Wonder' 그리고 'Fushimi Amanaga' 는 거의 함유되어 있지 않았다. F$_{1}$ 잡종에 있어서 켑사이시노이드 함량은 정역교잡간에 큰 차이가 있었다. 또한 과실의 발육에 따라 켑사이시노이드 함량도 다양해, 개화 4$\sim$5 주후까지는 급격히 증가하고, 그 후는 감소하는 경향이었다.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.58-65
• /
• 2005

A method measuring angular speed and estimating angular acceleration of an automotive wind shield wiper pivot with limited resources has been proposed. Limited resources refer to the fact that processes cannot be operated in real-time with a regular notebook running a Microsoft Windows. Also, they refer to the fact that data acquisition cards have only two general purpose counters as many generic cards do. An optical incremental encoder has been employed for measuring angular motion. To measure the angular speed of the pivot, periods for the encoder's output pulses have been measured as the speed is related to the reciprocal of the period. Since only information acquired from one counter channel is the magnitude of the angular speed, sign correction is necessary. Also the information for the exact time when a pivot passes left and right dead points is also missing and the situation is inherent to the hardware setup. To find out the zero-crossing time of the angular speed, a linear interpolation technique has been employed. Lastly, to overcome the imperfection of the mechanical encoders, the angular speed has been curve fitted to a spline. Angular acceleration can be obtained by a differentiation of the angular speed.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.183-197
• /
• 1990

The purpose of this study was to analyse the magnitude and distribution of stresses using a Photoelastic model from and distal - extension removable partial dentures With four designed indirect retainers. The designs of the indirect retainers were as follows : Design No. 1 : Aker's clasp on 1st bicuspid with no indirect retainer. Design No. 2 : Aker's clasp on 1st bicuspid with indirect retainer on canine. Design No. 3 : Extension of the reciprocal arm of Aker's clasp toward incisal rest on canine. Design No. 4 : Connection with the indirect retainer as in No. 2 and extension of reciprocal arm of Aker' s clasp. A photoelastic model was made of the epoxy resin(PL - 1) and hardner(PLH - 1) and coated with plastic cement -1(PC -1) at the lingual surface of the epoxy model and set with chrome - cobalt partial dentures. A unilateral vertical load of 10kg to the right 1st molar and a vertical load of 10kg to the middle portion of the metal bar crossing both the 1st molars of the right and left, were applied. With the use of specially designed jig, fixture; loading device and the reflective circular polariscope, we obtained the following results : 1. When the unilateral vertical load and the vertical load of the middle portion of the metal bar were applied, design No. 2, 3 and 4 exhibited the higher stress concentration at the root apices and their surrounding tissues of the primary and secondary abutment teeth. 2. When the unilateral vertical load applied to design No. 2,3 and 4 the root apices of the primary and secondary abutment teeth and their surrounding tissues and the nonloaded side of edentulous area exhibited and even stress distribution. 3. When the vertical load was applied, the stress concentration fringe in the primary and secondary abutment teeth was in the order of No. 1,4,2 and 3. 4. No.1 and 4 exhibited the higher distrorted stress concentration at the primary teeth and the edentulous area in the nonloaded side. 5. No.2 design reduced the stresses at the apices of the alveoli of the primary abutment teeth bilaterally as well as on the crest of the residual ridge on the nonloaded side. 6. No. 2 design exhibited the most favorable stress distribution.